Link To Specific Cell In Preceeding Row!
Sep 29, 2008
This time I need to be able to reference a specific cell in the preceeding row of a GETPIVOTDATA formula. This is shortened example but it shows what I am trying to achieve:
A B C
NAME ID FRQ
Spellbound 1234 W
Spellbound 1234 W
Spellbound 1234 W
The GETPIVOTDATA formula is located in C6 in this example and needs to reference B5 i.e. the last ID cell reference. I need to work the formula this way as it will be placed at varying intervals in column C and the preceeding data for each NAME will vary as to how many rows each NAME contains.
View 2 Replies
ADVERTISEMENT
Jun 26, 2014
There is a problem in joining one cell to the other file
The below is screen shot when l click the on every cell the image must be open
How can do it?
Capture.PNG
View 1 Replies
View Related
Aug 17, 2009
Is it possible to have a macro create a hyper link once data is entered into specific cell, i have a multi sheet work book used as a stock card system.
Each stock item has its own worksheet and the product code is entered in to cell E3
(which in turn has a macro in it to change the sheet name to match the product code).
the macro also inserts a row of info into row 5 of another sheet used as a summary sheet ( CONTROL.SHEET or SHEET 4) using copy and paste link.
i need a macro to generate a hyperlink in cell D4 of the control sheet between the row info and the matching product code sheet ( the product code is displayed in cell E4 of the control sheet.
I only input one item at a time and then manually cut and insert the row info into the stock list on control sheet. so every time i input a new item, the row info is always in row 5 of the control sheet.
View 9 Replies
View Related
Nov 18, 2007
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
View 5 Replies
View Related
Jun 23, 2008
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies
View Related
Jul 7, 2007
i have a number formate 0000001 and another formate 0000123005
i would like to move only all the zeros on the left side of the number .
i got this code from Dave before:
Sub KillZeros()
'*Note: Column B must be the Entry No one
Range("B:B").Replace What:="000", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByColumns, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
View 9 Replies
View Related
Feb 27, 2009
I am trying to create a CSV file to import all of our workers into a payroll software. Unfortunately the list of workers that I have been given to work with has a first and a last name together in one cell. I need to split them into separate cells so the data ends up in the right field in our software. By importing external data and separating the names with the comma as a delimiter, I have ended up with the first name in one cell and the second in another, which is exactly what I need. However, this process also ends up putting a quotation mark in front of the first names in the cells in column A, and a quotation mark after the second name in the cells in column B.
I remember to removing trailing spaces with a macro once, and I am hoping the same theory can be applied to make two macros - one to remove preceding quotation marks, and one to remove trailing quotation marks. The only trouble is, I know no VBA whatsoever, and don't even know how to make a macro unfortunately. Would someone mind letting me know if what I need is possible, and then - literally step by basic step - explain how to make a macro and provide the code to paste into it?
View 2 Replies
View Related
Jun 28, 2013
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
View 6 Replies
View Related
Jul 18, 2006
how I can use a hyperlink to access a particular sheet of another workbook? for eg, I have 2 workbooks, A and B.' A ' has a set of 15 hyperlinks. When I click the first link in 'A' it should open sheet 1 in 'B' and when i click link 2 it should open 'sheet 2' in 'B'. How can I do that?
View 6 Replies
View Related
Aug 29, 2007
I have excel worksheet with 2 sheets in it. Let’s call the one "Database", it consist of 713 rows and 15 columns with data in of my product. Then the other one "Display Product" in it you type in the code of the specific product so it search for my code and display all of the information of that product code on the "Display Product" sheet and it that work.
Now I want to link a picture to that specific product to the code. Here's the code I used:
Private Sub Worksheet_Calculate()
Dim oPic As Picture
Me.Pictures.Visible = False
With Range("A71")
For Each oPic In Me.Pictures
If oPic.Name = .Text Then
oPic.Visible = True
oPic.Top = .Top
oPic.Left = .Left
Exit For
End If
Next oPic
End With
End Sub
Now this code works fine up to a specific limit in my case 66 picture to a product, and I need at least 200 more images in it but I get a runtime error in my macro when I put one more image in. This is where I get the run time error -> “Me.Pictures.Visible = False“.
I don't know if excel is limited to image usage. Or maybe there is another way to do what I want to do with more advance coding.
View 12 Replies
View Related
Aug 28, 2009
Basically, I have a large spreadsheet with basic data including names, dates and a unique identifier number (UIN). I have created a questionnaire in a userform (with a UIN txtbox) and want to link the answers to the specific individuals on the worksheet.
i.e. If UIN 201 fills in the questionnaire on the userform it will enter the details on the spreadsheet next to the details already entered for UIN 201.
View 14 Replies
View Related
Dec 31, 2007
I have a list of terms to put together and what I have is a master list of 6 concatenate functions and I need to link them to all the different words in my list.
