I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View Relatedi have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
View 2 Replies View Relatedhow I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Sheets("A").Select
Columns(5).Cells.SpecialCells(xlCellTypeVisible).Copy
Sheets("B").Select
Range("M6").Select
ActiveSheet.Paste
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders()
Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1)
'Move new range down to start at the fisrt data row.
Set rTable = rTable.Offset(1)
rTable.Copy Destination:=Range("EndT2")
I would like to copy a column from a filtered range to notepad. The main steps of this method are these:
1.Copy the original range to a blank range(range1) as text and filter
2.Select the required rows and copy
3.paste the values to A1000 (range2)
4.open notepad and set the filename by a cell value
5.paste the range to notepad
6.delete range1 and range2
Unfortunately, I use macros and vb not so often, so I'm not expert in it.
I have found two useful code, but I don't know how can I combine them.
For step 1
Sub Copy_Filter_Range() ...
I'm trying to do is copy filtered data. I select my column and copy it, filtered, no problem. But then my code bugs out when it tries to copy the next column.
If Sheets("CT Summary"). Cells(4, 6).Value = "P1264" Then
Sheets("Mam Roll-up").Activate
'Copy CEID's.
Range("L4:L134").Select
Selection.SpecialCells (xlCellTypeVisible)
"Selection.SpecialCells (xlCellTypeVisible)" works in the first block, but bugs out on the second.
I need code to copy rows from a filtered list on one worksheet and insert at a specific point in another worksheet.
What I would do if doing it manually is to "select the visible cells, copy, go to the other worksheet, select the point I wanted to insert the data and select Insert Copied Cells".
When I try to record this with the macro recorder I don't see the option Insert Copied Cells.
Need macro that changes the text in a particular field. Previously, the column to change was column 46 (AT), but now the column is column 1 (A). If I adjust the last line and run the macro, I get this error message: "Compile error: Invalid or unqualified reference".
. AutoFilter Field:=1, Criteria1:="To be capped" 'TYPE
. AutoFilter Field:=29, Criteria1:="OPEN" 'STATUS
.columns(1).Offset(1,0).Resize(rng.Rows.Count - 1,1).SpecialCells(xlCellTypeVisible).Value = "Capitalised"
I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
View 9 Replies View RelatedHow would I modify the code belwo to insert the copied range above the existing data in the worksheet? (The part giving me the problem is in bold italics.) Also, how would I modify this code so that it only copies the filtered data, NOT including the column headers?
View 14 Replies View RelatedMy first worksheet contains the following information:
Column A contains parent category names (e.g. colours)
Column B contains lookup values (non-unique)
Column C contains value to return
Each subsequent worksheet is for a single parent category (i.e. a sheet per unique category)
I'm unsure how to write some code that will return column C for each worksheet
Example of first worksheet:
A
B
C
1
Group
Item
Amount
[code]....
From this, my code creates 4 new sheets named Red, Orange, Blue and Green with column A containing the item numbers that relate to the worksheet name in the table in the first sheet (e.g. column A in sheet Red contains item numbers 1 to 6 inclusive):
A
B
1
Item
Amount
2
1
x
[code]....
In column B, I could like to return the values in column C from the table in column C that are only specific to that worksheet name.
I think I want to filter column A in the first sheet against the sheet name and then perform a VLOOKUP on the filtered data or would using a dynamic range be better?
Countif can be used to count the no. of occurrence of a certain value within a range. However, if the range is being filtered, can the no. of occurrence be counted?
View 3 Replies View RelatedHow do I know how many rows are selected by rngToFilter? I need to add in a conditional statement if its 0.
For Each rngCell In rngUnique
sheetName = rngCell.Value
ThisWorkbook.Worksheets(sheetName).Delete
rngToFilter. AutoFilter Field:=4, Criteria1:=rngCell.Value
rngToFilter.AutoFilter Field:=28, Criteria1:="="
Set rngFiltered = rngToFilter.SpecialCells(xlCellTypeVisible)
Worksheets.Add
rngFiltered.Copy ActiveSheet. Range("A1")
it seems that the string range.address is not always equal to the complete range address.
I mean, I noticed that, if rg is a range,
Dim rg As range
...
rg<>Range(rg.address)
In the cases I noticed it, the range was an union of many ranges, and the string Address was already big, but not 1 kBite long.
My question: is there a way to get the *complete* range address, without this restriction?
