I am trying to create a logical test with three possible results:
h2 <10.2 "needs improvement"
(if false) h2=10.2 "meets standard"
if false h2>10.2 "exceeds standard"
Basically, I am referring to a cell to determine if it meets, exceeds or does not meed a specific standard. In this case 10.2.
My logical test is =IF("D2"="E2",1,2). When I autofill or copy down, the row numbers do not change to "D3"="E3", etc. How do I delineate text and also have the ability for autofill or copy to change the rows as it goes?
View 2 Replies View RelatedBasically I have a column (lets call it column A) whereby I manually fill the cells green once I have received some documents, another column which has a numeric value in it (column B) and I want to create a third column which basically just copies column B but ONLY if column A is filled with a colour (actual colour doesn't matter cause I only use green)
I tried using the IF function but I don't know how to use cell colour as the logical test
excel 2007. Here is the situation:
I am using the Index and Match function to lookup for two specific criterias in a different worksheet. So far, it is working well, but it gets complicated. I want to look for the criterias in 6 different worksheets based on what a certain column is saying. Here is an example:
A
B
C
D
[Code].....
So, if the continent is Asia in the column A, I want Excel to look in the Asia worksheet for the city and the venue and return me the contact information. Same, if the continent says Europe, I want it to look in the Europe worksheet or the city and the venue and return me the contact information. So on and so forth.
The formula I have at the moment is this:
{=INDEX('Asia'!$1:$1048576;MATCH(B3&C3;'Asia'!D:D&'Asia'!E:E;0);9)}
How do I incorporate the logical test for it to look for the proper worksheet knowing that all my continent worksheet have the same structure?
Under what conditions does a simple logical test, like
View 5 Replies View RelatedHere is the formula I am trying to write:
=IF(A21=(VLOOKUP(XX52,AN24:AN52,0,V38),V45,0)
The above is in cell X45
This does not work, but this is what I want it to do:
I have a list of text, if cell A21 equals a range in that text then I want the cell to return whatever is in Cell V45, if A21 does not equal within the range of text, then I want it to return a zero in cell X45.
You can see that I tried using Vlookup as the logical test, but I am not doing something right or vlookup cant be used that way.
I am trying to build a logical formula and it turns wrong values. I have four criteria in numbers, the codes are: 1 invoices, 3 credits, 7 Debits, 8 Returns, 9 Payments. All of these codes have positive numbers. I am trying to convert "credits", "returns", "payments" in negative . the rest "invoices" "debits" stay positive. In column A i have dollar values all positive, column B "codes" mentioned above, column C "i want to put the correct values.
View 9 Replies View RelatedI have a spreadsheet where I have a list of patients who were evaluated on a certain date unique to that patient. Some of the patients have a subsequent date of death, and some do not (they're still alive).
I need to create a logical test which indicates whether or not the patient died at specific intervals after their unique evaluation date-- at 3 months, 6 months, and 12 months. Additionally, I need to measure whether the patient died at 0-6 months, or 0-12 months, or is still alive.
In other words, if Patient A was evaluated on 1/1/2008 and subsequently died on 10/31/2008, I need to do a logical test that says 3 months = false (no death), 6 months = false (no death) and 12 months = true (death). True = 1 and False = 0 (so I can do a simple column add to figure out how many died at each interval). Additionally, for the 0-6 month test it should calculate = 0, but for the 0 - 12 month test it should calculate = 1.
