I have 4 sheets (2006,2007,2008,2009) Each has appx. 365 named ranges of 65 rows each. Each row (col A) has text(7:00 am, 7:15, 730, 7:45...11:00 pm (thats 65 rows)) to make a very useful schedule. The top 8 rows of each sheet are frozen so that a control panel has a place to sit. From the control panel, you can click on the go to "TODAY" button and the schedule scrolls to that day and indicates it in a label on the panel. When I named each range, I put a water mark of the day in the back ground so the user always knows what day it is. I also named each range with its respective date and the label on the control panel is supposed to indicate the active range(for instance: the user scrolls down 12 days and clicks inside it).
MY PROBLEM: Code that returns the intersection of the active cell and the name of the range does not work with the way in which I named my ranges. It works on a more simple named range However.
Sub DefineNameandwatermark2007()
Dim i As Long
Dim a, b, c, X
Dim dt As Date
Dim sr As String
dt = DateSerial(2007, 1, 1)
For i = 8 To 25000 Step 66
j = j + 1
a = Application.WorksheetFunction.Text(dt + j, "ddd")
b = Application.WorksheetFunction.Text(dt + j, "mmm")
c = Application.WorksheetFunction.Text(dt + j, "d")
X = a & "_" & b & "_" & c
ActiveWorkbook.Names.Add Name:=X, RefersToR1C1:="=2007!R" & i & "C1:R" & _
i + 65 & "C1"....................................
I have two ranges(range1 and range2) and i would like to create a third range(range3 that i have defined already) based on the values that dont intersect between range1 and range2. Below is what i have so far.
Sub runthrough() Dim rng As Range Range("range3").Clear
I would like to use VBA to name ranges. I need to name the Desc., Price, and ID# columns separately and want to use the Location and the headings of each column as the name range. Example - the column containing Duplex Outlet would be named ElectricDesc.
This is what I came up with, but need to figure out how to make "add name" a formula combining Location+Desc. I tried concatenate (B1,A2) but it did not work.
I have a range of cells that I have named to be used in a data validation for a drop down box. I have named the cells and would like to have the user name the cells by typing in the name into one cell.
For example
Cells F10:F14 are named "orange" right now (typed in cell F9) I would like the user to be able to change the name of the cells to whatever they want by changing the cell in F9 - i.e. "banana" and the range is automatically named banana so the data validation can search for Banana instead.
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
I'm having some trouble fully understanding the Intersect Method. The help files use examples that check if a range Intersects another, if the do then display a message box; I think I understand that.
Got a series of data in a master sheet. I wondered is there a formula that will find an entry in column A, find another entry in row 1 and return the figure where the two meet.
I have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
I have a Worksheet Change event that when a cell (H5) is changed, it does a search for the value on another sheet. When it finds that value, I would like it to find the intersection of the column it found the value in and a named range.
Here is what I have so far. It works when I use the
Code: .Range("H4") = c.Offset(15) , but not the Code: .Range("S8") = isect.Offset(3) .
Code: Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next UpperCase Target
'Fills in 60 Point form when part number is changed 'Sheets("60 POINT").Unprotect
The match results are posted on another sheet and the winner allocated the letter W and the loser allocated L (in the sample workbook attached these are on sheet2 cells B1 and B2 with the winners name in A1 and the losers in A2, i.e. Bill and Susan) I have the code for this working properly.
What I need to do next is transfer the W and L onto the grid in sheet1 and insert the W in the cell that is the intersection between the row with the winners name and the column with the losers name. Then insert the L in the cell that is the intersection between the row with the losers name and column with the winners name. I hope that makes sense!
If it is simpler to insert the W and L into the grid directly from the winner and loser names in sheet2 col A rather than allocating the W and L in col B first, then that is great.
This is my Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then Exit Sub Else
Do Something...... End If End If End If End Sub
when excution comes to this line If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
item = InputBox("Please Select Row Number of Child to be Removed") myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
I am creating an automatic, mobile logging system utilizing a GPS. The US Census Bureau provides approximate coordinates for each US zipcode. An example of "45252", which is my home zipcode is below...
These sets of Longitute and Latitude coords define a boundary for my zip code. What I need to do is create a complex polygon with the above coords and then, feeding a function a Longitute and Latitude, determine if that given global position falls within my polygon (zip code boundary).
For example:
Longitude: -84.6197 Latitude: 39.2947
Will fall within the above polygon and my function would return true.
In my "cover" sheet I click the allocate cover button and it then generates a list of data below the first table. This generated data now needs to update the "timetable" sheet by using the "allocated cover teacher" and "period" cells as a reference to then input the class code into the timetable at this time.
cover.jpg
So in this picture we see that Dorothy*Schultz (in cell E27) has been given a class 3 MABA RM 15(cell D27) on TuesdayP1 (C27). I want search for Dorothy*Schultz and TuesdayP1 in the "timetable" tab to input the name of the class which in this instance would be input to cell I20 in the "timetable tab".
I am currently using an Intersect statement in a worksheet module to perform two things: 1. Insert a time stamp into row 2 when row 1 has a price inserted 2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user. If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
on sheet 1 which is named front cover i want to type in cell C8 a number or a name and it will change sheet 2 tab to what i type i have 20 sheets to do i can get it working in b5 on same sheet but i need it to work from the front cover sheet
My workbook has a summary page and one page for every day of the month. I am making a template file, so I can duplicate it to use every month of the year.
Each week is separated by a worksheet titled "week 1", "week 2" , etc. This is used in the summary page so I can gather totals for a week.
What I want to be able to do is this:
On the first day of the new month, go to week one and type in the date. Then that sheet tab would equal the date, and each daily tab name thereafter would increment the appropriate amount (1day). Then on week 2, it would be equal to the tab value for Friday +3.
The problems I see are:
1. In week 1 the month can start on any on of the 5 worksheets I have set up to cover the week. So any first day coding I need may have to be repeated in the first 5 worksheets
Is this do-able? 2. Tab naming code I have found on this site is not working for dates. 9-15-08 typed into a1 will not translate into the tab, even tho it is a valid name. I am using code VoGII gave which follows: ...
We utilize a shared spreadsheet in our department named "Arrangement Requests". From time to time and seemingly very random the sheet renames itself. When this happens anyone adding information to it becomes unable to save since the original "no longer exists".
This causes problems because everything we do is in real time and expected to be viewed by all as soon as save has been indicated.
make the auto naming code displayed on the worksheet tab die after first entry into, so that regardless whether any values are changed in the worksheet--a minute, hour, day after-- the "namedate" stays the same.
