I have numbers in a cell such as 1/25, 4/31, 12/35 etc I have the current formula to extract the left or right number but when there is only a single digit it also includes the / is there a way of eliminating this.
The numbers vary from 1 to 2 digits.
My current formula is =IF(C15<18,LEFT(E8,2))+IF(C15>18,RIGHT(E8,2))
I only want it to show the number not the forward slash
reading a zero number in a cell
here an example :
on Cell A1 = 01
on Cell B2 = 10
so I write at C1 the formula is =left(A1,1) but how come the number that comes out is 1 not 0 (zero) ?
but if I write at D1 the formula is = right(A1,1) the number comes out is 0 (zero)
how to make the formula that can read the zero in Cell C1?
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I have a conditional format which uses this format MAX($N$84:$N$94) to colour the cell containing the number but I now wish to amend this formula so that if an identical number also appears further down in the column only the first of the cells containing the identical number(s) will be coloured but none of the others,
View 4 Replies View Relatedas an example i will use the national lottery. numbers 1 to 49 inclusive. i need a formula that will list all the possibile 6 number combinations not repeating any.
View 6 Replies View RelatedI need a formula, that will, Show the Characters Left of Delimiter (,).
for example:
CABLE, UD SECONDARY #4 DPLX AL
result:
CABLE
I have a very large workbook with multiple sheets and use macros to copy and paste all data as values, then delete some rows and columns depending on certain criteria. This starts at cell A1 and works right, then down.
This is then saved as a copy and distributed to a wide audience.
The problem is that when each page is opened up, the data shown is the bottom right of the whole sheet instead of the top left ( Panes are frozen for row and column headers).
I have two tables: the 1st table consists of date range (From and To) and week number while the other table has only dates.
Example:
1st Table
FROM TO WK
3/27/2009 4/2/200914
4/3/2009 4/9/200915
4/10/2009 4/16/200916
4/17/2009 4/23/200917
4/24/2009 4/30/200918
2nd Table
DATE
03/28/2009
04/11/2009
04/26/2009
Need simple formula that would show a wk number in the 2nd table (2nd column)? I.e 03/28/2009 has wk no. 14, etc.
I need to show the size of a project in a cell based on it's number of hours, e.g.
Between 5-80 hours = SMALL
Between 80-200 hours = MEDIUM
Over 200 hours = LARGE
How can I do this? I can't get the IF function to work like this (unless I'm doing something wrong) and I thought about using a pivot table but think there must be an easy formula to use?
I am trying to make a column show the result of a formula as positive number only. Right now the column subtracts two other cells and displays the result. I am trying to make it show all the results, positive or negative as positive.
View 3 Replies View RelatedI have three search boxes in XL , two are search from and to dates and the other is search be ref.
I can currently search by dates and ref but would like to show all records in the specified dates if the ref field is left blank.
I am using the query writer and referencing back to cells in XL. I don't use the wizard or SQL. I have tried many options and think I should be using a OR statement with a wildcard but can't seem to get the result, does the wildcard just show the blank cells in the actual data?
How to show progress bar for both percentage completion and time left.
The code below is already created with percentage completion. Just to add time left.
[Code] ........
Is there a way to show the Vertical axis on both right and left side of the graph or at least on the Right hand side?
View 5 Replies View RelatedItems in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)
I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.
Cell
A1 Number >2000300040005000600070008000900010000
70 2864295717148571000114312861429
84 24236148059971883795610751194
[Code].....
I am wanting to get a function that can get the number from a fractions left side only . 13/14 2/1 1/5 etc
Col A varies in lenght so using a right function doesnt always work .
The result i need is in col B .
Sheet1 Â AB1DataResult2Fred Swchensoncenson [R63] 57 (13) 13/14 $39.40133Bob Bill [R54] 65 (7) 2/1 $3.3024Patrick Patrick [R56] 65->63.5 (10) 1/5 $12.6015Le Le [R56] 65 (2) 6/6 $3.4066John Ringopeterpaulandmaryslambgoingupahill [R58] 65 (2) 1/1 $2.8017Gold Silverbronzmetalmedals [R61] 58.5 (5) 16/15 $33.90168Mr Mycardontrun [R59] 68 (4) 1/1 $6.701
I have a spreadsheet with 3 columns. The first column has a list of numbers, the second column has a list of numbers, and the third column has a code, one of which is “IP”
I want to look up IP, when I find it I need to get the number in the column to it’s left, on the same row. Then I need to look up that number in the first column (which will be on a separate row). I then need to change the word in the third column of that row to “Kit”.
Col. A has numbers
Col. B has numbers, some of which are the same as in Col. A, but not in the same row
Col. C has a code, one of which is ‘IP’
I want to look for ‘IP’ in column C. When I find it, I want to get the number corresponding number from Col. B (same row), then look up that number in Col. A. (remember, Col. A and Col. B have some of the same numbers, they are just not in the same row).
