The match results are posted on another sheet and the winner allocated the letter W and the loser allocated L (in the sample workbook attached these are on sheet2 cells B1 and B2 with the winners name in A1 and the losers in A2, i.e. Bill and Susan) I have the code for this working properly.
What I need to do next is transfer the W and L onto the grid in sheet1 and insert the W in the cell that is the intersection between the row with the winners name and the column with the losers name. Then insert the L in the cell that is the intersection between the row with the losers name and column with the winners name. I hope that makes sense!
If it is simpler to insert the W and L into the grid directly from the winner and loser names in sheet2 col A rather than allocating the W and L in col B first, then that is great.
I have a Worksheet Change event that when a cell (H5) is changed, it does a search for the value on another sheet. When it finds that value, I would like it to find the intersection of the column it found the value in and a named range.
Here is what I have so far. It works when I use the
Code: .Range("H4") = c.Offset(15) , but not the Code: .Range("S8") = isect.Offset(3) .
Code: Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next UpperCase Target
'Fills in 60 Point form when part number is changed 'Sheets("60 POINT").Unprotect
In my "cover" sheet I click the allocate cover button and it then generates a list of data below the first table. This generated data now needs to update the "timetable" sheet by using the "allocated cover teacher" and "period" cells as a reference to then input the class code into the timetable at this time.
cover.jpg
So in this picture we see that Dorothy*Schultz (in cell E27) has been given a class 3 MABA RM 15(cell D27) on TuesdayP1 (C27). I want search for Dorothy*Schultz and TuesdayP1 in the "timetable" tab to input the name of the class which in this instance would be input to cell I20 in the "timetable tab".
I have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance 2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
I am trying to write some VBA code to select a range in a column going down to the last item in the column.
So I want to write a macro that will copy cells B4 - B17 into cells A4 - A17 but am having trouble with the code that will select B4 - B17. When I use the usual code which is as follows:
ActiveSheet.Range("b4", ActiveSheet.Range("b1").End(xlDown)).Select it selects down to A75, and I know why this is but not how to fix it.
This is raw data extracted from a third-party system. It has an option to export to Excel, but where it appears to have blank cells Excel actually believes there is data in there.
So is a way to identify what data Excel thinks is in there and perhaps use this to be able to select the range I want?
Different extractions will need a different range moved over - however it will always start at B4 and go down to B-whatever.
I am trying to write a macro, where I want to pick up alternative cells in each column from Sheet 1 and then Paste in Sheet 2. Each column starts with end of every year ( 31st Dec 1996 and so on. My data in sheet for each average column (for different years) is like this.
Average Closing Price 26.47
Stock Return -0.68
I want the value for stock return to be pick up different columns ( for each year) then paste in sheet 2.
In the attached file, details sheet contains multiple instances of project with associated costs for each of 2006, 2007 and 2008. What I need is a formula (preferably) or a VBA that select distinct project names and populate column B of summary sheet so I can do a sum if. The problem is the project names changes dynamically every week and they are practically in hundreds.
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
I'm having some trouble fully understanding the Intersect Method. The help files use examples that check if a range Intersects another, if the do then display a message box; I think I understand that.
Got a series of data in a master sheet. I wondered is there a formula that will find an entry in column A, find another entry in row 1 and return the figure where the two meet.
I have 4 sheets (2006,2007,2008,2009) Each has appx. 365 named ranges of 65 rows each. Each row (col A) has text(7:00 am, 7:15, 730, 7:45...11:00 pm (thats 65 rows)) to make a very useful schedule. The top 8 rows of each sheet are frozen so that a control panel has a place to sit. From the control panel, you can click on the go to "TODAY" button and the schedule scrolls to that day and indicates it in a label on the panel. When I named each range, I put a water mark of the day in the back ground so the user always knows what day it is. I also named each range with its respective date and the label on the control panel is supposed to indicate the active range(for instance: the user scrolls down 12 days and clicks inside it). MY PROBLEM: Code that returns the intersection of the active cell and the name of the range does not work with the way in which I named my ranges. It works on a more simple named range However.
