I'm having some trouble fully understanding the Intersect Method. The help files use examples that check if a range Intersects another, if the do then display a message box; I think I understand that.
The usage I don't understand is like this
Set MyRange = Range("C:C", "D:D", "E:E")
Code here
Intersect(CopyRange, MyRange).copy
item = InputBox("Please Select Row Number of Child to be Removed")
myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
My app uses Worksheet_Change(ByVal, Target as Excel.Range). To narrow the scope of the event I then use either:
View 2 Replies View RelatedIm tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
When trying to intersect ot ranges in an application it selects all ranges example:
View 2 Replies View RelatedGot a series of data in a master sheet. I wondered is there a formula that will find an entry in column A, find another entry in row 1 and return the figure where the two meet.
View 2 Replies View RelatedI have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
View 2 Replies View RelatedI have a Worksheet Change event that when a cell (H5) is changed, it does a search for the value on another sheet. When it finds that value, I would like it to find the intersection of the column it found the value in and a named range.
Here is what I have so far. It works when I use the
Code:
.Range("H4") = c.Offset(15)
, but not the
Code:
.Range("S8") = isect.Offset(3)
.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
UpperCase Target
'Fills in 60 Point form when part number is changed
'Sheets("60 POINT").Unprotect
[Code] ........
The match results are posted on another sheet and the winner allocated the letter W and the loser allocated L (in the sample workbook attached these are on sheet2 cells B1 and B2 with the winners name in A1 and the losers in A2, i.e. Bill and Susan) I have the code for this working properly.
What I need to do next is transfer the W and L onto the grid in sheet1 and insert the W in the cell that is the intersection between the row with the winners name and the column with the losers name. Then insert the L in the cell that is the intersection between the row with the losers name and column with the winners name. I hope that makes sense!
If it is simpler to insert the W and L into the grid directly from the winner and loser names in sheet2 col A rather than allocating the W and L in col B first, then that is great.
I have 4 sheets (2006,2007,2008,2009) Each has appx. 365 named ranges of 65 rows each. Each row (col A) has text(7:00 am, 7:15, 730, 7:45...11:00 pm (thats 65 rows)) to make a very useful schedule. The top 8 rows of each sheet are frozen so that a control panel has a place to sit. From the control panel, you can click on the go to "TODAY" button and the schedule scrolls to that day and indicates it in a label on the panel. When I named each range, I put a water mark of the day in the back ground so the user always knows what day it is. I also named each range with its respective date and the label on the control panel is supposed to indicate the active range(for instance: the user scrolls down 12 days and clicks inside it).
MY PROBLEM: Code that returns the intersection of the active cell and the name of the range does not work with the way in which I named my ranges. It works on a more simple named range However.
Sub DefineNameandwatermark2007()
Dim i As Long
Dim a, b, c, X
Dim dt As Date
Dim sr As String
dt = DateSerial(2007, 1, 1)
For i = 8 To 25000 Step 66
j = j + 1
a = Application.WorksheetFunction.Text(dt + j, "ddd")
b = Application.WorksheetFunction.Text(dt + j, "mmm")
c = Application.WorksheetFunction.Text(dt + j, "d")
X = a & "_" & b & "_" & c
ActiveWorkbook.Names.Add Name:=X, RefersToR1C1:="=2007!R" & i & "C1:R" & _
i + 65 & "C1"....................................
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
If I have a graph with 2 series of data plotted, how can I display the x-axis' value when these 2 curves intersect each other?
View 9 Replies View RelatedI am trying to clear the contents in a rows reference by a variable (rownum) using the
View 2 Replies View RelatedI have two ranges(range1 and range2) and i would like to create a third range(range3 that i have defined already) based on the values that dont intersect between range1 and range2. Below is what i have so far.
Sub runthrough()
Dim rng As Range
Range("range3").Clear
[Code]....
This is my
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then
If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then
Exit Sub
Else
Do Something......
End If
End If
End If
End Sub
when excution comes to this line
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
I am creating an automatic, mobile logging system utilizing a GPS. The US Census Bureau provides approximate coordinates for each US zipcode. An example of "45252", which is my home zipcode is below...
-84.629861342656539.2773019382716
-84.630347000000039.3120560000000
-84.629424000000039.3104500000000
-84.633324000000039.3090500000000
-84.634224000000039.3091500000000
-84.637248000000039.3062570000000
-84.627748000000039.3043570000000
-84.621147000000039.3024570000000
-84.618347000000039.3001570000000
-84.611047000000039.2924570000000
These sets of Longitute and Latitude coords define a boundary for my zip code. What I need to do is create a complex polygon with the above coords and then, feeding a function a Longitute and Latitude, determine if that given global position falls within my polygon (zip code boundary).
For example:
Longitude: -84.6197
Latitude: 39.2947
Will fall within the above polygon and my function would return true.
In my "cover" sheet I click the allocate cover button and it then generates a list of data below the first table. This generated data now needs to update the "timetable" sheet by using the "allocated cover teacher" and "period" cells as a reference to then input the class code into the timetable at this time.
cover.jpg
So in this picture we see that Dorothy*Schultz (in cell E27) has been given a class 3 MABA RM 15(cell D27) on TuesdayP1 (C27). I want search for Dorothy*Schultz and TuesdayP1 in the "timetable" tab to input the name of the class which in this instance would be input to cell I20 in the "timetable tab".
VBA COVER Forum Version 1.xls
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
with opening a workbook at a specific time and/or running a macro at a specific time.
View 12 Replies View RelatedI realy don't understand the FileExists method at all. My VBA Editor doesn't seem to recognise the keyword FileExists ?
Allot of examples will write FileExists(Dir(sFilePath)) in their explanation but I don't know what the Dir is referring to. Does this mean the directions to the file or is this referring to the directory and Dir is actually a keyword for direcory?
I don't think I've found a single simple example which explains this properly?
I have some code which renames files. The key line being
View 2 Replies View RelatedIs there a way to use the find method on 1 row only?
View 2 Replies View RelatedI am trying to copy some code from the Excel help directory but I am getting an error saying "Compile Error, Can't find project or library".
What am I missing here?
fileSaveName = Application.GetSaveAsFilename( _
fileFilter:="Excel Files (*.xls), *.xls")
If fileSaveName <> False Then
MsgBox "Save as " & fileSaveName
End If
What's the easiest way to return the address of a cell without the dollar signs?
Example:
msgbox activecell.Address
' Returns $D$8
I'd like to see the address written as "D8" because I will be autofilling later.
I am trying to invoke an excel VBA macro from excel from a button or in some
way directly by the user (that is by not having to invoke macro from excel menu)
that can be invoked from a Macintosh or PC version of excel. That is, it should
not used active X controls but in some other way that is best practice. Is there
any way to invoke a macro by button or menu item that is cross-platform?
I havent work with excel for years and now I have to do this as soon as possible:
There is a Donto's formula for calculating votes.
I have a conditional formatting or some other method (open to suggestions) which will identify those line items which need his attention.
I'm attaching a spreadsheet. Note that my items which I'd like flagged are not necessarily one right after the other in the column - i.e. there will be some which are skipped and not needed to be 'rated'.
I have a range object representing a data set, and I want to return only the first row of data from the range. The range starts at cell A2:
21 22 23 24 25
31 32 33 34 35
41 42 43 44 45
I.e. the value 21 is the data in cell A2 (row 2, column 1) and so forth.
'Given that WS1 is a worksheet object representing Sheet 1
'Given that WS2 is a worksheet object representing Sheet 2
I am running a vba code to add about 200 sheets...my code generates a sheet in one file and then pastes it in another file....after generating nad adding 38 sheets i get the error copy method of excel failed
i tried clearing the clipboard and resuming the code but that didn,t work