Intersect Of Rows And Columns
Dec 19, 2013Got a series of data in a master sheet. I wondered is there a formula that will find an entry in column A, find another entry in row 1 and return the figure where the two meet.
View 2 RepliesGot a series of data in a master sheet. I wondered is there a formula that will find an entry in column A, find another entry in row 1 and return the figure where the two meet.
View 2 RepliesI am trying to clear the contents in a rows reference by a variable (rownum) using the
View 2 Replies View RelatedMy app uses Worksheet_Change(ByVal, Target as Excel.Range). To narrow the scope of the event I then use either:
View 2 Replies View RelatedIm tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
I'm having some trouble fully understanding the Intersect Method. The help files use examples that check if a range Intersects another, if the do then display a message box; I think I understand that.
The usage I don't understand is like this
Set MyRange = Range("C:C", "D:D", "E:E")
Code here
Intersect(CopyRange, MyRange).copy
When trying to intersect ot ranges in an application it selects all ranges example:
View 2 Replies View RelatedI have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
View 2 Replies View RelatedI have a Worksheet Change event that when a cell (H5) is changed, it does a search for the value on another sheet. When it finds that value, I would like it to find the intersection of the column it found the value in and a named range.
Here is what I have so far. It works when I use the
Code:
.Range("H4") = c.Offset(15)
, but not the
Code:
.Range("S8") = isect.Offset(3)
.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
UpperCase Target
'Fills in 60 Point form when part number is changed
'Sheets("60 POINT").Unprotect
[Code] ........
The match results are posted on another sheet and the winner allocated the letter W and the loser allocated L (in the sample workbook attached these are on sheet2 cells B1 and B2 with the winners name in A1 and the losers in A2, i.e. Bill and Susan) I have the code for this working properly.
What I need to do next is transfer the W and L onto the grid in sheet1 and insert the W in the cell that is the intersection between the row with the winners name and the column with the losers name. Then insert the L in the cell that is the intersection between the row with the losers name and column with the winners name. I hope that makes sense!
If it is simpler to insert the W and L into the grid directly from the winner and loser names in sheet2 col A rather than allocating the W and L in col B first, then that is great.
I have 4 sheets (2006,2007,2008,2009) Each has appx. 365 named ranges of 65 rows each. Each row (col A) has text(7:00 am, 7:15, 730, 7:45...11:00 pm (thats 65 rows)) to make a very useful schedule. The top 8 rows of each sheet are frozen so that a control panel has a place to sit. From the control panel, you can click on the go to "TODAY" button and the schedule scrolls to that day and indicates it in a label on the panel. When I named each range, I put a water mark of the day in the back ground so the user always knows what day it is. I also named each range with its respective date and the label on the control panel is supposed to indicate the active range(for instance: the user scrolls down 12 days and clicks inside it).
MY PROBLEM: Code that returns the intersection of the active cell and the name of the range does not work with the way in which I named my ranges. It works on a more simple named range However.
Sub DefineNameandwatermark2007()
Dim i As Long
Dim a, b, c, X
Dim dt As Date
Dim sr As String
dt = DateSerial(2007, 1, 1)
For i = 8 To 25000 Step 66
j = j + 1
a = Application.WorksheetFunction.Text(dt + j, "ddd")
b = Application.WorksheetFunction.Text(dt + j, "mmm")
c = Application.WorksheetFunction.Text(dt + j, "d")
X = a & "_" & b & "_" & c
ActiveWorkbook.Names.Add Name:=X, RefersToR1C1:="=2007!R" & i & "C1:R" & _
i + 65 & "C1"....................................
If I have a graph with 2 series of data plotted, how can I display the x-axis' value when these 2 curves intersect each other?
View 9 Replies View RelatedI have two ranges(range1 and range2) and i would like to create a third range(range3 that i have defined already) based on the values that dont intersect between range1 and range2. Below is what i have so far.
Sub runthrough()
Dim rng As Range
Range("range3").Clear
[Code]....
This is my
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then
If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then
Exit Sub
Else
Do Something......
End If
End If
End If
End Sub
when excution comes to this line
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
item = InputBox("Please Select Row Number of Child to be Removed")
myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
I am creating an automatic, mobile logging system utilizing a GPS. The US Census Bureau provides approximate coordinates for each US zipcode. An example of "45252", which is my home zipcode is below...
