I want to be able to a place a picture on a workbook based on a cell. In column A, I will run a sql query to pull a list of items. In column B, I have the items formated thus they have a the .jpg. next to item of the picture i.e Hammer.jpg. whereas column A lists Hammer and Column B Hammer.jpg. In column C, I would like the pictures to reside in this column.
So far I have this macro but I can only get two pictures to come up even though my list has 4 items on it.
Sub pic()
Dim x, c, d, a As Long
d = 2
c = 40
For a = 2 To 6
b = Cells(a, 2)
ActiveSheet.Pictures.Insert (myPicture) ActiveSheet.Shapes(ActiveSheet.Shapes.Count).Select With Selection
.ShapeRange.LockAspectRatio = msoFalse .ShapeRange.Height = ActiveCell.RowHeight .ShapeRange.Width = ActiveCell.Width .Placement = xlMoveAndSize End With End If
I am having some trouble with the vba code I'm using to reference pictures. Now please bear with me, I'm don't know vba whatsoever and am copy/pasting what I found on the internet.
The spreadsheet in question is attached....
The issue:
I am trying to show a picture based on the inputs in the cells above. Basically the picture in cell A28 is referenced by the information in cell AI7. The picture in cell D28 should be referenced by the information in cell AI8 and so on.
The problem is that when I enter the code to insert multiple pictures, it comes up with errors.
I'm hoping this is just my lack of programming knowledge and this is an easy fix. Please tell me where I am going wrong.
Also, will there be an issue if I reference the same picture multiple times?
I have written some code to insert pictures into shapes as part of a facility management problem I have.
Code takes the names from a list of pictures (ConditionList) and places each one into a corresponding shape - therefore populating a report on the facility.
Works to the point of inserting the pictures OK but if I refresh the ConditionList by adding or deleting pictures, my shapes dont refresh.
Sub ConditionPics()
Dim ConditionListCount As Integer Dim ShapesCount As Integer Dim ConditionList As Range
On Error Resume Next Application.EnableEvents = False
write a code to insert and auto adjust multiple pictures in a sheet with address of the pictures are in a column, You can download the sheet from below link for details.
I had a macro that worked perfectly by inserting pictures into named ranges throughout the sheet depending on user input. However when I switched to Microsoft Excel 2007, the pictures all go into one cell.
My code looks like this:
Application.ScreenUpdating = False
Dim picnme As String Dim rng As Range Dim ArrImg Set rng = Range("B5") picnme = Range("B5")
I only copied in a section of it bit it gets rather repetitive. There are over 50 pictures that get inserted into the spreadsheet and it worked fine in the prior version of excel.
How do I insert pictures into Excel's cells, so as to get a mosaic of say 2x3 pics?
Trying to just drag a pic onto a cell does not make the pic sticks. I need the pics to behave like in frames in HTML, including moving, resizing etc. Same for video clips that I want running within the cells.
What will show in column B will change each day as a I am creating a ordering picking list and want to show a pic in column A of the item to pick the item. Is there an easy way of doing this.
I have been messing around with the following
=showpic("C:DesktopItems46004978Thumb.jpg")
And thought I may be able to show this as by doing the following in the desired cells
And the index formula will grab the correct showpic string depending on stock code that is showing in various column B cells but this isn't working.....
Macro that would insert multiple pictures at once into one column with two rows per page (so that only two pictures are on each page) for word?
If so, would there also be a way to make it to were photos would have a caption box underneath each photo that list them as "Photo #1: Photo #2: Photo#3:" ect...
I know this is quite a task to achieve but I'm still relatively new to Macros and VBA and have a ton of pictures to integrate into Word for work.
I have inlcuded my workbook that I use for tracking the NFL season and I'd like to add in some team logos just to make it look a little cooler.
The attached workbook includes three sheets, the first of which uses a drop-down for selecting picks. The second sheet has the team logos and the third sheet feeds off the first.
I'd like for team logos to populate into the third sheet based on what is selected in the first sheet.
I've already tried a few methods, all unsuccessfully. I tried this [URL] which was a great idea but it didn't allow for the same image to be repeated potentially 100 times. I also tried a method involving named ranges and indirect lookups to the linked picture image but that would require a different named range for every person and every pick which isn't feasible.
if it's possible to just do a massive nested if statement with a vlookup to return an image but I haven't been successful in that either.
Is it possible to have an Image Box which opens different images based on the value of a cell. Say when A1 = 1, the picture of one thing comes up....when A1=2 and different picture and so on?
where i have a products list and respective pictures in a folder. What is should do is to get the relevant pictures appear on the screen when i select the relevant name.
I have an workbook with pictures that are linked to external picture files, and they are placed in the workbook via macro. When I email the file to another computer and open it, the pics do not display and show an error:
The linked image cannot be displayed. The file may have been moved, renamed, or deleted, Verify that the link points to the correct file and location.
I would like to be able to save the workbook with the pictures in them (without having to archive them) so that I can open it and see them on another machine.
I am attempting to create a template to make time and dollar budgets for various projects easier to create (20 plus projects a year with varying number of employees).
I want to have a template in which you input the number of employees working in a cell (IE. 3 employees), and with that the table expands to have enough rows to have 3 employees data input. However, only insert the number required but not overriding "totals" row below. With the new inserted rows I would like to keep the same format and formula for the row it was based on.
I'm working with a large report that includes ~6000 rows of data. Within the report the data is separated into a couple hundred town names - "Town of XXX" - and I need a page break at each town. Is there a way to insert a page break based on text in a cell? Should be an option in conditional formatting but... Need to avoid VBA.
On sheet "Create Package" in cell "AA14" I have a value (lets say 2).
I want it to go to sheet "Samples" and insert a number of rows equal to the value on sheet "Create Package" cell "AA14" (so 2 rows)
I have a header row in row 1, so I would like it to insert the designated number of rows beneath that.
Then I would like it to copy a designated number of rows (based off of the "AA14" value, so 2) from the "Create Package" sheet starting at row 66 and then paste special values into the new rows that were inserted on sheet "samples".
I am creating a proposal for a online sales store, i have in column A a list of item names that my buyer liked and wants to run, but i have to send them the pictures for the items which is located in a directory on my drive together with all other items. we have 4 category's of pictures 1 is the main image from this we only have 1 of each item, then we have the S category there we may have up to 3 images s1, s2 and s3 not more then 3 and the same is with the R category and with the M as well. We did created a VBA to copy all images from the list into a new directory with all sub pictures into a new sub dir. and bring back a list of all images not found. But i am having a problem when i run the code if it dosnt find the image looking for (for instanse EAR11-M1 the code stopes there looking for the file even the error checking in the code is set to resume what is wrong with code?
I have on Sheet1 a table with a list of values in column A, and their corresponding picture in column B. On Sheet2 I have used the define name option to set up an index,match against the original table so that the relevant picture shows whenever someone selects one of the values in column A.
The problem is, while the pictures will change when the values are changed, because all of the pictures are "named", they will continue to show if a value not in the lookup table is selected.
Is there a piece of code that would allow me to specify if cell=blank,hide picture if not show picture?
I have seen the attached code, however this either shows or hides ALL the pictures on the active sheet, while I want to show or hide the picture in the active cell only.
I need to start with a worksheet without any objects, namely pictures. Without knowing the name of the object, is there a way to clear all objects on a worksheet?
Second: on a different worksheet there are products with pictures with the product number. When a user selects the product number I want to copy that picture and copy it to J42 of the first sheet. My issue is positioning the picture.
I am working to make an automatic result card in which excel automatically gets data of every student which is present in sheet within the workbook by simply writing roll number of the student in a cell. and i have done it easily by Vlookup and index functions but the only problem i am facing is, that i want to show the picture of each student by roll no. pictures are in one folder on my hard drive, now i want that as the roll number of the student is written the result excel should display the picture (from the folder, each picture named by roll)of the student. for example i write 1234 in roll no cell and want to get and show the picture no 1234 in another cell. (from the folder)
I want to insert a line wherever I encounter a number. I have a range of cells in column "A" with invoices listed and at the end of each customer I have the total. At the total line (the number) I want to insert a line. Right now I can't figure out how get the cell value to recognize a number from a non-number data type (bolded area)
I have an amount of data split into various fields. I need to do something similar to the following:
In each row I have three fields separated by columns: name, sector and specialty. There is only one name and one sector for each record, but possibly several specialties (of which there are fifteen types in total, so they do not appear in a consistent column. specialty 'i' could appear in columns 3, 4, 5 through to 17. ie, sample entries below:
sheet 1 a1 name a2 sector a3 specialty i a4 specialty iv b2 name b2 sector b3 specialty ii b3 specialty iv b4 specialty x c3 name c4 sector c5 specialty i c6 specialty ii
The thing is, for every specialty in a row, I need new records created, so the above would become:
sheet 2 a1 name a2 sector a3 specialty i a1 name a2 sector a3 a4 specialty iv b2 name b2 sector b3 specialty ii b2 name b2 sector b3 specialty iv b2 name b2 sector b4 specialty x c3 name c4 sector c5 specialty i c3 name c4 sector c6 specialty ii
I have a large data set (excel file), of "Names", "Phone Numbers", and i need to sort this based on the States that correspond with the Phone numbers. The states currently do not exist in the spreadsheet, so my current problem is trying to insert those states into the spreadsheet.
There are over 100 area codes in the data set, so i'll likely have to write a large "If" statement in VB to run through them all, but that shouldnt be a problem.
NAME, PHONE, STATE Bleh, 555-555-5555, =ChkState(B2)
I've been playing around with the VB Stuff in Excel and this is what i've come up with for trying to insert the State field
Function ChkState(pVal As String) As Long
Dim AreaCode As String Dim StateAbrv As String
AreaCode = Left(pVal, 3)
If AreaCode = "201" Then StateAbrv = "Test201" ElseIf AreaCode = "203" Then StateAbrv = "Test203" ElseIf AreaCode = "555" Then StateAbrv = "Test555" Else StateAbrv = "0" End If MsgBox StateAbrv End Function
I'm fairly new to this VB stuff, my main problem stems from trying to insert the "StateAbrv" back into the Cell for the spreadsheet.
Each week I format a report that I receive that lists every product a particular employee closed. Its a list of each employee, the product and date. I'll have about 20-30 lines for each employee. I can easily sort by the employee name to have a nice list.
From here what I do is use a forumla to mark where each employee's name changes, then filter by that changed line and insert page breaks for each of these lines. Is there a way to macro this to save me time, having 270 employees takes alot of time still, because thats 270 manually inserted page breaks.
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
I have two images that have a name on each sheet for reference. One is a thumbs up image, one is a thumbs down. They are both named tu_image and td_image respectively. I want to show the thumbs up image if a particular cell has a value of 10 and show the thumbs down image if that cell's value is < 10.
This check and display needs to be done about 20 times on different sheets and with different values. (i.e. Thumbs down should only show when the value is < 20, instead of 10.) Ideally this should take place when the workbook updates with new data. Is this possible?
