VBA To Link Cell Between Different Sheets?
Mar 12, 2014
I have a macro that copies a sheet and renames it:
Copies "Q114" and renames it to "Q214".
Q114 is defined as OLD in my VBA code
Q214 is defined as NEW in my VBA code.
I also have a third sheet, call it "results", which picks up cell values, ie cell A1 in "Q114", but now I want it to use cell A1 "Q214". The values hasn't been filled in, so I need a link between them:
[Code] ......
View 2 Replies
ADVERTISEMENT
Jun 28, 2013
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
View 6 Replies
View Related
Jan 29, 2010
I have a cell that a I want to get the results of a SUM to 20 cells in 20 worksheet out of 60 worksheets. When I enter my' =sum( shows up with serial_numbers. When I go to each sheet and select the cell I want (same in all worksheets) like in sheet 2 it shows my sheet name and cell. But when I go to my sheet 3 and select that cell it replaces sheet 2 with sheet 3 it does not keep adding the sheets with the cell numbers. When I select all sheet tabs it still only changes the sheet number in stead of running a range. I could type all the sheets names and cell but lots of work and I have a lot of this type of ranges to do.
View 2 Replies
View Related
Jun 20, 2007
“Pre” is where the user type information and these information would then shared throughout all the sheets. There are a total of 5 things that I need to be done… (Those indicated with numbers are the ones that need to be done).
1st thing: How to highlight the days for all the TERM BREAKS?
2nd thing: How to link the dates for the Public holidays to “P1_B1” and highlight it red. Without using conditional formatting because there maybe more than 3 public holidays.
3rd thing: Number of groups entered here would create rows of group according to the number of groups entered in “Pre”
4th thing: The number of classes entered here would create the number of rows for each particular subject. Eg. English has 3groups so there are a total of 3 rows.
5th thing: The number entered for the number of programmes would create new sheets with respective to the number entered there.
*I have to only enter no the “Pre” sheet and it will automatically link the information across the rest of the sheets without the need to press RUN. *
View 2 Replies
View Related
May 8, 2014
I build a tool in excel to make an analysis per industry (30 industries). I want to compare the results on the first sheet, as a summary. All the information is now scattered over the sheets, but what I want to do is when you change the ticker in column A, it automatically retrieves the information from on of the sheets for the specific company. I will try to make myself clear to attach a screenshot.
So if you change ticker in column A, I want to fill columns C:D:E, G:H:I, K:L:M, O:P:Q, etc automatically according to the company name.
View 5 Replies
View Related
Jan 15, 2008
I need to link two text boxes on two different sheets. Is there a excel formula or macro to do this. I am entering text in textbox 1 on sheet1 and same text needs to show in textbox2 on sheet2.
View 4 Replies
View Related
Jan 27, 2014
spread sheet training matrix. The subjects to be trained on are plentiful so I have broken these down into different sheets. I produced this to my boss and the first thing he asked was "can we link the sheets so I can get information about one single employee" in other words I have a list of employees in the first column and this list is the same on each sheet, the headings on the sheets are different but instead of having a set of columns about forty headings wide I have split them down to ten headings on four sheets. The big question! Is it possible to print one sheet with one employee but all of the headings? When I say headings I mean the columns under the headings as well.
View 4 Replies
View Related
May 28, 2009
I have an excel file containing three sheets(1,2,3). And each sheet has 9 Columns (A,B,..,I). Now for the first sheet i have a functioning mask (userform) through which i can edit the columns live and add new rows.
Now i have a userform which is devided into three parts. The third and the last part is working fine which is linked to Sheet 1. Now i want the first part(on the top) of the form to be linked to Sheet 2 and the midpart to sheet 3.
In first and second part of the userform there is button (copy this to sheet 1 as new). This button should be coded in a way that if its clicked then the active entry (in sheet 2 or in Sheet 3) should be pasted at the end of the sheet 1 rows and the textboxes linked to sheet 1 should jump therer so that the new entry can be edited directrly in sheet 1.
The mask can be opened by the button in Sheet1 column A1! I am using 1280x1024 pixels for my grafikcard.
I am attaching two files. Excel file 2003 xls in zipped form and an image of the mask as jpg.
View 9 Replies
View Related
Jun 28, 2007
Is it possible to somehow link sheets in excel to different tables in Access so when I update the sheets in excel it can automatically update the tables in access?
Doesn't have to be on line but I want to avoid the continous copy paste or exporting and trying to automate this process.
View 4 Replies
View Related
Aug 31, 2009
I would like to link students for the 1st Nine Week list to the correct grade level as shown. I have attached a file.
View 2 Replies
View Related
Dec 19, 2012
I am very new to using excel and I need connecting the information between two sheets. I have a weekly schedule that I want to use for my employees. I want that information to automatically be moved to a daily schedule. I need to be able to see how many openers closers and mid-shifts I have and how many hours I am consuming from my budget. I want the shifts from the schedule to be moved to the daily schedules in order in chronological order (morning shifts first, then mid-day/closers). If at all possible how I would like to have the span of their shift to be highlighted in the cells on the daily schedule.I will attach what I have so far to provide as much info as possible.
example.xlsx
View 1 Replies
View Related
Nov 1, 2013
I have a excel workbook with One Master Sheet.
The data entered in the master sheet is automatically updated in the sub worksheets through direct links created . Each sub worksheet is a branch of organization. almost 100 branches are there.
The data is entered for all the branches in the Master Sheet at different periods continuously which is to be kept as such.
For example In first day 10th, 15th branch data may be entered in master sheet first and second row, which is getting automatically updated in the respective branch worksheets. But the problem is when the data is entered for any branch( for example 6th branch) in 5th row of Master sheet, in the respective 6th branch sheet also, it is updated only in 5th row only, leaving the first four rows blank. But i want the updation in the branch sheet continuously without any blank rows.
For updation i have used the simple direct link between the cells of Master worksheet and Branch sheets.
How to get the updation in branch worksheets while entering the data in Master sheet without any blank rows.
View 6 Replies
View Related
Jul 24, 2007
I have a sheet with 3 macros. It consists of two macros to produce results, and the third to bridge the two together where is all starts. I have built a userform in the sheet and am trying to get the variables in both sheets, to be user changeable and selectable via the userform.
In the attached data, the userform allows for the selection of two sheets, A and B. The user would select in A the sheet with data which is equivalent to Oval_An and in B the sheet with the data equivalent to Oval_DMA. The first macro, Find_75 runs, followed by the second macro, kTest, all working to produce results when hitting the Subtract button on the form. The Find_75 tolerance are also defined via the useform box, as well as kTest's compare tolerance.
View 6 Replies
View Related
Apr 21, 2009
I have a list of items in column A of Sheet1 and the same list in column A of Sheet2. Both list will contain the same items, however not necessarily in the same order.
What I want the book to do is; when I click on an item in the list on Sheet1, it takes me to the same item in Sheet2.
Is this possible with VBA?
View 10 Replies
View Related
Jun 17, 2008
I have a workbook with about 200 sheets.
Each sheet contains lots of links to the other sheets, so the user can clink the link and then go to the new sheet.
But, how do I make a "return-function"? That can return the user to the sheet that was active before the link was followed? If possible I would like this do be doable for 5-10 sheets back.
This "return-function" is gonna be used by clicking a button on a floating toolbar I have connected to the sheet.
View 9 Replies
View Related
Sep 4, 2009
I am trying to link data from multiple sheets in a file into one sheet. This is the following I want to achieve.
1) I want to pull data from the tab - Tab 1 (in the attached sheet) from column F only if the column E cell has 3, into the "Plan" Sheet in cell D5. I want all the 3's information from Tab 1 (F12, F14, F16 and F17) to be in the same cell D5 with alt+Enter spacing. The trick is these cells may not be always 3 they can be either 1,2,3. So the function needs to go through the entire range E10:E69 to find where there are 3 in the E column and then return the corresponding data from the F column to the "Plan" sheet in Tab 1.
View 4 Replies
View Related
Aug 12, 2014
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
View 1 Replies
View Related
Jun 3, 2008
I have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
View 3 Replies
View Related
Nov 17, 2008
I would like to have a link in a merged set of cells that puts the insertion point to another cell. Scenario: In cell k30, the user puts in the amount of credit card debt a individual has, and scripts the user based on that information. Later on, they get a more accurate running total of the amount of debt and need to change the amount in k30 for an accurate quote. After ther running total, in cell j172(a merged box for instructions) i instruct the user to be sure to enter the new total in cell K30.
Questions:
1. Is there a way to put a button or a link that would put the insertion point back up to K30 automatically, but allow the user to change it themselves and not change it automatically?
View 2 Replies
View Related
Aug 27, 2009
I would like to ask if there's a way that i can create a link in a cell to another cell. Sample: in cell A1: there's a word "click to go to cell A150" in this case i dont have to use scroll down to go to cell A150.
View 2 Replies
View Related
Apr 29, 2014
I have a column on a spreadsheet containing the last four (XXXX) or in some cases six (XX-XXXX) if there are duplicates of the last four SSN. I manually enter these as needed. I also create a folder that will be named the last four or six in the same format that is in the excel spreadsheet. Is there a simple way to automate the linking of these cells to the external folders?
View 3 Replies
View Related
Nov 3, 2006
if it is possible to link the name of a tab to a cell in its corresponding worksheet.
View 9 Replies
View Related
Mar 9, 2009
I have is a summary worksheet with two columns. One column is for Project ID number and the other is an address link to a specific cell in the worksheet corresponding to the Project ID. Perhaps the best way to explain this is by giving an example:
Project ID (Column 1)
00-111
Balance (Column 2)
='C:Financial Sheets[00-111.xlsx]Phase_21'!$H$1
As you can see the spreadsheets are named after the Project ID number. What I would like to do, if possible, is instead of typing in the name of the spreadsheet for each project in column 2 (Balance), I could somehow reference the cell value in column 1 (Project ID). Something like this:
Project ID (Column 1)
00-111
Balance (Column 2)
='C:Financial Sheets["A2".xlsx]Phase_21'!$H$1..........
View 3 Replies
View Related
Jan 25, 2010
Can you link a cell to a sheet tab. If yes how?
View 4 Replies
View Related
Oct 6, 2011
When I use the following link it works perfect
='W:APMProdqtyElectronic Shift Book8882Line 1[wk 40.xls] Flipchart'!$B$36
But when i replace Drive W to the full server location
='iemafs001APMProdqtyElectronic Shift Book8882Line 1[wk 40.xls] Flipchart'!$B$36
I get #REF!
View 1 Replies
View Related
Dec 4, 2012
Is it possible to link a sheetname?
I have a list of employees on sheet1 and each employee has there own sheet with their name as the sheet name. Each sheet contains a form that the employees need to fill in.
I have created several extra sheets for new employees and I would like these sheet names to be linked to a cell on sheet1. This way the only updating I need to do when receiving new employees is enter there name to the list in sheet1.
View 7 Replies
View Related
Jan 28, 2014
In Excel it's possible to create a link dependent of a cell.
Example
='C:UsersAMDesktop[" & C9 & "]Sheet1'!$B$3
where C9=Andrew.xls
View 7 Replies
View Related
Feb 20, 2014
I am trying to convert a formula that refers to another workbook as text.
E.g. in cell A1 the formula is "= '[Management Pack for January 2014.xlsx]Monthly Income Statement'!$G$23"
How do I in cell A2 show the reference "'[Management Pack for January 2014.xlsx]Monthly Income Statement'!$G$23" as Text?
The above formula changes the whole time.
View 2 Replies
View Related
Jul 25, 2008
Sample data:
Machine Part Number machine 1 123 machine 2 123 machine 3 123 machine 1 123 machine 2 456 machine 1 456 machine 3 456
i need to based on tis sample data come out with sth like tt:
Used In: 123 Machine 1, Machine 2, Machine 3 456 Machine 2, Machine 1, Machine 3
I need to group those machines under 1 part number. For instance, part 123 is used in which machines, I need to state them in a way like above. But repeated should not be stated again.
View 9 Replies
View Related
Apr 10, 2009
In Excel, I have a sheet for each team that I manage. Each sheet lists the team members and displays their picture below their names. Some people are on multiple teams/sheets.
I have a master list with everybody's name and picture that I copy and paste the pictures from when putting a team together. This has become a very tedious process.
Is there a way I can type the person's name on a team sheet and have their picture automatically appear below their name? I don't know if this can be done with some kind of lookup or if it will involve VB. I tried making the picture the background of an Autoshape or comment, but I could not figure out how to dynamically change the picture based on the name in a cell.
View 9 Replies
View Related