Link Update Slow On Network
Nov 30, 2007
using excel 2003. trying to update file link to a new file, it takes forever. the file contains links to 50 tabs of other file. and both files are in the network drive. The formular is just refer to a cell in the other file, nothing complicated.
View 8 Replies
ADVERTISEMENT
Apr 26, 2009
I have Excel 2003 SP3 on Vista Home Basic fully patched. My code runs very slowly until I pull out the ethernet cable then it runs quickly.
View 9 Replies
View Related
Feb 5, 2010
I have attached a workbook that I want to be updated by the user. It contains a number of vlookups that to refer to a data source on a server communal to all users. I wondered if there would be anything that could be done in the workbook to help speed up an update?
View 9 Replies
View Related
Sep 26, 2008
My business has a significant number of Excel sheets interlinked. One of them has about 10.000 links to about 60 files. Those 60 files are within a sub-folder and once a quarter the business needs to replace all 60 files with a new set. To establish this, they replace the sub-folder name in the link with the new name. To do this on 10.000 links takes about 72 minutes because Excel seems to open up a file for every updated cell. We tried to stop this by changing Excel to calculate manual, disabled "Update remote reference", but this didn't improve anything.
We have similiar issue when opening/updating the master file - it takes around 3 mins.
Besides that a proper database is certainly better for this requirement, is there anything we can do to improve the performance of the replace method. I was thnking about stopping Excel from validating/updating each single cell and after everything has been replaced to do it in one go without Excel opening and closing 10.000 times a file.
View 4 Replies
View Related
Jul 9, 2013
I have created a spreadsheet that consists of a link to an Access query. Everything works fine for me. I have put the database in a location that is accessible by the people that I want to use the spreadsheet but when they open it they get the error : "The query did not run or the database did not open."
View 1 Replies
View Related
Sep 10, 2006
I have 2 WorkBook, Division.xls and Department.xls. The Sheet1 in the Department is linked & getting the values from Sheet1 in the Division & works fine. But if there is a change in Division workbook, its not affecting here immediately. When i close the Department.xls and open again, i can find the latest values. I thought the links to the other sheets or workbooks will be updated when i press the save button. So I used the SendKeys "^S" in the VBA. But it fails. Is there any way to mention through VBA code to update the recent values to the Department workbook from Division.
View 7 Replies
View Related
May 20, 2007
I made drop down form controls that specify yes/no as to whether I have the documents I need for a project- when I selected yes the same row will turn grey. Each form control is set to move/resize with its cell, so it stays on top of the cell. I have the drop down form set to cell link to the cell below it in the form control settings. So it would be over cell A1 and the value of 0/1/2/ would be entered into A1. However whenever I copy the cell/row, the new form control drop down does not update its cell link by relative positioning, the new cell link is also A1 – thus both drop downs are linked together. I do NOT put absolute referencing $A$1 so I don’t know why the new copied forms don’t update and point to B1?
Why doesn’t my drop down menu update its cell link position when I copy and paste the cell it is attached to? Can form controls update their cell links via relative references (that is without the $$)?
View 3 Replies
View Related
Jul 14, 2007
I'm sure this is an easy one but it's unfortunately beyond me. I have a update links formula in which I would like for it to update with the name of the file being in a cell. Example:
The file name is Week20.xls
Cell A1 has the value of Week20.xls using a formula (="Week" & A2 & ".xls")
Currently I have it by looking at the actual file location like this: ='C:Documents and SettingsMy DocumentsWeekly Sales6 Sales Comparisons[Week20.xls]Daily Comparisons'!$I$4
But rather then pointing directly to the file path I want it to update by the name of the file in A1. So I'm sure its something as simple as replacing [Week20.xls] with some formula but I don't know what that one is.
View 3 Replies
View Related
May 30, 2008
When I open a particular workbook by double-clicking in My Documents or using File|Open, I want to suppress the dialog box that appears requesting to update links in the workbook. I want to suppress it using code, perhaps in the workbook_open event?
View 4 Replies
View Related
Nov 1, 2013
I have a excel workbook with One Master Sheet.
The data entered in the master sheet is automatically updated in the sub worksheets through direct links created . Each sub worksheet is a branch of organization. almost 100 branches are there.
The data is entered for all the branches in the Master Sheet at different periods continuously which is to be kept as such.
For example In first day 10th, 15th branch data may be entered in master sheet first and second row, which is getting automatically updated in the respective branch worksheets. But the problem is when the data is entered for any branch( for example 6th branch) in 5th row of Master sheet, in the respective 6th branch sheet also, it is updated only in 5th row only, leaving the first four rows blank. But i want the updation in the branch sheet continuously without any blank rows.