Sub DefineNameandwatermark2007() Dim i As Long Dim a, b, c, X Dim dt As Date Dim sr As String dt = DateSerial(2007, 1, 1) For i = 8 To 25000 Step 66 j = j + 1 a = Application.WorksheetFunction.Text(dt + j, "ddd") b = Application.WorksheetFunction.Text(dt + j, "mmm") c = Application.WorksheetFunction.Text(dt + j, "d") X = a & "_" & b & "_" & c ActiveWorkbook.Names.Add Name:=X, RefersToR1C1:="=2007!R" & i & "C1:R" & _ i + 65 & "C1"....................................
I have two ranges(range1 and range2) and i would like to create a third range(range3 that i have defined already) based on the values that dont intersect between range1 and range2. Below is what i have so far.
Sub runthrough() Dim rng As Range Range("range3").Clear
This is my Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then Exit Sub Else
Do Something...... End If End If End If End Sub
when excution comes to this line If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
item = InputBox("Please Select Row Number of Child to be Removed") myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
I need to select the whole column ABOVE the active cell. Ctrl-Shift-UpArrow is no good because it stops at the first blank cell. And selecting the whole column is no good either because when I subsequently paste into the column, it pastes in all the empty cells of the column, meaning my worksheets expands from a few hundred rows to 1 million!
Shift-Home does what I want on rows. Is there an equivalent for columns?
I wrote a Macro that select info from Worbook "A" to Workbook "B". In that Macro tha columns B:B, E:E and F:F are selected.
The problem is that the layout is not always the same so the correct columns keep shifting positions. The only thing that never changes is the "Column Label" in the first Row.
So, no matter from which column I alway have to copy: "Order Date"; "Status" and "MetofPay".
Is there anyway to tell my macro to look for those columns instead of B:B, E:E and F:F?
I am creating an automatic, mobile logging system utilizing a GPS. The US Census Bureau provides approximate coordinates for each US zipcode. An example of "45252", which is my home zipcode is below...
These sets of Longitute and Latitude coords define a boundary for my zip code. What I need to do is create a complex polygon with the above coords and then, feeding a function a Longitute and Latitude, determine if that given global position falls within my polygon (zip code boundary).
For example:
Longitude: -84.6197 Latitude: 39.2947
Will fall within the above polygon and my function would return true.
augmenting current code to select the column after a column. Current code is:
Code: If Sheets(data_sheet1).Cells(2, iCol).Value = "Stations" Then TargetCol = 1 If Sheets(data_sheet1).Cells(2, iCol).Value = "Agency" Then TargetCol = 2 If Sheets(data_sheet1).Cells(2, iCol).Value = "Advertisers" Then TargetCol = 3 If Sheets(data_sheet1).Cells(2, iCol).Value = "Product Code" Then TargetCol = 4 The next line should find the column after "Product Code".
I have a table of numbers to which a new number is added every day. I want to reference the last value in a separate cell. For example, in cell A1 I want to insert a formula that will look at Column B and select the last value. The values in Column B wil be added to each day, ie a new row will be inserted.
I am creating a spreadsheet to manage Block ID conflicts when adding mods to a Minecraft Server. Example spreadsheet is attached.
Description: Column A contains a list of available numbers (e.g. 1-20 and 31-50). Column B contains a list of numbers a new mod tries to use up by default (i.e. 1-25). A number in Column B that is not in Column A must be changed to the nearest number that is in Column A. In this example, numbers 21-25 in B are not available in A and must be changed to 31-35, respectively. Column C should be the result of changing Column B (i.e. 1-20 and 31-35).
Issue: The main problem is that as a given cell in Column B changes, that number needs to become unavailable in Column A for the next change. For example, when 21 in B returns 31, 31 can no longer be used for the next number in B (22).
I have been able to use VLOOKUP or INDEX/MATCH functions to lookup the numbers to be changed.
