the actual output of the error message when I run my macro.
To repeat it, it says, "Regression - Having trouble offsetting input/output references"
The two button choices that appear on the bottom are "OK" or "Help." The OK button allows the macro to keep running (until it finds that it cannot find the regression output that was supposed to be created.
I would like to know if it is possible to transfer values of cells this way?
I've attached the excel file for easier reference.
I have code where the user inputs a date, the macro finds this cell and sets rngFound as the location of that cell. The macro then creates a new workbook with new worksheet. Using rngFound as a reference, I need to sum the cells one below and five to the right and put this sum into a cell on the new worksheet.
I did a little research and found the offset which takes care of the referencing, but I cannot figure out how to incorporate this into a sum function in vba.
Below is my attempt. Previous to this part of the code, I am active in the newly created worksheet so I am attempting to input a formula based on offsetting the found range. Another problem is that I am going to have to repeat this step for 50 rows going down. Is there a way to set a loop? Or would I have to write out this code, changing the ranges and offsets 50 times?
Code:
Range("D2").Select
ActiveCell.Formula = Sum[(OrigWks.Range(rngfound.Offset(1,0))):(OrigWks.Range(rngfound.offset(1,4)))]
I am trying to use an IF statment to look at 2 values, 1 from a defined range and the second based on offsetting the the first to Format a number of cells with a worksheet. Affectivley if the First Value is "E" and the value two columns to the left is a Sat or Sun I wish to format the row slightly differently from if it is a weekday. (There will be an M and a L as well)
View 5 Replies View RelatedI got a question where I cannot think of a good descriptive title for, I have seen this done but do not know how it is done. An internet user inputs data onto a web form, and and presses a submit button. The submitted input is 'processed' on a through excel and outputs the result back the internet user.
Two questions
1 - what is a good title for this?
2 - how is it done?
I have a long list of values, a few thousand lines, that I need to input into an array so I can run a formula on the values in the array and then take those results and put them into another array which I can then call to output down a different column. Is there a faster way to accomplish this than the typical For Loop with the activecell.value and activecell.offset commands, that just takes forever.
View 15 Replies View RelatedIm working a spredsheet for my work, it is a database of qualifications for certain employees. There are about a hundred different qualifications and about 20 different employees. And some of the qualifications overlap. I would like to input a certain date in one of the cells, and have it copy into some of the other cells where the quals overlap. But i would like to input that date into any of the cells that overlap, not just one.
View 12 Replies View Relatedhow to code to specify a cell in which to enter data into a spreadhseet, when the heading contains only one row.
In the attached example the headings contain multiple rows with merged cells, is there any way of overcoming this so that the entries are placed in the correct cells?
Is it possible to have a code of say numbers or letter assigned to an explanation of that said code which automatically appears in the next cell?
See attached spreadsheet : Auto fill next cell with predetermined answer from list.xls
i have uploaded a file.....basically i have an input of names and i want to repeat these as shown in the output..is this possible.
View 5 Replies View RelatedI got all three dropdowns to be dependent on each other, now however, whenever I change the value in the top Input Dependent Box M39, I would like M43 & M47 to appear blank. I want these two cells to appear blank until you select the dropdown which will allow you to select your values of choice.
View 2 Replies View RelatedI want to pass an array to a function, and am unclear how to do it. For example, the following declaration does not work:
Public Function xyz(a() as Variant) as Double
There is an additional requirement that I would like the output also to be a range of the same dimensions, typically one column and 100 rows. Is this possible?
A further twist is that the function I am writing calculates two values for every element in the input array and I need the output of them both.
An inelegant solution would be to write two separate functions, but I was wondering if it is possible to get two array outputs from a single function.
I am trying to write a match function to return the row of the value I search for. It is properly returning the value of the row I searched for. What I need to know is how do I get it to spit out information in the rest of the row. Here is my code so far:
Sub Rectangle2_Click()
Dim x As Long
Dim Row As Long
' Brings up input box
x = InputBox("Please Enter Tool Information", "Search")
'Exits if nothing is entered in the text box
'If x = "" Then Exit Sub
'MsgBox (SearchString)
'SearchString = x
MsgBox (x)
That gives me a Type mismatch error when I uncomment it out.
Something I was adviced of before in a situation like this way to Concatenate the columns, e.g
=A2&B2&C2&D2&E2&F2
in a far left column (insert 1 if needed).
That was supposed to be so that I can search through multiple columns. When I do that to test it, it never comes up with results. It always comes back as 0 meaning it wasn't found.
I'm working in Excel 2010. I'm trying to create a dynamic range, using the OFFSET function. I've got it working beautifully but as soon as I save it and close the Name Manager the range stops working. When I go back into Name Manager I find all the cell references have changed (from C1:C600 to C1048572:C595 - or some other strange range).
