I am looking for a formula which will insert a word into cell A3 depending on the number in cell A2. For example A2 is between:
0 - 10 then insert the word Div 1
11 -17 then insert the word Div 2
18 - 23 then insert the word Div 3
24 28 then insert the word Div 4
I have a spreadsheet where I want to record the VO2max value (a number indicating the maximum volume of oxygen a person can utilise) of a person.
The VO2max is just a number, normally between 30-60.
I then need excel to look up the VO2max value (i.e. “35”) and give that number a predetermined inputted value name in a different cell (i.e. “low” or “fair”, “good”, “very good” etc etc).
However, as VO2max is also affected by age and *** I also have a column for the participants age and *** and I want excel to use that to make the value name.
E.g. in a 24 year old male a VO2max of 32 is “low”
But, in a 42 year old female a VO2max of 32 would need to be classed “”moderate”
Any ideas how this can be done? can it be done?
I could post the table containing the age range, values and names if I knew how to post an excel sheet on here.
Example below of the data I have. I need to convert dates into DD.MM.YY (8 chars) for SAP. I receive spreadsheets where the date is dd/mm/yy and I use the replace to convert the "/" to ".", then format this column as TEXT. My problem is some of these sheets have hundreds of records and rather than individually scroll through and look for data that requires the "0", is there a way to insert this. I can custom format that it looks as it has the zero, but it is not in the true data.
1.10.12 data should be 01.10.12
11.10.12 this is correct
3.11.12 data should be 03.11.12
3.06.12 data should be 03.06.12 etc
In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
I have six complex functions, which I would like to place in [A2] depending on what is placed in [A1], The functions themselves are quite extensive and I don't want to use any active functions (like INDIRECT) as this will cause slow calculations. [A1] will just be a given name to each of these functions.
View 3 Replies View RelatedMy worksheet has two sheets which has daily continued data. I want to copy two entire columns E and F from Sheet 1 and then in Sheet 2 I want to find a particular word "80 Percent" and then insert two new Entire columns before that word. And after that I want to paste that copied columns of sheet1 in those newly created columns of sheet 2. Is it really possible because the cell reference of the word "80 Percent" in Sheet 2 will change daily. How to create the macro codes for this.
Find attached file : IRCS1.xlsx‎
I have a large spreadsheet with about 18000 rows or data and about 60 columns. I need to a macro to find a specific word in a column like "charge" and anytime that word is found in the column to insert a blank cell in front of it.
Currently the sheet looks like this:Fee AChargeFeeChargeFee AChargeFeeChargeFee AChargeFee AChargeNeed to get it to look like this: (so I can sort and subtotal)Fee AChargeFee AChargeFee AChargeFee ACharge
a macro to the for whichever column I choose.
Trying to have a formula assign a number to a cell depending on a number in that cell.
Example
In all cells in a range from C8 to G13, if there is a 1, i want the number in C20 to show, if there is a 2, whats in
D20, 3/E20, 4/F20, 5/G20, 6/H20
I have an if statement which shows either GP% or average revenue per product. The problem is that GP% needs to be in a percentage format and revenue per product needs to be in number format. 500 is now shown as 50000% or 50% will be shown as 0.5 for example. Is there anyway on changing the format of a cell based on the number?
View 1 Replies View Relatedhow to make a cell a color depending on a number in a different cell? Example...if A2 is 92.6 how would I make D2 blue? But if A2 were 91.9 how would I make D2 red?
View 5 Replies View RelatedIs there a way of getting the first three character of every word or number in a cell ( seperated by spaces) ?
for example in cell E2 I have
BASE 150 WALL COLOUR GREEN
and would like it to read
BAS150WALCOLGRE
I have a approx a 1000 rows that I would like to do this with.
I need this for a tracking sheet of scores. For example, 1 gets 100 points, 2 gets 90 points, 3 gets 80 points, etc. I need to set it up for 10 places. I have no idea and have fiddled with it for two hours now. I need to be able to put a 1 in the cell and 100 appears after I hit enter, etc.
View 5 Replies View RelatedHave problems using find and the Dictionary
What Im trying to do is find a certain word in a string then return the number associated with that word
On sheet 2 in cell C5 I need it to find it from sheet 1 referring it from the word "Drinks 1" thats in Q1 and so on along the row
View 9 Replies View RelatedThe structure of my data (in each cell) is: Alpha Jan 13 35.00 Grams. So it is a record of an item (alpha in this cell), date (Jan 13), and number of grams. I need to find every cell that has this kind of record in a large data set, and after every occurrence of "Grams" I want to extract the number of grams. In this case 35.00. Note the place numbers are not equal. For example in another cell the record could be "Beta March 20 350.00 Grams".
