# Left And Mid Functions Inside Subtotal

May 5, 2009Have been messing around a bit with this.

So this is the formula without LEFT

=SUBTOTAL(9,C17:C22)

i want this

=SUBTOTAL(9,LEFT(C17:C22,1))

Have been messing around a bit with this.

So this is the formula without LEFT

=SUBTOTAL(9,C17:C22)

i want this

=SUBTOTAL(9,LEFT(C17:C22,1))

ADVERTISEMENT

I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."

so say the string is 111.111.1.222

column 1

111.111.1

column 2

222

my current code (which works, but its messy) for the first cell is

i have wrote the following code snipped:

Sheets(2).Activate

Sheets(2).Range("D8").Value = Application.WorksheetFunction.Subtotal(109, Sheet(4).Range("BJ3:BJ" & b)) + Application.WorksheetFunction.Subtotal(109, Sheet(3).Range("BJ4:BJ" & a))

The debugger said: That "Sheet" is not allowed in the subtotal-function. because i would like to calculate two subtotals in two sheets an write the sum in another sheet

I have two columns of data that I need to use SUMPRODUCT on. However, in one of the columns, there might be text after the number. The text can be several different characters. I only want to use the numbers, never the text. Also, there are usually blank cells within Column B and at the bottoms of both columns because this formula is going into a template for future worksheets that all have differing numbers of rows.

Example:

14T

16

40

20

150

97L

67

13

12

For the above example, I want the result to be 9879 (14*16 + 40*0 + 20*150 + 97*67 + 13*12 + 0*0 + 0*0 = 9879).

I've tried using the LEFT function to only get the numbers before any text, but I can't make it work with the blank cells at the bottoms of the columns.

I am trying to obtain price of an item using vlookup() function on the identifier “0003128” (7 digits) stored with “custom” format “0000000” in one worksheet. However in other worksheet, the identifier is stored as “000312” (6 digits) with “text” format without the last digit ‘8’. I tried using the left(A,6) function on “0003128” but instead of returning “000312” it returns “3128” and I’m unable to use the vlookup() function.

View 6 Replies View RelatedXL 2003

I want to combine these three functions

=VLOOKUP(e4,AGTNAME!$A$1:$E$3086,5,0)

=LEFT(E4,FIND("/",E4)-1)

and iserror

I've got a long list of account numbers of varying length and ultimately need to add a dash and a dot into these numbers. Here's an example

12345678 to> 1-2345.678

123456789 to> 12-3456.789

1234567890 to> 123-4567.890

The standard format is always 3 numbers after the . and 4 numbers between the - and .

I can get to this by doing a series of functions starting with this:

=LEFT(A1,LEN(A1)-3)&"."&RIGHT(A1,3) to get 12345.678 or 123456.789

copy/pasting that value into another field and then doing this

=LEFT(E1,LEN(E1)-8)&"-"&RIGHT(E1,8) to get the results above

I can't quite figure out the format to combine the multiple steps/functions into one so that I'm not copy/pasting values and re-doing the function.

I want to get the text inside the cell which is to the left of the first blank cell of a column.

I show the problema in the attach imageSin tÃtulo.jpg

I need a formula that will bring up the Model type of a product based on its Material code. All the models I need to generate have a "root" number in them (the first 6 digits define model type). This is what I need to fill out:

View 2 Replies View RelatedI have some code that run on Excel 2003, and fail on Excel 2000. It happens on functions Left, Right, Mid and Trim. I've found that I must use in "Late Bindings".

If exist any convertion for above functions?

way to do this but i have a sheet that is into 5 - 6 thous rows, in one of the columns (names) i sort it by names and then order it by subtotal for certain values.

What i need to know, is there anyway i can take just the subtotal values out and put onto another spreadsheet without copying and pasting it all as there are lots of subtotals and this would help alot as the other info is not nec. just the subtotal'd info. either that or is there anyway i can highlight the subtotal'd row info in yellow/bold text anything like that that would make it stand out without having to do it manually?

I’m trying to get my sheet so that at each change in month it creates a sum of the value but I want to sum to show up in the subtotal value column.....

View 10 Replies View RelatedI have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.

To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.

Current data structure looks like

Variable 1

Variable 2

Variable 3

[Code].....

I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.

For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae

A B C

1='Base Case'!A15='Base Case'!D15='Base Case'!G15

I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.

However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.

I am aware of the following topic in the VBA Help file:

"Using Microsoft Excel Worksheet Functions in Visual Basic

You can use most Microsoft Excel worksheet functions in your Visual Basic statements. To see a list of the worksheet functions you can use, see List of Worksheet Functions Available to Visual Basic.

Note Some worksheet functions aren’t useful in Visual Basic. For example, the Concatenate function isn’t needed because in Visual Basic you can use the & operator to join multiple text values."