When I find that number in Col. A, I want to change the code that is in Col. C, from that same row, to read “Kit”
Example: I find “IP” in Col. C. The coinciding number in Col. B is “4630.0”. I find that number in Col. A (one row down) and need to change the “CP” in Col. C to “Kit”.
Col. A Col. B Col. C
12345.0 46730.0 IP
46730.0 CP – (this needs to be changed to “Kit”)
In a large database with a large portion of cells that contains a flag to the left of a number "<LD 2.0" what would be the quickest way to move the flag to the left of the number so that it reads "2.0 <LD". This seems like it should be simple to do. I would prefer not to have to use a second cell and formula to do the modification if that makes sense. I'd rather do a "Find and Replace" if possible.
View 5 Replies View RelatedIn a1 i have 100.888 and a2 122.222 and a3 122.555UK,(and so on) in column b i want just want the number and not the uk, i have tried =left(a1,7) which works until a3 then it give me characters 122.555 and not the number/value 122.55. I need it as a value to use the vlookup, how do i do it?
View 3 Replies View RelatedI have a table of data that I need to find the leftmost and rightmost number in that are greater than a specified number in another cell. I've attached a spreadsheet to show what I've got to work with.
I need to do this 1 row at a time and have the outcome in descending cells on the right hand side of the 2 example rows.
Basically I have a phone number in column A:
123-456-1234
In column B, I want it to show me the first 3 numbers from the left, (so 123)
So I do =LEFT(A2,3)
Which gives me 123, but it's displayed as text, which ruins my whole formula that looks up the area code and displays the state.
I googled the problem and found http://exceltip.com/st/Make_LEFT_Fun...umber/778.html
which tells me to do:
=IF(LEFT(A1,1)=1,"Ignore",A1) [sees 1 as a number]
=IF(LEFT(A1,1)+0=1,"Ignore",A1) [sees 1 as a number]
=IF(LEFT(A1,1)="1","Ignore",A1) [sees 1 as text]
but when i try that it just displays the ENTIRE phone number: 123-456-1234
Pretty sure this has been asked but have searched the forum to no avail, but I need to extract the numbers from a value which has a letter on the end.
eg. 1000x I need to get out the 1000
or 2p I need the 2
I have sooooo many values ranging in numbers of digits, so just basic left(A1,2) won't work, I'm sure I've seen a search or find function but don't know how to use them!
I have to put different ticket numbers for a company with some code. At present, I am manually copying and pasting data (which is too difficult as sometimes, tickets may be more than 300). So, suggest some easy way out, keeping in mind that I am new to Excel. I want this as output.
Company Name= New Horizons
Code=CS/02
Number of Tickets=1/300
Here, I want to increment number of tickets automatically like 1/300, 2/300, 3/300 till 300/300 and all the other entities like Company name and code should remain same. My rest of data remains same except number of tickets through out. I also have to print same data.
I have attached an example. Basically I had this set up to calculate the row and give the answer at the end. But now I cant see the results without scrolling, so I want to move the answer fields to the C column and add new data into the D column while keeping all the data in the formula.
count 0 and negitive number cells since last positive number from right to left.xls‎
Im trying to pull together a formula to achieve the below. What i have is a spreadsheet to be used by staff in different countries so im looking to make it easy to modify the categories used without the user needing to do anything complex with formulas.
The right hand side of my file (C:E) shows a code for each year we have covered a country with the year as a prefix (2014 - Blah). The left (A:B) is a summary showing the latest year we covered that country.
Current formula:
{=IF(COUNTA(C2:D2)<=0,"","✔-"&MAX(LEFT(C2:D2&"0",4)*1))}
The current formula works fine if you set the columns to where the data actually is but for ease of use i need it to look at the data in rows 1:2 and match up the Continent/Country and then MAX the dates.
i know the forumla, using left and find to get the value of a cell to the left of the first space. (i.e if the cell said [url] click here then im looking for just [url]
however, when I try and use this in vba I cant get it to "find".
im trying to get the value of a textbox, before the first space
I have an excel sheet with one column containing deadline dates. I want the excel sheet to take each day's date and subtract it from the deadline date. If number of days left is less than 60. Send a mail via outlook to the email against that column.
View 3 Replies View RelatedOur office has a vacation days accrual policy based on number of years worked. We have a vacation days number, based on year of employment, the employee earns monthly. I need help with a worksheet, formulas, to document each employee, the year of employment they're in, # of days they have available based on the current month (which would need to add up automatically as the year progresses), then any days they request off, and finally a remaining balance of days left.
View 6 Replies View RelatedI have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula
e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).
I have columns A and B, and want to add values in column B based on corresponding criteria in column A. The criteria is if the first two characters in the string in column A = 15.
The only way I can think to do this is with LEFT, but LEFT asks for a specific string, and I want to evaluate each cell in a column. So I could write
=sumif(A:A,"LEFT(A:A, 2)=15",B:B)
but of course that doesn't work.