The first word in collumn A needs to be with the function in D1, the second word (A2) needs to be with D2, then A3 with D1, and A4 also with D1, while A5 with D6, etc.
It looks something like this:
for your info...I have put numbers in the adjacent cell corresponding to which of the 6 concatenate functions need to go into the cell in collumn C
So in reality all I need is a function that would rearrange my list of 6 functions from Collumn D into collumn C based on the numbers 1-6 I have in collumn B
Workbook.txt
(attached is an example to better see what im talking about. Disregard that the concatenate functions are not working...it doesnt matter right now.)
View 14 Replies
View Related
Sep 16, 2009
Sometimes my due dates need to be on the 15th of the month, for which DLL and Donkey gave me: =DATE(YEAR(TODAY()), MONTH(TODAY()) + (DAY(TODAY()) > 15), 15)
This works great except sometimes the 15th is on a Sunday which means I need the result to be the 13th, and sometimes it's on a Saturday which means I need the result to be the 14th. FYI: I am a n00b..
View 2 Replies
View Related
Jan 20, 2009
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
View 3 Replies
View Related
Apr 16, 2014
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
View 2 Replies
View Related
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
View Related
Apr 4, 2013
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
View 6 Replies
View Related
Jul 1, 2014
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
View 11 Replies
View Related
Sep 14, 2008
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
View 14 Replies
View Related
Aug 12, 2014
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
View 1 Replies
View Related
Jun 3, 2008
I have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
View 3 Replies
View Related
Nov 17, 2008
I would like to have a link in a merged set of cells that puts the insertion point to another cell. Scenario: In cell k30, the user puts in the amount of credit card debt a individual has, and scripts the user based on that information. Later on, they get a more accurate running total of the amount of debt and need to change the amount in k30 for an accurate quote. After ther running total, in cell j172(a merged box for instructions) i instruct the user to be sure to enter the new total in cell K30.
Questions:
1. Is there a way to put a button or a link that would put the insertion point back up to K30 automatically, but allow the user to change it themselves and not change it automatically?
View 2 Replies
View Related
Aug 27, 2009
I would like to ask if there's a way that i can create a link in a cell to another cell. Sample: in cell A1: there's a word "click to go to cell A150" in this case i dont have to use scroll down to go to cell A150.
View 2 Replies
View Related
Apr 29, 2014
I have a column on a spreadsheet containing the last four (XXXX) or in some cases six (XX-XXXX) if there are duplicates of the last four SSN. I manually enter these as needed. I also create a folder that will be named the last four or six in the same format that is in the excel spreadsheet. Is there a simple way to automate the linking of these cells to the external folders?
View 3 Replies
View Related
Mar 12, 2014
I have a macro that copies a sheet and renames it:
Copies "Q114" and renames it to "Q214".
Q114 is defined as OLD in my VBA code
Q214 is defined as NEW in my VBA code.
I also have a third sheet, call it "results", which picks up cell values, ie cell A1 in "Q114", but now I want it to use cell A1 "Q214". The values hasn't been filled in, so I need a link between them:
[Code] ......
View 2 Replies
View Related
Nov 3, 2006
if it is possible to link the name of a tab to a cell in its corresponding worksheet.
View 9 Replies
View Related
Mar 9, 2009
I have is a summary worksheet with two columns. One column is for Project ID number and the other is an address link to a specific cell in the worksheet corresponding to the Project ID. Perhaps the best way to explain this is by giving an example:
Project ID (Column 1)
00-111
Balance (Column 2)
='C:Financial Sheets[00-111.xlsx]Phase_21'!$H$1
As you can see the spreadsheets are named after the Project ID number. What I would like to do, if possible, is instead of typing in the name of the spreadsheet for each project in column 2 (Balance), I could somehow reference the cell value in column 1 (Project ID). Something like this:
Project ID (Column 1)
00-111
Balance (Column 2)
='C:Financial Sheets["A2".xlsx]Phase_21'!$H$1..........
View 3 Replies
View Related
Jan 25, 2010
Can you link a cell to a sheet tab. If yes how?
View 4 Replies
View Related
Oct 6, 2011
When I use the following link it works perfect
='W:APMProdqtyElectronic Shift Book8882Line 1[wk 40.xls] Flipchart'!$B$36
But when i replace Drive W to the full server location
='iemafs001APMProdqtyElectronic Shift Book8882Line 1[wk 40.xls] Flipchart'!$B$36
I get #REF!
View 1 Replies
View Related
Dec 4, 2012
Is it possible to link a sheetname?
I have a list of employees on sheet1 and each employee has there own sheet with their name as the sheet name. Each sheet contains a form that the employees need to fill in.
I have created several extra sheets for new employees and I would like these sheet names to be linked to a cell on sheet1. This way the only updating I need to do when receiving new employees is enter there name to the list in sheet1.
View 7 Replies
View Related