And I'm aware of how to call Excel funcitons from within VBA; e.g., answer = Application.WorksheetFunction.Min(myRange)

However, not only are some Excel functions not useful; the fact is they cannot be used because VBA has a native function that does exactly the same thing and you have to use that native VBA function to achieve your goal. It is these overlapping functions that I am especially interested in. I want to know what I should use directly in VBA and what I need to go to Excel for.

I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .

My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if

A is equal to cell above it , means B Cell(Row above A but same column).

As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.

Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.

And also if A=B then I want to make that unwanted value cell="".

=BDP("067901108 cn corp cusip","px_last")

is there a way to insert 067901108 cn corp cusip from a different cell into the formula?

067901108 cn corp cusip <---A1

067901108 us corp cusip <---A2

something like this?

=BDP("A1","px_last") which equal to =BDP("067901108 cn corp cusip","px_last")

=BDP("A2","px_last") which equal to =BDP("067901108 us corp cusip","px_last")

I have the below code working but not doing everything that I expect. It counts the number of columns on one sheet and copies the headings to rows to another sheet. One thing is that sometimes there are more than 10 headings and there are only room for 10 rows. So after 10 I need to insert rows. Currently the below code counts and inserts rows correctly but for some strange reason it only copies headings to rows for the first 9.

View 11 Replies View RelatedDISCUSSION:

I have some general code that needs to be kept tidy so I have been experimenting with calling other Modules to keep that general code short and sweet.

PROBLEM:

How to put the SUB's inside of another SUB on a separate Module?

Here is the desired pertinent code on the general code sheet:

I have a userform that updates col's A thru E. (undetermined amount of rows)

I need to sum col's B thru E individually.

It would always be summing from row 3 of col B thru E.

I have the code that finds or selects the last cell of each col.

I'm not sure how to put the "countif" function code into VBA.

Example would be col B would be populated with the letter "A".

I would need to count how many "A's" in column B.

Okay, I know you can reference worksheet functions with code like:

application.search()

But how do you use a UDF function within VBA???

I tried, thisworkbook.UDF() (UDF being the name of any UDF) but it didn't work.

I have a table of values that are computed using input values from the first column (y's) and first row (x's). Each value in the table (z's) has a unique set of x and y.

In order to plot z vs x and z vs y I need to create a list of unique x,z and another of y,z. My question is how most efficiently to thus turn this table "inside out." The table will be very large, or I would do it by hand.

Trying to do a Subtotal in VBA...

View 13 Replies View RelatedI seem to be experiencing a problem using the SUBTOTAL formula. Is it not possible to use subtotal in a running command? ie [A2] = SUBTOTAL(102,A$1:A1) then drag for a couple cells vertically. "0" is displayed for ALL dragged cells.

View 9 Replies View RelatedI am trying to sum the subtotal on a range eg A1:A10 but I want to total up only the Absolute value of the visible cells.

View 9 Replies View RelatedI have a table of 3 coulmns :

(A) branches codes ( 1,2,3,4,5.......)

(B) names

(C) values

I want to put a formula in coulmn (D) cells to calculate the subtotal of coulmn (C) next to the last time each code appears in coulmn (A)

I am wondering if it is possible to do a subtotal and then name each subtotal with a range name to use in a formula on another sheet?

View 2 Replies View RelatedI have an excel work book that I want to extract certain info from Each tab where in the result tab I use this formula to get required data from another tab.

I has about 24 tab , in the 25th one i collect data from all previous , using below formula inside each cell to get

=INDEX('2014 wk12'!$C$1:$C$17,MATCH("Total LTD Result",'2014 wk12'!$A$1:$A$17,0))

Where 2014 wk12 is a tab name , so , it works fine

excel iss.png

What i want is t replace the sheet name which in previous example is 2014 wk12 with relative name in column A

The closest i have in mind is to make it as below ( it is not working ) so what shall be the working formula of the below

=INDEX('Tab name from Column A '!$C$1:$C$17,MATCH("Total LTD Result",'Tab name from Column A'!$A$1:$A$17,0))

So I have a formula which contains a countifs that looks like this:

=COUNTIFS($AZ:$AZ,$AZ15,$AM:$AM,ABS($AM15),$AD:$AD,$AD15)

However, I want the formula to count values when ABS($AM:$AM)=ABS($AM15) but I get an error if I try to put ABS($AM:$AM) as my range. Is there anyway to set my range as the absolute value of Column?

I have also tried ABS($AM15:$AM1000).

I have this: =LOOKUP(Budget!J3,B11:B42,E11:E42) RESULT: 5%. what I want: =LOOKUP(Budget!J3,B11:B42,(X3)11:E42) RESULT: 5%. I want excel GET the value inside X3 and and go to the other sheet with this variable. X3 = E

View 2 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved