Macro To Compare Column And Return OK Or CHECK
Apr 28, 2013
I have 2 sheet
1-"Check Employee Hours"
2-"Check Hours"
Below is what Check Employee Hours looks like
Below is what Check Hours looks like
I want to the user to press ebutton i.e Sunday and macro does the comparison.
Process
I would like macro to look at sheet "Check Hours" column "E" (cell E4) and compare it against the sheet "Check Employee Hours" column "E" (cell E7). If the hours matches i would like to say OK on sheet "Check Hours" cell E4, if it doesn't match then say CHECK.
View 9 Replies
ADVERTISEMENT
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Mar 5, 2014
I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
View 14 Replies
View Related
Aug 7, 2008
I have two separate workbooks, each with a great deal of information, such as name, ssn, dates, statuses, etc. I would like to compare the SSN column for both workbooks, and when it finds a match (which there would be many) to copy the MOS cell from the same row to the other workbook. Here is my breakdown with names:
Workbook 1: Macros.xls
Workbook 2: MASS 162.xls
The SSN column is column C in both workbooks
When there is a match found between the SSN column in Macros.xls and the SSN column in MASS 162.xls, I need to copy the MOS cell (column E) from the MACROS.xls workbook to the MASS 162.xls workbook into the same row, but in column M, which is currently empty.
View 7 Replies
View Related
Feb 21, 2014
I am trying to create a macro that will compare several un-formatted workbooks and copy just what I want to a workbook of my one.
I start by having 2 different workbooks opened ("Main" and "Change") side by side like this: 1.jpg
Then i run the macro in my "Main" workbook and it should appear an Userform like it showed in the image below: 2.jpg
This is so that i can manually fill the user form with the correct columns by looking at the excel file, for example:
Ref=E3;City=G3; Data=I3.
Pressing Ok, it fill the "Main" workbook with the matching information so it and closes the "Change" workbook.
At the moment my code is in this stage:
VB:
Private Sub CommandButton1_Click()
myfile = "C:Userssst1brgDesktopRelatorios" & TextBox1.Value
Application.Workbooks.Open Filename:=myfile
Windows.Arrange ArrangeStyle:=xlVertical
[Code] .....
But I am stuck because there isn't any error and nothing happens.
View 1 Replies
View Related
Jul 12, 2014
I've created a macro that will compare 2 columns and move the rows around (whilst maintaining the original order) to line matches up and leave spaces for mismatches. In the file attached if you run the macro "RouteCompare" on the "Selection1" tab it works fine as there is only a small number of rows.
When i try it on "Selection2" tab with over 2K rows it bombs out. IT seems to only work for columns that are only slightly mismatched or not that long.
I'm not an expert on it, but i thought it might be excel using up all the resorces it has and grinding to a halt.
Is there any way to edit the macro to allow reset whatever is slowing it wodn after a period of time, or changing the macro to prevent it from crashing on long flows?
Here is the code I'm using:
Sub CompareMyRoute()
'Macro to compare flows
'Created by by Brendan M Murphy
Application.ScreenUpdating = False
[Code ...........
View 5 Replies
View Related
Feb 7, 2014
I have some code here that I am using to find matches in Column D and then remove colored cell once the match is found. I am in putting the data line by line from a Barcode scanner and only want to run the macro if the date in Column A is today. Here is the code I am using.
[Code] .....
View 14 Replies
View Related
Oct 13, 2006
I have a requirement where i need to check whether a value is entered in cells within a collumn and if so, it would set a default value to a cell on the same row but with a different collumn. this needs to occur on the run.
there are columns that i need to check and change the status column cell in accordance.
column client_name
clumn date
column start_time
column end_time
column status
first the macro is to check whether there is a client_name, if a value exist (example, smoth, doe, allen) it would set a default value to the status column on the same row as deviation (options are served, queued, deviation).
then it would check if the date & time columns have value and is less than current date time, it would change the status cell to queued.
i know that there are several nested checks (if then if then if then) the problem is that vba is not one of the languages that i master hence im totally lost here.
i can add the finalizing features and rollout the spreadsheet.
and one more thing. i have multiple sheets with the same layout where these checks and changes need to be performed
View 8 Replies
View Related
Dec 13, 2012
I have multiple colums that I want to compare (A=F), (B=G)........
I want to see the difference of the two as shown in Blue column (example file is attached.)
Skærmbillede 2012-12-13 kl. 18.37.15.jpg
View 2 Replies
View Related
Jun 5, 2008
I have 24 cells I want to compare to another 24 cells. I want to compare cell G5, 7, 9, 11, 12, 13, 15, 20, 22, 24, 26, 28, 30, 35, 37, 39, 41, 43, 45, 50, 52, 54, 56, 58, 60 with cell K5, 7, 9, etc. Cell G5 has to be compared to K5, G7 with K7 and so on. All the cells consist of is 1, X or 2. I want excel to count the number of matches and write it in cell G63.
But since I am a total noob when it comes to excel I have no idea how to do it.
View 9 Replies
View Related
Aug 22, 2008
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
Where 0.05 selected it computes for cell C63:
=IF( COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!N55>'WORKSHEET4'!L55,"YES","NO")
then cell D63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!AC55>'WORKSHEET4'!AA55,"YES","NO")
and so on
Then if 0.01 selected it would compute for Cell C63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!N55>'WORKSHEET4'!K55,"YES","NO")
then cell D63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!AC55>'WORKSHEET4'!Z55,"YES","NO")
View 6 Replies
View Related
Nov 27, 2009
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
View 9 Replies
View Related
Sep 13, 2013
I have a workbook that has 2 sheets. The main sheet is titled Data, and the second sheet is titled Archive.
I need a macro that will let me search all of Column A on Sheet2(Archive) and copy all rows whose Column A contains the value I input into Sheet1 B19, and paste it on Sheet1(Data) starting in cell A21. It can replace any information already on those rows on Sheet1 and I want to copy the information from Sheet2 not cut it.
This part isn't necessary but would be great, on Sheet2 in column D there is a Date it would be great to have another macro that would let me pull the same information as above but only pull a certain number of rows starting with the most recent dates.
View 2 Replies
View Related
Mar 13, 2007
Im trying to write a marco that will look in colum E and find criteria "a", then offset (2,1) and copy the activecell and the one below it to a1:a2, then return to where it was and offset (0,1) and then copy the active cell and the one below it to a4:a5.
after this is accomplished i need it to return to column E and start the process again for "critera b" paste the result to a7:a8 and a10:a11
I know folks usally post examples of the there code for other to take a peek at however I only know bits and pieces of the process and im not sure how to tie it all together...I was hoping someone could help me get a good start....thanks
View 9 Replies
View Related
Jun 17, 2014
I am looking formula for below condition
1.Check Column A1 should not contain "$"
2.if Column A1 don't have "$" means then look Column A2 contains "$", if True means return string as "PASS"
View 1 Replies
View Related
Aug 4, 2006
I have two columns with the same data type (text) and I want to compare one column to another and if they match, return the data from another column.
For example: I have 2 columns of names on separate Excel files. One file contains name and phone numbers, while the other doesn't. I want to compare the names from file one with file two and if the names match, return the corresponding phone number in a new column.
I've tried VLOOKUP and IF statements, but I can't get it to come out.
View 4 Replies
View Related
Jun 1, 2007
I have a sheet with 2 big columns (3000 each). I want to search each element from the first column in the second column and put a message "Yes" if it is and "No" if it isn't, at the same position in the third column. How can i do that? I want to use the sheet for more than 3000 lines (about 5000). I attached an example.
View 9 Replies
View Related
Jul 28, 2006
I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
View 6 Replies
View Related
Dec 5, 2008
What formula do I need for the cells in column F to show the name of the cheapest supplier ... for example the cheapest (£17,820) in line 2 is supplier A ????