P.S. What it's doing isn't so important as when the cell references are right it works. But just for full info: It's an OFFSET function, starting at A1. It will look at a list of companies and use a Match function to find out how many rows to offset (based on where the first instance of a particular company. And it uses the COUNTIF to make the range the same number of rows as there are entries for that company.
Here is my broken function:
=OFFSET('Map Point'!A1048572,MATCH("Company Name",'Sheet Name'!C1048572:C595)-COUNTIF('Sheet Name'!C1048572:C595,"Company Name"),0,COUNTIF('Sheet Name'!C1048572:C595,"Company Name"))
I'm trying to use IF and AND functions to create a basic input-output system. The problem I have (more details below) is the 64 limit when the potential inputs could be infinite.
For values entered into a cell between 1 and 10, this should produce an output of 0.00 in another A value higher than 10 should output as 1.00, and from then an extra 1.00 is added for every '10' added. There is no limit on the input ie 1 = 0.00, 11 = 1.00, 29 = 2.00 and so on.
Sometime it’s so hard to explain what it is you are having problems with, specially in the little title. I'm trying to write a formula which should be very simple but isn’t . The formula is in box F10 if B10 has anything in it and its going to have a mixture of text and numbers (first text then numbers) then it’s should equal to the value in the box C7. Here is the formula I wrote that doesn’t work.
View 4 Replies View RelatedWhat I am trying to do is get the ROW 13 and ROW 18 outputs depending on inputs in ROW 2 to 5. Inputs in ROW 2 to 5 can have any value in any year. I would like to perform the calculations if the value in column U is 2 (if 1 then no action required)
I don't need ROW 10, 11, 12 separately if that is easier ...I am interested in getting the ROW 13 basically.
Have a person Input an Assembly Number and,Have Excel return a list of Part Numbers, their Descriptions, and a Quantity for each Part Number that will need to be packaged with the Assembly Number that was Input.
The output needs to be in the form of a check sheet (I can play with the formatting if I can get the information out) for the one Assembly Number input.The output can either be in a separate spreadsheet or a User Form. The spreadsheet is easier for me to work with but the User Form looks cooler.
I can use a VBA Function to Input the Assembly Number but then I need some way of searching a small table (about 20x20 cells) to find the matching Assembly Number and then return the Part Numbers, etc. to a check sheet so the parts can be packaged. Each Assembly Number can have several Part Numbers associated with it. Either unique to that Assembly Number or common to other Assembly Numbers. The Quantities can also be unique or common. A couple of simple examples might be:
Assembly Number - ANA0134
P/N Description Qty.
ANA0118 Widget thing 2
ANB0554 Thing Widget 4
Assembly Number - ANA0431
P/N Description Qty.
ANA0118 Widget thing 3
ANB0554 Thing Widget 4
ANC0023 Plain Widget 1
> When the workbook is opened I want a box to appear with a message and 4 choices (as buttons?).
> Based on the button clicked I want 1 of 4 new boxes to appear (replacing the first box) and ask for input values.
>I then want the inputs to be written to specific cells on a specified worksheets inside the workbook.
For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)
I plan to use command button " CommandButton1" on input sheet to start the calculations
Here's what I want to do after pressing the " CommandButton1" :
1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.
2.for empty cell in the input table paste 0 (zero)
3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output
4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1
5.Do this for all cases (in actual workbook there will be more than 100 cases)
I have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
I have a simple spreadsheet of an inventory. Each row on this spreadsheet represents the data related to an item. I would like for a user to be able to INPUT a serial number via a userform. Then, I would like for the program to OUTPUT some information about that particular item (a few cells that should be on the same row as the serial number).
I attached an image diagram that may better represent what I am trying to do.
I have a bit of code in sheet two of my document that requires user input to produce output. However I have the document set up in a vway that requires the actual input to be placed in a vell in sheet one, and the cell in sheet two is just "=cell in sheet one". This causes the input cell in sheet two to change but the output cell does not produce the new answer.
View 4 Replies View RelatedGot a road block on one of the trackers which I am trying to create which compares some of our agreements. Basically we need to compare current production with our contracts and then bring the tier level they are at in order to then calculate how much in overrides we receive. Belwo is an example:
Input Value = 140000
Out Should be = 1.5%
Set of Values 1
T1
T2
T3
T4
[Code]...
In a nut shell it will look for 14000 in set of values 1 and pick T3 to then go in set of values 2 and display corresponding T3 which will be 1.5% in above example as output.
It would take forever to describe the problem so I just made a sample Excel file.
View 2 Replies View RelatedI have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....