For updation i have used the simple direct link between the cells of Master worksheet and Branch sheets.
How to get the updation in branch worksheets while entering the data in Master sheet without any blank rows.
View 6 Replies
View Related
May 31, 2006
I'm using Excel 2002.
I have one workbook with data linked to another CSV file (It's about 40000rows). When I open the workbook, "THis workbook contains one or more links that cannot be updated." message appears and asks me to open csv file if I wanna to update (although I set full path for links in cells). I wonder if there's any way to update link without opening csv file? Or Excel can not update link without openning the resource file?
View 3 Replies
View Related
Aug 11, 2014
I have a vba script that makes a pivot table, works well, but I need to link the pivot table filter to a 'namedrange' cell on a spreadsheet. I have found the code below on google but can't seem to get it to work, when the cell is updated the pivot does not refresh.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As Worksheet
Dim pt As PivotTable
Dim pi As PivotItem
Dim strField As String
View 1 Replies
View Related
Dec 12, 2006
In an Excel sheet i have set up a link to an Access database query (select query) using the Import External Data method. The data is store sales by week, arranged in a pivot table layout (stores as rows, weeks as columns). As time goes by, the database will be updated for new weeks sales, and i would like to refresh the data and the new weeks automatically appear in the Excel sheet, in subsequent columns.
At the moment, the only way i can seem to get this to work is to open up the link in MSQuery and manually select the new weeks from the Access query. i have set the parameters to overwrite cells with new data rather than insert new data. i'm sure there is a way to do this, as it feels like it would be a common thing to want, but i can't seem to find an answer anywhere!
View 5 Replies
View Related
Jul 6, 2006
Despite setting the "Edit/Links/Startup Prompt/Don't display the alert and update links" option numerous times, my workbook still prompts me to update links every time I open it. The option seems to be set okay (it is preset whenever I go into the "Edit/Links/Startup Prompt" dialog), but it doesn't seem to affect the workbook's startup behaviour. The workbook contains a ComboBox control that is initialized with customer names from another workbook, which is included in the References for this main workbook.
I am using Excel 2003 (from Office Pro 2003) under Windows XP (SP1). I believe this used to work without the prompt when I was working on this app last fall (I'm not sure, as my memory of specific behaviours back that far is fuzzy). However, it has been persistently prompting ever since I started working on this app again this spring/summer. Was there perhaps a bad fix to Office 2003 (that I automatically applied) that broke this feature?
View 5 Replies
View Related
Jul 31, 2006
I’m working on quite huge spreadsheets. The same formula will be used on more than 30 sheets.
So far if I have to change the formula in one cell I have to go to each sheet and change it manually (which is quite boring and time consuming).
I’m wondering if it’s possible to reference all the formulas on the sheet to one sheet (which some kind of a master sheet with all the formulas).
I can copy the formula with the “Past Special” function but the function is not updating if I change the formula on the main sheet.
So is it possible to link it and that it’ll be updated automatically when I’m changing the formula on the main sheet?
View 9 Replies
View Related
Jun 28, 2013
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
View 6 Replies
View Related
Sep 5, 2008
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies
View Related
Oct 18, 2013
Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
View 13 Replies
View Related
Feb 23, 2014
I recorded a print macro which prints to my default printer, others will be using this spreadsheet so I really need it to print to the same network printer. The printer address and name is: ironyan-fileBI44
How do I incorporate this into my code?
[Code] .....
View 7 Replies
View Related
Jun 3, 2014
Is it possible to retrieve the network name of the local workstation and if so how?
View 2 Replies
View Related
Jan 6, 2009
We have a form that is completed by our employees and emailed to a central group email address that up to 8 employees within our team can access. When one of our 8 team members open the file sent they need to add comments to it and then save it in a central directory on one of our network drives.
Now the problem I have is that we all have the network drive mapped to a different letter.
Is there a way that I can have a macro (see below for current macro that does not work) save to a network path and not a drive letter.
View 10 Replies
View Related
Apr 15, 2009
I have a command button in a spreadsheet with the following code attached to it
View 4 Replies
View Related
Sep 29, 2009
As above i have a macro which opens a workbook which is on a network drive. This works fine for my multiple users...however i have discovered that if they do not have the drived mapped with the same drive letter at the start...it will throw up an error advsing that the file does not exist. Is there any way to by pass this.
Ex - "TestFile.xls"
File is stored in "E:NetworkTeam1Testfile.xls"
However, some users have access to this file and it is mapped as E:, but some users have been mapped as F: The advisors who have been mapped as F: cannot access the file. Is the VBA/Macro smart enough to bypass the drive letter and just search the rest of the past...NetworkTeam1Testfile.xls".