I'm totally stumped as to how to do this. Currently my spreadsheet reads as follows: (I've put ** next to cells that I need formulas to calculate. If no **, assume it's a value I've inputted manually)
A1 = Patient number (numerical order)
B1 = Patient Initials
C1 = Initial Evaluation date
D1 = Date of death (if any- blank if patient is still alive)
E1 = Patient death indicator (1 = dead, 0 = alive)
F1** = Indicate whether or not patient died within 3 months of evaluation (1 = dead, 0 = alive)
G1** = Actual date of death within 3 month interval
H1** = Indicate whether or not patient died within 6 months of evaluation (1 = dead, 0 = alive)
I1** = Actual date of death within 6 month interval
J1** = Indicate whether or not patient died within 12 months of evaluation(1 = dead, 0 = alive)
K1** = Actual date of death within 12 month interval
L1** = Did patient die within 0-6 months of evaluation? (1 = dead, 0 = alive)
M1** = Actual date of death within 0-6 months
N1** = Did patient die within 0-12 months of evaluation? (1 = dead, 0 = alive)
O1** = Actual date of death within 0-12 months
I have data in column A. The data contains a name, an underscore and initial/s. For example: rebecca_rt, john_j, etc... I'm trying to pull only the characters to the right of the underscore. I played around with the below formula that I found under a similar question thread. But, it doesn't quite work. As it is now, it returns ecca_rt when I just want rt. I'm sure this is probably really close =IF(ISERROR( FIND("_",A1)),A1,RIGHT(A1,FIND("_",A1)-1))
View 3 Replies View RelatedI'm trying to create a formula that will determine the bonus (%) for sales made. Here's the table:
<10000 sales = 0% bonus
>=10000 sales but <=29999 sales = 5% bonus
>=30000 sales but <=to 44999 = 7% bonus
>50000 sales = 10% bonus
Since the sales and bonus figures are subject to change each year I'd like the formula to point to the numbers but that part seems easy if I can get the formula right.
I'm trying to use the following formula to verify if the "," is within a cell. Something is not right, because even for True conditions, I'm getting a False return. I think my True logical test is not written right.
View 3 Replies View RelatedI need a formula that will return a range of values from a list.
Example: I need a formula in cell A2 that looks at the list and will return all numbers that are >99 but 199 but299 but
I am working on a homework assignment, the books method was crap so I did my own method. I am almost done except for 1 last thing. I cannot find any function that will allow for 3 logical tests. I have a screen shot here explaining what I need to happen.
View 2 Replies View RelatedHow we represent AND OR in a function how many logical sequence can 1 if take
example =if((w4>u4 and v4=0) or (t4>r4 and s4=0);"yes";"no") can excel(2003) accept this , or there is an error in it what is error?
I have following formula that returns #value!
=IF(OR(OFFSET(LIVE_JNL,ROW(5:5),COLUMN(C:D))="",OFFSET(LIVE_JNL,ROW(5:5),
COLUMN(C:D))=0,""),OFFSET(LIVE_JNL,ROW(5:5),COLUMN(C:D)))
Where the value in the cell which is referenced is either blank or zero then blank must be returned, otherwise the value which is being referenced by the offset formula.
what was wrong with this formula, an error message comes up saying VALUE, im trying to get the formula to say that - If 2 dates are different then subtract one from the other to get a number of working days, but if the dates are both the same then to -1 from the value as for some reason the value is coming back as 2 when it should be 0?
=IF(OR(M17>0,N17>0),NETWORKDAYS(M17,N17,holidays)+1+Q17,IF(OR(M17=N17),NETWORKDAYS(M17,N17,holidays)-1,0))
Basically, I'm trying to calculate a pooled z-score from z-scores already stored in different cells.
Each individual z-score are calculated like this :
D1=IF(A1=999,999,((A1-10)/3)).
They are derived from standard scores with a mean of 10 and a SD of 3. I use 999 to mark missing values and this work flawlessly for single z-score cells.That way, if A1 is a missing value (999), Excel returns a value of 999.
Now here's my problem. How do I tell Excel to ignore 999 values if I am pooling multiple z-scores together?
Let's say A1, B1 and C1 are single z-scores. I want D1 to be the pooled z-score result, but I want it to ignore A1,B1 and/or C1 if their value is 999. For instance, if A1=+2.0 , B1 = 999 and C1= -1.50, I want my D1 cell to ignore B1 in the calculation.
I've tried : D1=IF(A1,B1,C1=999,999,(LC5+LI5+IK5)/3)) but it sure doesn't work...
I am working with some data that consists of two types of messages: one containing vessel speed and another containing vessel type. Both messages share a common ship identifier number. What I'd like to do is run through column A (ship ID), check column B (ship type), and if column b has a value, to paste that value in all instances of that ship ID.
