I have a Worksheet Change event that when a cell (H5) is changed, it does a search for the value on another sheet. When it finds that value, I would like it to find the intersection of the column it found the value in and a named range.
Here is what I have so far. It works when I use the
Code:
.Range("H4") = c.Offset(15)
, but not the
Code:
.Range("S8") = isect.Offset(3)
.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
UpperCase Target
'Fills in 60 Point form when part number is changed
'Sheets("60 POINT").Unprotect
I have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
The match results are posted on another sheet and the winner allocated the letter W and the loser allocated L (in the sample workbook attached these are on sheet2 cells B1 and B2 with the winners name in A1 and the losers in A2, i.e. Bill and Susan) I have the code for this working properly.
What I need to do next is transfer the W and L onto the grid in sheet1 and insert the W in the cell that is the intersection between the row with the winners name and the column with the losers name. Then insert the L in the cell that is the intersection between the row with the losers name and column with the winners name. I hope that makes sense!
If it is simpler to insert the W and L into the grid directly from the winner and loser names in sheet2 col A rather than allocating the W and L in col B first, then that is great.
I have two ranges(range1 and range2) and i would like to create a third range(range3 that i have defined already) based on the values that dont intersect between range1 and range2. Below is what i have so far.
Sub runthrough() Dim rng As Range Range("range3").Clear
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
In my "cover" sheet I click the allocate cover button and it then generates a list of data below the first table. This generated data now needs to update the "timetable" sheet by using the "allocated cover teacher" and "period" cells as a reference to then input the class code into the timetable at this time.
cover.jpg
So in this picture we see that Dorothy*Schultz (in cell E27) has been given a class 3 MABA RM 15(cell D27) on TuesdayP1 (C27). I want search for Dorothy*Schultz and TuesdayP1 in the "timetable" tab to input the name of the class which in this instance would be input to cell I20 in the "timetable tab".
how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range? For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names: Apple Orange Banana Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
I'm using dynamic named ranges a lot recently. One thing that bothers me is that I have to do so many for one range.
For example I have a named range from A1:G30. Now I can use this named_range to do vlookup etc. but when I for example want to use the match with the index function I have to define a new range because for the match function to use it need only one column or row. Is there some hidden command I could use like named_range_row1 ? This would make it so much easier to read the code and I dont have to construct so many named_ranges.
I would like to create a named range in VBA for column A, which is a sum of B and C. The problem is that A can have 0 as a value. What I would really like to do is define the named range in column A as A2 to the last column with a value in column B(B10) which would make the named range in column a A2:A10.
I am attempting to obtain the last non-empty row in a column of a spreadsheet by using the following formula
=SUMPRODUCT(MAX((A:A<>"")*(ROW(A:A))))
This works fine.
However, I'd like to make it more dynamic and be able to obtain a usable column reference (i.e., the A:A portion of the formula) from a named range (single cell).
I would like to name a range based on a row number and a column number. I have found the row and column number using this code, but I can't seem to get the rest right.
Sub LastRowCol() Dim intLastRow As Integer Dim intLastCol As Integer Dim ws As Worksheet
Can you use Row & Column numbers in a Formula the way you can in VBA?
I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)
Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C (it would = 470)
Also I have an existing Named Range HeaderRowNum (it = 16)
Currently I have a LOT of formulas like: =SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))
problem is any new data must be added between Rows 17 & 470
So I would like to create dynamic new forumlas to read like: SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............
I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I have two sheets. Sheet A has a list of folders. This list is updates dynamically every time the sheet is opened. I have another sheet (sheet B) which has a list of all the files in the sub-folders, listed with the folder name at the top of the column and the files within in the column underneath with hyperlinks to them. The goal is to be able to navigate to the folders on sheet A and to click there to go to the column where all the files in that folder are linked to. What I need is a macro that will search a column and for every cell that has text in it and create in the column directly to the right a hyperlink to the appropriate cell in the top row in sheet B that has the same name as the text in the cell on sheet A that it finds. I already have the macros for listing the folders on sheet A and the macro for listing all the files in the sub folders in sheet B and they work fine. The goal is a link list which is dynamic and that recreates itself no matter what I add to the folders.
For instance, let’s say there is a folder timesheets. If I add a sub-folder called accounting to the folder Sheet A scans then timesheets would be bumped down one spot on the list, so the macro has to look dynamically for the text in the column on sheet A.
Also the addition of the new folder would move the order of the columns on sheet B, since both lists are alphabetical. So the link generation macro would need to search row 1 of Sheet B to find the match for the text in the cell to the left of where the link would be generated and create a link to the top of that column. I’ve looked all through the site and not found something that I can even modify to do what I need.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB: Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then [valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData() Dim counter As Integer counter = Sheets("Imported Data").Range("Counter")
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
I'm having some trouble fully understanding the Intersect Method. The help files use examples that check if a range Intersects another, if the do then display a message box; I think I understand that.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Got a series of data in a master sheet. I wondered is there a formula that will find an entry in column A, find another entry in row 1 and return the figure where the two meet.