View 5 Replies View RelatedI am trying to retrieve data from another file using the VLOOKUP function however this is only to happen depending on if any of the 3 items of data appear in column 8(H)
OLY
OLY - QUO
OLY - PRO
I have the following and know this is not correct
Sub BlockAllocationsVlookupAll()
Dim x As Long For x = 1 To 65536
If InStr(1, Sheet1.Range("$H$" & x), "OLY") > 0 Then Sheet1.Range("$I$" & x) = Sheet1.Range("$I$" & x) & "sometext" End If Next
End Sub
I know the above doesn't do exactly what needs to be edited to include the Vlookup below
=VLOOKUP(A21,'[001 - Allocations - Blocks.xls]CurrentDayAll'!$1:$65536,9,FALSE)
The other issue is that the cell the VLOOKUP points to first will also change due to the varying length of the report
I need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.
Here is an example of what I need.
If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.
I found lots of threads for inserting rows but not the one I need. I'm trying to insert rows with a macro on the position as specified in a cell f.e. in cell D4 I type the number 80 then the macro has to insert three rows at row 80
View 2 Replies View RelatedI am looking to insert a date in a Cell when another Cell's number has been changed.
I was using If statement as: If(isnumber(f4),TODAY())
but I don't think it is working properly
the cells columns would be, e.g. "Consumables stock" and "date updated".
So if someone changes a number is the "consumables stock" column, date updated column auto-updates with current date. How would I go by in doing this?
I have a workbook with about 8 sheets that is used for pricing vehicles with options.
On the first sheet is the list of about 40 vehicles. I would like to insert a command that IF the quantity of vehicle X = 1 (all others would be blank) then insert a MS Word document that contains the proposal.
The MS Word document could be a worksheet if necessary.
I attached a file with macro7 that prompts the user for text that will get rotated and inserted into the top left corner. The text is in the form "batch xxxx." I need a carriage return between the word "batch" and the numeric string. I guess the input box should have two lines instead of one.
the code does some other stuff which is why it takes a while to execute ....
I have a simple AVG formula and I would like to insert the word "minutes" after the result.
I cant get it to work .... i know this is simple, but I am drawing a blank!
AVERAGEIF('producton 3'!E:E,"march 2008",'producton 3'!G:G)
insert word object
i'm using the following
Dim objX As OLEObject
Set objX = ActiveSheet.OLEObjects.Add(ClassType:="Word.Document.8", Link:=False, DisplayAsIcon:=False)
objX.Border.Color = RGB(255, 255, 255)
Set objX = Nothing
but the objects opens up very small--i have to resize to use...(it is bothersome to the user...)
?can i have the object up with larger width and lenght dimensions..?
Need a function that would insert a letter or a number in front of numbers in a cell for example
column A
3245
I want to insert the prefix "S" in front of the nummbers 3245. so i would hopefully end up with
Column A
S3245
Column B contains geographical Areas. Column C contains a list of business departments.
North Env
North Env
North Ops
North Sales
North Sales
North Sales
South Env
South Maint
South Ops
South Sales
South Sales
South Sales
Etc.
The values and number of these departments will vary. I want to insert lines to sum the totals at the bottom of each geographic area based on the number of different departments. So, for this example, for the North three lines would be inserted. For the South, 4 lines would be inserted.
I had copied a macro from this forum [it was posted by either shg or NBVC], and I modified it to fit my needs. The macro creates a new word document and sends a series of cells from an excel worksheet column to this word file. Everything works fine, but now I need to insert a picture after row 14. I have inserted the code [colored red], but I am sure the syntax or something isn't right. That part doesn't work.
View 2 Replies View RelatedI would like to be able to add vb code to my developing macro that searches within 1 column for the last instance of a particular word, then inserts a blank row under that word. All the data is sorted, so the words will be used multiple times, but I need the row to go under the last instance of each word in the column.
Any way I can open a word doc (template) and insert fields from my spread sheet i can do it with an email.
I have a spreadsheet where I keep customers information on and would like to print a receipts.
insert a word object, type... and resize...
Dim objX As OLEObject
Set objX = ActiveSheet.OLEObjects.Add(ClassType:="Word.Document.8", Link:=False, DisplayAsIcon:=False)
objX.Border.Color = RGB(255, 255, 255)
objX.Height = 200
objX.Width = 600
objX.Top = 300
objX.Left = 100
'-------make active
objX.Activate
Set objX = Nothing
i would like to place the object in a worksheet and have all the rows of data move down below the word object (i.e., below the word object--i do this resizing manually now...)...?
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
View 1 Replies View Related