-84.629861342656539.2773019382716
-84.630347000000039.3120560000000
-84.629424000000039.3104500000000
-84.633324000000039.3090500000000
-84.634224000000039.3091500000000
-84.637248000000039.3062570000000
-84.627748000000039.3043570000000
-84.621147000000039.3024570000000
-84.618347000000039.3001570000000
-84.611047000000039.2924570000000
These sets of Longitute and Latitude coords define a boundary for my zip code. What I need to do is create a complex polygon with the above coords and then, feeding a function a Longitute and Latitude, determine if that given global position falls within my polygon (zip code boundary).
For example:
Longitude: -84.6197
Latitude: 39.2947
Will fall within the above polygon and my function would return true.
In my "cover" sheet I click the allocate cover button and it then generates a list of data below the first table. This generated data now needs to update the "timetable" sheet by using the "allocated cover teacher" and "period" cells as a reference to then input the class code into the timetable at this time.
cover.jpg
So in this picture we see that Dorothy*Schultz (in cell E27) has been given a class 3 MABA RM 15(cell D27) on TuesdayP1 (C27). I want search for Dorothy*Schultz and TuesdayP1 in the "timetable" tab to input the name of the class which in this instance would be input to cell I20 in the "timetable tab".
VBA COVER Forum Version 1.xls
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
View 14 Replies View Relatedremoving duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).
In other words, my individual data files look something like this:
Participant 1 (title of data file)
Trial/var1/var2/var3
1 55 43 65
2 54 43 56
3 33 23 56
and I want to compile all the data into a single file that looks like this:
Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ...
1 55 43 65 54 43
2 . . .
I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
How to align two columns that sometimes have rows that are unequal in number. The data is sourced from a web page that has a table layout and the table lays out the one to many values this way in the table. My data looks like this:
Table ...Term
t1 ..... term1
t2 ......term2
..........term2.a
..........term2.b
..........term2.c
t3 ......term3
..........term3.b
The editor removes leading spaces. In the column Table there are only three rows but in column Term there are multiple rows per single row from column Table. So one row t2 for column Table has three rows in column Term. Are these cells merged and can I in a mcro detect if the cells are merged? How is the addressing of the merged cells in a VBA macro?
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
have a large dataset where I want to move some data from rows into columns and other data from columns into rows. I have enclosed an example. It is indeed only an example as the original has many more rows and colunms. What I want to do is to move the the years (columns) into rows and move Product (row) into columns. The example shows how it currently looks and how I want it to look.
View 2 Replies View RelatedI have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedI wrote a short VBA to change known data from rows to column and columns to row.
Data is like this:
Hello Hello Hello
Hello Hello Hello
I can chang it to Hello .... Hello
or
Hello..
.
.
.Hello
I need to figure out a way to do this when data is not fixed - ie:
Hello Hello Hello Hello Hello
Hello Hello Hello
Hello Hello Hello
Hello
or
Hello Hello Hello Hello Hello Hello
Hello Hello Hello
Hello Hello Hello
Can you offer suggestions on what commands I can use to find the begining and ending of data, so that no matter what format it is in I can change it to one row or one column?
I have 20,000 columns of data that I need turned into 4 rows.
I know about copying and paste special (transpose), however, the data is in groups of 4 columns
Example:
1. Name
2. Street
3. City, State
4. Number
5. Name
6. Street
7. City, State
8. Number
and I need it to look like
Name Street City, State Number
So is there anyway that I can make it turn columns into rows by groups of 4?
I have huge data like below.
Parent Site:A
Child Site:A
Child Site:B
Child Site:C
Parent Site:B
Child Site:A
Child Site:B
Child Site:C
Child Site:D
Parent Site:z1
Parent Site:1
I am looking for a macro which can convert above data to columns as per below.
******** ******************** ************************************************************************>Microsoft Excel - r2c.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1Parent SiteChild SiteChild SiteChild SiteChild SiteChild Site2AABC 3BABCD 4Z1 5112510156XA1Z33 720A Sheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
In Column 'A' I have part numbers. In Column B I have suppliers that supply that part number. My report drops into excel as per the below table. My issue is if a part number can be supplied by more than one supplier it duplicates the part number in Column 'A' based on how many suppliers can supply that part number In Column 'B' it will list each supplier for that part number In the table below you can see that part number 1122 can be supplied by supplier 'ABC' and also 'DEF' - Part number 9966 can be supplied by 3 different suppliers so lists the part number 3 times in Column 'A' and in column 'B' it lists each supplier i.e. 'TUV', 'WX' and 'YZ'
What I want to be able to do is the suppliers in Column 'B' be listed in the cells to the right of the part number and dupliactions in Column 'A' be removed
'A' 'B'1122
ABC
1122
DEF
9966
TUV
9966
WX
9966
YZ