1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste ()
Application. ScreenUpdating = False
With Range("B119")
. AutoFilter Field:=2, Criteria1:="<>"
With Range("B120:K239")
Application.CutCopyMode = False
.Copy
With Range("30:43")
.EntireRow.Hidden = True
With Range("64:77")
.EntireRow.Hidden = True
Dim NextRow As Range
Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I'm trying to do is search a range of cells for a range of values AND then see if it matches one other value in another range of cells. In this case,
=SUMPRODUCT((T3:T49="P6")+(T3:T49="P5")+(T3:T49="P4")+(T3:T49="P3"))*(U3:U49="w")
T3:T49 can equal P6 or P5 or P4 or P3 but the cells can only be counted if U3:U49 is 'w' as well
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies View RelatedI want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies View RelatedI have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
Im trying to create a code that pastes the values from a range in one workbook to the end of a table in another.
This is what i got so far but the value only part is missing.
Code:
Dim targetBook As Workbook
Dim sourceWorkbook As Workbook
Dim sourceSheet As Worksheet
[Code]....
I 've a table of data It begins from A4 :f last row
In "A"column dates and in the other coulmns from b:f different data
in cell "g4" Iwil write the new sheet name
In cell "h4" I write the starting date
in "i4" I write the end date
the starting date and the end date are equal to values in range (A:A)
now
i want a vba code to select the part of table which starting with the row where is the starting date-("h4" ).value- is found in range(a:a) ,and the end of the selected part of table can be difined according to the "I4" value.
after selecting this part of date i want to copy it to sheet according to G4 value
I HAVE A SHEET WHERE USER ENTERS DATA, AND WHEN USER ENVOKES MACRO, THE SAID
DATA IS COPIED TO A 2ND SHEET WHERE IT IS STORED. NOW PROBLEM IS THAT IT COPIES
DATA OVER PREVIOUS DATA, BECUASE THE REFRENCE IS NOT DYNAMIC. WHAT I NEED THAT THE DATA IS COPIES EVERY TIME TO THE NEXT ROW,
I have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?
In the code below I am trying to scan a column and copy the values -.03 and lower OR 0.3 and greater. I selected a case to do nothing if the value is within the range of -0.2 To 0.2 but this configuration will still copy over -0.2 and 0.2 values along with the ones outside this range. I tried using -0.3 To 0.3 but that skipped the 0.3 values.
Is the negative throwing this off? The code works perfectly, it just brings the twos with it.
Sub TempCase()
Dim colSearch As Range
Dim celVal As Range
Dim celRow As Range
Sheets("Sheet3").Range("A1").Copy Destination:=Sheets("Sheet2").Range("A65536").End(xlUp).Offset(1, 0)
With Sheets("Sheet3")
Set colSearch = Intersect(.Range("C:C"), .UsedRange)
End With
For Each celVal In colSearch
Select Case celVal.Value
Case -0.2 To 0.2
Case Else
Set celRow = Union(celVal.Offset(0, 1), celVal.Offset(0, 2), celVal)
celRow.Copy Destination:=Sheets("Sheet2").Range("A65536").End(xlUp).Offset(1, 0)
End Select
Next celVal
End Sub
I can copy one range to another with:
Rng1.Copy Rng2
How can I modify this so I only paste over the values (not formulas)?
I want to press a commandbutton and fillacrosssheets but I only want to fill the values, no formatting, no formulas.
The following code works, but carries over the formulas and values.
I tried changing xlFillWithContents constant but without success.
Private Sub CommandButton1_Click()
Dim msg As Integer
Dim ws As Variant
msg = MsgBox("You are about to copy over the existing cells in columns D through P of the Bill Of Materials. Do you want to continue?", vbYesNo + vbQuestion, "Paste Cells")
If msg = 6 Then
ws = Array("Bill of Materials-2", "Admin")
Sheets(ws).FillAcrossSheets _
Worksheets("Bill of Materials-2").Range("D20:BottomLineC"), Type:=xlFillWithContents
End If
If msg = 7 Then
Exit Sub
End If
Application.CutCopyMode = False
Range("A1").Select
End Sub
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
View 9 Replies View RelatedI am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
I have following code (see below) which finds the duplicates within columns, but I require copying and replacing duplicate values within different row cells, as I am currently finding this task hard to implement.
Input Data example:
Name
Short_code
Lng_code
[Code]....
I have another little VBA macro problem that appears to be beyond my coding knowledge.
I have attached a small excel spreadsheet, with a macro recorded (CTRL-P) of what I'm trying to accomplish. Basically, If the data in column A matches a single entry in column F, I need to copy and insert the row (columns F-L) that matches.
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
How to copy a range of RNG cells in a row and make them static in next row anytime a press a button.
View 3 Replies View Relatedis it possible to copy the range without naming the cells? The active cell is I29
The range I want to copy is A1:I28
I want to copy from 8 columns to left and 28 rows up to a cell above the active cell so really it copy range A1:I28
The reason for this is I'm creating a vehicle maintenance program for a mechanic and when he finished the first template, he can copy the entire template (A1:I28) to the next row down for the next maintenance inspection. And so he can continue copying the template one after the other for another vehicle maintenance.
part of a macro I am working on is to narrow down the data from one sheet copy 2 columns and paste it into another sheet, now the issue i am having (workable) is that when i set a range (s2:t5000) to copy it copies all 5000 rows even though 2000 may not have any info in them, as i repeat this process it makes the database a bit messy. is there a way for me to make it only select rows with data?
here is a example of a part of the macro i am working on, keep in mind this will repeat with different criteria
Sub test()
Dim Firstrow As Long
Dim Lastrow As Long
Dim Lrow As Long
Dim CalcMode As Long
Dim ViewMode As Long
With Application
CalcMode = .Calculation
.Calculation = xlCalculationManual
. ScreenUpdating = False
End With
I need to run down a column of numbers in col K. For each row over 28, I need to copy cells A to K in that row and paste to a new worksheet.
View 4 Replies View RelatedI'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