View 1 Replies View Relatedi am using the IF script, and i am also using the COUNT script in the logical part of the IF statement. i need to make sure that both K3 and V3 have a value inside of the cell in order for the statement to work, although when just K3 has a value, the IF - TRUE statement works anyway. any ideas on how to fix this? =IF(COUNT(K3,V3),SUM(K3+V3),"")
View 4 Replies View RelatedHow do I change the color of a cell as the result of a logical function?
For example: =IF(A1<A2,A1 is yellow, A2 is yellow).
I am trying to use an OR in a VBA IF statement. The condtition finds one vale but not the other. Due to the nature of the data, a value is marked either on, off, or both.
I have two seaches in the macro: one looks for on and both, and runs a sub, the other looks for off and both and runs a different sub. However I can't get the both case to run as it should.
If (Cells(i, CurCol).Value = "On") Or (Cells(i, CurCol).Value = "Both") Then
Cells(i, CurCol).Select
I have a spreadsheet wherein I've got a list of names, some of which say (See XXX) where XXX is a number. I've extracted the number to column 2. In column 3 I have another reference number. I essentially want to use column 3's numbers only if there is no value in column 2 (i.e. where there's no "See XXX in the list of names). When there is no value in column 2 I have #VALUE! - but I can't seem to use it in a logical statement. How can I do so? Or is there an easier way to pick between 2 cells?
View 4 Replies View Relatedi have problem with a long code.
So I divided that code in 4 parts.
So I have
module1 -> Sub Macro1()
module2 -> Sub Macro2()
module3 -> Sub Macro3()
module4 -> Sub Macro4()
I have declared
Option Explicit
Dim mdNextTime1 As Double
Dim myEnter As Integer
'Dim myK1 As Integer
'Dim myK2 As Integer
'Dim myK3 As Integer
Dim myK4 As Integer
Const myC As Integer = 82
Dim Lastrow As Integer
Dim myActualRow As Integer
all my sub have the following structure:
I'm trying to meet set criteria in b5 using AND the first works if both conditions are met in two cells but bur won't on one cell?
Private Sub PTIColours_Click()
If Range("b5") > 0 And Range("c5") < 0.149 Then
Range("a5").Interior.ColorIndex = 54
End If
End Sub
But this dosen't
Private Sub PTIColours_Click()
If Range("b5") > 0 And Range("b5") < 0.149 Then
Range("a5").Interior.ColorIndex = 54
End If
End Sub
I have tried searching for a good example of how to use logical operators on Mr Excel however the search is frustrated by "Small Words" in the search field ie IF, AND, NOT ,OR are too short to search.
why the following code within a macro does not work
Cells(x,11).Value = If(Or(Cells(x,136)="", Cells(x,134)="","",Cells(x,136)-Cells(x,134))
In column N I have a list of dates. In column Z I want to display either "Yes" where the date in column N has already passed or "No" if the date in column N has not passed. The formula I'm using in column Z is =IF(N2<TODAY(),"Y","N") however it just gives me "No" on every row regardless of whether date is passed or not.
View 11 Replies View RelatedI need a solution for this situtaion! Iam using a french version of excel2003!
I have #DIV/0! in P24 (i.e an error value) So I need to check in Q24 such that if (P24=#DIV/0!,0,P24). I need to have a logical formula for this one!
I inserted the following logical tests for cells E5 and E6. I saved the workbook with SE(B) in cell G3.
View 3 Replies View Relatedi had a query regarding a report i have to provide daily. i want the result to be in the form of a number which i pick up from another file.
now there are three colums in this file. one shows the date (i.e. in the ddmmyyyy format, e.g. 5/11/2008). another shows a region (e.g. SOUTHD) and the third shows a number (e.g. 445) of which i have to count how many instances occur for a particular day.
Hence for any given cell in which i would place this formula, i would need the number of times the number 445 occurred from the third column provided the date from the date column was, say, 5th November 2008 and the region was showing as SOUTHD.
pretty sure the COUNTIF function can be used to make such a formula when combined with some logical functions but am unsure on how to do so.
How to find whether a particular cell is blank or is text in a given row/column?
To elaborate more, I have some data in a row:
A B C D E
15 N 16 17 18
I am using a below formula to find whether there is any text in the row
ISTEXT(row(A1:E1)) but I am getting result as False.