View 5 Replies
View Related
Jan 19, 2010
if there is a way to find duplicate items in a list and return a value, if a duplicate exists.
Basically I have 19 buildings each with a separate bill of quantities. I'm looking to compare and compile a comprehensive list. So that duplicate items in different buildings can be compared side by side.
I have attached a sample of what I am trying to do.
View 11 Replies
View Related
Nov 27, 2012
I'll quote the example straight away.
Col A Col B
A,S,F A,S
A,R,S A,R,S,T and so on.
There is no fixed pattern for the values, but they are separated by commas only. All i need is to compare col A and col B and return me the value in Col C like this,
Col C (col C is to know the removed value from comparison)
F (for line 1)
Col D (to find the letters that are added from comparison)
T (for line 2)
View 7 Replies
View Related
Jul 4, 2013
I have 2 columns of usernames A and B, A has approx 700 usernames and B has about 80. In column C I have a list of names 1 for each username in column A. I want to compare the B with A and if there is a match return the value in C and place it in D.
View 3 Replies
View Related
Sep 25, 2013
I have two columns of values and I want to compare them and return differing values. So I named the ranges "A" and "B" so if your in B but not in A I want that value in C.
I started with a vlookup but that doesn't seem appropriate to the way I was using it.
=VLOOKUP(B, A, A, FALSE)
Is there a function better for this.
View 1 Replies
View Related
Jun 4, 2007
I'm trying to compare cells in two spreadsheets and return a value to another cell in one of those spreadsheets.
SPREADSHEET_1
Column A - NAME (Contains Data)
Column B - AREA (Contains Data)
Column C - PLAN (Contains Data)
SPREADSHEET_2
Column A - AREA (Contains Data)
Column B - NAME (EMPTY)
Column C - PLAN (EMPTY)
I need to compare Spreadsheet_1 - Column B to Spreadsheet_2 - Column A and then fill in the cells in spreadsheet_2 with the values from spreadsheet_1 column A and column C.
View 9 Replies
View Related
Nov 22, 2006
I have a list of two rows of over 20,000 items. I would like to know what data has been added to the second row from the first row and what has been removed.
View 4 Replies
View Related
Mar 17, 2007
I have two spreadsheets that I have to compare three columns in each to each other and find the difference between them. And I'm not sure how to do this.
I have attached a sample file to show what I'm looking at.
Basicly I need to know the differences between each spreadsheet based on zips. Each zip is assigned to a store and group and the "data" spreadsheet is the master. I need to compare the "system" spreadsheet and have it show me what is different based on each zip.
View 9 Replies
View Related
Nov 25, 2007
i have a list in column "a" in sheet 1 and a list in sheet 2 column "b" range from row 1 to 50
i would kike to get the data from sheet1 that is not in sheet 2 and copy it in to sheet 3
View 6 Replies
View Related
Aug 12, 2008
I have two columns, one with the target text (D:D) and one with text I want to compare it too (A:A). If the text in column (D:D) matches the one in (A:A), I want to return the value in (B:B). I attached a sample of the problem i'm dealing with.
View 5 Replies
View Related
May 5, 2008
I have a table that has 6 columns and 5 rows. I need to check a name (division) against the column heading, then and return a classification from the first column based on the score.
Below is an example of what I am using (I'm not sure how to post a screen shot):
DIV1 DIV2DIV3DIV4DIV5
A91.7689.4198.82100.82102.35
B111.43108.57120.00122.00124.29
C141.82138.18152.73154.73158.18
D195.00190.00210.00212.00217.50
E195.10190.10210.10212.10217.60
DivisionDIV3
Total Score 155.6
ClassificationC
View 9 Replies
View Related
Dec 19, 2013
Basically I have a string of dates, I want to get the max of the values that are before a specific date and return the header. Look at the file I provide for better understanding.
View 2 Replies
View Related