View 2 Replies
View Related
Jan 29, 2007
I have code below that works well most of the time. One of the cases below will not work. It insists on requiring a name and password.
(note: it is the only Windows 2000 operating systems)
I want to enter this in my case line to automatically add the username and password.
Let's say the username is: "dave" and the password is: "happy"
How can I add this to this part of the code?
Case "DJ"
strfilename = "\DAVEJONESDavesProposals" & strfilename
Sub Save_and_SaveSalesman()
Dim strPath As String, strPath2 As String, CurrPath As String
Dim WB1 As Workbook
Dim WB2 As Workbook
View 9 Replies
View Related
Apr 28, 2008
I have written a function (with the help of the good folk on this wonderful message board) that is able to check whether a given spreadsheet is currently being used by someone at my work. There are potentially multiple users for the workbooks that my system needs to access. FYI, I work in a bank so we have a pretty good network.
The code for my function, as well as the TestOpen(-) function that it uses, is below.
Ideally, if a workbook my system needs is currently being used on someone else's computer (Case=1 in Select statement, then Err0) I would like to be able to have a userID returned to me so that I know who I need to call to shut the model.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Function Open_Selected_Drone__EXEC(fs, fileLocation, fileToOpen, testOnly)
Application.ScreenUpdating = False
myName = ActiveWorkbook.Name
Application.StatusBar = "Checking availability of " & fileToOpen
iOpen = TestOpen(fileLocation & "" & fileToOpen)
Select Case iOpen
Case 0: ' the file has been found and is not in use
rv = "not in use"
If Not testOnly Then Workbooks.Open Filename:=fileLocation & fileToOpen, WriteResPassword:="j"
The old version of this message board used to have an "insert code" button. I cant see it anymore. Am I simply meant to paste code into this message box now?
View 9 Replies
View Related
Oct 1, 2008
I'm trying to call a sub in an exce. file that resides on our network drive so that multiple users can access the programs that I develop and I can get VBA to open the file but I can't get it to open the sub titled "DCU". I keep getting the following error.
Cannot run the macro DCU. The macro may not be available in this workbook or all macros may be disabled.
Here is my code that errors.
Option Explicit
Sub DESCRIPTION_CLEANER_UPPER()
Application.Visible = True
Workbooks.Open Filename:= _
"\Cansvp01grp_01fCommonCommon-PartsPrcngMacrosMacros.xls"
Application.Run "DCU"
End Sub
View 9 Replies
View Related
Oct 30, 2008
Is there a way to test for an active default network printer?
In my module the code sets the paper size and a few other printer settings, if my default network printer is down or offline the code fails.
If I could test for active default printer I could remove this error.
View 9 Replies
View Related
Jun 1, 2006
We have created a spreadsheet that needs to be protected as it is viewed by several users. We would like, if possible, to update this daily with as little human intervention as possible.
Can we use VBE and the on worksheet open event to unlock the password protection, update the sheet and then lock it again? I know that you can read who opens the sheet using code similar to the following but don't know whether the password protection can be "unlocked" utilising this method.
View 6 Replies
View Related
Jan 3, 2007
I have 2 workbooks, one containing one worksheet that acts as a Template a second that has some code attached to a button that uses the Template to create new worksheets based on the Template. The problem I have is that when I run the code over a network I always get a read only worksheet created. I need it to be readwrite. I have used sharing on the Folder where the 2 workbooks are located so it accessable over a network. There is no problem when I run the code on a standalone machine.
Private Sub CommandButton1_Click()
Dim tClient
Dim tAddress
Dim tPhone
Dim tItem
Dim cOriginalLoan
Dim cAgreedInst
tClient = Client
tAddress = Address
tPhone = Phone
tItem = Itm
cOriginalLoan = loan
cAgreedInst = Inst
Sheets("swbrd").Select
PathName = Range("A196").Value 'Here is where the full path to the Template is found.................
View 3 Replies
View Related
Jan 20, 2007
I wrote a macro that runs perfect when started from my pc, but if started from a different ps which is logged into the same network it doesn't run, also the macro is stored on the server. I have a code in the private section of the workbook:
Private Sub Workbook_Open()
Call FINAL
End Sub
then the macro 'FINAL' is stored in the 'Modules' section and starts with:
Sub FINAL()
'this part opens the Edit/Links dialog from which the user has to choose the relevant model
Dim Which_financial_model_contains_the_data As String
ActiveWorkbook.ChangeLink Name:= _
"T:DEALSSSalsa (Project)Financial modelsProject Salsa Model - BASED ON SPONSOR CASE - b - 20061214.xls" _
, NewName:= _
"Which_financial_model_contains_the_data" _
, Type:=xlExcelLinks
View 6 Replies
View Related