I would like to use the address property, because I would like to have my range without sheet information.
So I use often : rg=Range(rg.address)
I'm using a named range called "VFILTER". This range is my filter range. Once the filter does it's thing, I want to set the first visible cell in column a to a variable...I can't get this right for the life of me!
With Range("VFILTER")
.AutoFilter
.AutoFilter field:=25, Criteria1:="DELETE"
.Offset(1, 0).Resize(. CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible). _
EntireRow.ClearContents
.AutoFilter
JPhelper.ClearContents
JPhelper = "=IF(ISNA(MATCH(B5,J46DATA,0)),FALSE,TRUE)"
.AutoFilter
.AutoFilter field:=25, Criteria1:="TRUE"
.Offset(1, 0).Resize(.CurrentRegion.Rows.Count - 4, 9).SpecialCells(xlCellTypeVisible).ClearContents
'set the first visible cell in column a to variable
Set OutRange = .Offset(1).Resize(.CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible)
End With
I am filtering column S in a sheet to show all rows with a date after the end of the previous month - i.e. >= 01/01/07. What i want to do is clear the contents of those visible cells in column S. I tried the code below (got it on this site) but it works its way up from the bottom of the sheet until it finds the first visible row and then clears the contents of column S in each row above it, whether it is visible or not.
Sheets("Planning").Select
With Range("e2:C2")
.AutoFilter field:=5, Criteria1:="<=" & Sheets("Filtered Statistics").Range("c3")
.AutoFilter field:=19, Criteria1:=">=" & Sheets("Filtered Statistics").Range("d3")
For i = Range("s65536").End(xlUp).Row To 3 Step -1
If InStr(1, ">=" & Sheets("Filtered Statistics").Range("d3"), Cells(i, 19).Value) = 0 Then
Cells(i, 19).ClearContents
End If
Next i
.AutoFilter field:=19
End With
I am looking for a way of finding the maximum value in column H for each row in a pre- filtered range using VBA.
For example, the result of of filtermacro1 may return several records derived from a database of several hundred records. In the example below, the name of the person is in column C, followed by their H column value.
Audrey Perkins, .5
Marc Bloomberg, 2.0
Matt Phillips, .5
Paul Pachson, 2.0
However, the H column value may not be the maximum value for the rows above, as there are other records for Audrey, Marc, Matt & Paul in the database.
If the names are matched to the max value in column H for each record it should read
Audrey Perkins, 1.0
Marc Bloomberg, 3.5
Matt Phillips, .5
Paul Pachson, 6.5
How would I query only the names in a pre-filtered range and obtain the highest value in column H for each ? These values then need to be copied to H7 in a sheet called Detention Register.
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
I often end up in a scenario where I want to be able to move text from one column into another using a formula, which involves pasting a formula down a filtered range... E.g. Column A contains both ID numbers & dates, I want to move ID numbers into Column B, so I apply a filter to all ID numbers using a formula "=A1" and paste it down the filtered range.
It becomes an issue when there is greater than 50 - 60 thousand rows - excel throws an error "selection range is too complex" and disregards the filtered range.
Only thing I can think of would be a VBA script to automate pasting a formula in blocks of 50,000 rows.
Is it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
[Code]...
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory???
ERROR#9 OUT:
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
Is it possible to count the unique entries in a range based on the results of a filter that has been applied? I basically have a column with 2000+ cells that contain some matching values and I only want to count the unique entries. This will need to be a dynamic count as well as the filter criteria can and will change all the time.
View 14 Replies View RelatedAs the subjects states I need to count the unique entries in a filtered range.
View 7 Replies View RelatedI want to filter and then hide the filtered output in a range of data. But after I hiding, when I remove the filter, everything is there again. I don't know how to hide it even filter is removed.
View 7 Replies View RelatedAttached is my basic test file. On sheet1 I've got a Dynamic Named Range of "RawData" ( I think I did that correctly.) The command button just opens a simple form with 3 listboxes. I want to display the Description in the listbox with the value of the listbox the ID, and filtered on Type.
I have sucessfuly figured out how to display the Description and capture the ID as the value for the All Items Listbox.
Here's where I need assistance. How do I filter the range and populate the other 2 boxes? I have been playing with the AdvancedFilter with no success.
Also, how do I resize the width of the listbox to correspond to the width of the Description column?
