I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
View 14 Replies
I have 2 columns of usernames A and B, A has approx 700 usernames and B has about 80. In column C I have a list of names 1 for each username in column A. I want to compare the B with A and if there is a match return the value in C and place it in D.
View 3 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have column A of 700 usernames and column b with 85, I want to compare b with a and if appears in the list place a 1 in column C
View 1 Replies View Related[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
I have a file with multiple column headers and data entries (dropdowns) into the rows. I wanted to create a secondary sheet...like a pivot table..if the vertical and the horizontal are both in the two columns selected it returns a value in the table.
I would use a pivot table, but it is a data entry sheet and the pivot table does not bring up all the horizontal and vertical values unless they have already been selected in the sheet.
I have 2 sheets with thousands of clients. One has client contact information and one revenue. I was able to put the 4 columns on 1 sheet. I need a formula that will say if the value of the client name columns match, (Client name) then return the value in the third column (revenue).
One other question, b/c i copied from a pivot table, i have the client name and their email address below in a separate row. Ideally i would have the client their contact and their revenue in 3 columns next to each other. Is there an easy way to bulk move the email address from the row below the column to the column next to the client name?
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I need to compare names in column A(sheet 1) to names in column A(sheet2) and if there is a match then I need the date from column B(sheet 2) to be copied to column B(sheet1).
Example of the sheets:
Sheet 1:
Name
Food Safety
Smith,John
Walker,James
Stratton,William
Sheet 2:
Name
Food Safety
Christian, Marie
03/03/1994
Harker, Stuart
01/06/1995
Walker, James
05/06/1997
I have a list of names on 2 separate sheets that I need to modify. If I have a name on sheet1 matches a name on sheet2 I would Like to add a "space" then "(SV1) at the end of the text string on sheet2. I have a list of 1500 and will only have to modify 75-100. Example shows on sheet2 how I would like the desired outcome to be.
View 3 Replies View RelatedI have two columns with the same data type (text) and I want to compare one column to another and if they match, return the data from another column.
For example: I have 2 columns of names on separate Excel files. One file contains name and phone numbers, while the other doesn't. I want to compare the names from file one with file two and if the names match, return the corresponding phone number in a new column.
I've tried VLOOKUP and IF statements, but I can't get it to come out.
I have a sheet with 2 big columns (3000 each). I want to search each element from the first column in the second column and put a message "Yes" if it is and "No" if it isn't, at the same position in the third column. How can i do that? I want to use the sheet for more than 3000 lines (about 5000). I attached an example.
View 9 Replies View RelatedI would like a macro that can match column A & column B data of Worksheet(WeeklyJob) to column A & column B of Worksheet(Master) then if match is found copy column C through column F into Worksheet(Master) column C through F (and overwrite any [outdated] existing data there may be in those columns [thus updating the job's weekly charges, etc.]).
If match is not found I would like it to copy entire row from Worksheet(WeeklyJobs) into first blank row at end of Worksheet(Master) (thus giving me a new record of a new job from the weekly report).
All the columns in both worksheets are labeled the same (& row 1 is headings).
I have 2 workbooks each with last name columns. One book has a column of a few hundred names and the other has a column of over a thousand. I need to compare the last names and pull out the employeeID (which is in a seperate column) to a specific column for the ones that match.
View 2 Replies View RelatedTrying to compare data from two spread sheets, if there is similar data in column a, output all data (sheet1 & 2) to the 3rd sheet.
Sheet1
a b c d
smith john 888 cicero
king larry 123 syracuse
Sheet2
a b c d
smith marge 777 liverpool
king mike 458 dewitt
Sheet3
a b c d a b c d
smith john 888 cicero smith marge 777 liverpool
king larry 123 syracuse king mike 458 dewitt
The closest thing I can find to what I'm trying to accomplish is this link here:
Compare Worksheets
I'm also would like the ability to change the columns I am comparing. The actual sheets may have more that 4 columns.I can somewhat read the formulas but have a hard time under standing them completely.
I have two columns of values and I want to compare them and return differing values. So I named the ranges "A" and "B" so if your in B but not in A I want that value in C.
I started with a vlookup but that doesn't seem appropriate to the way I was using it.
=VLOOKUP(B, A, A, FALSE)
Is there a function better for this.
I have two columns, one with the target text (D:D) and one with text I want to compare it too (A:A). If the text in column (D:D) matches the one in (A:A), I want to return the value in (B:B). I attached a sample of the problem i'm dealing with.
View 5 Replies View RelatedI have used the merge facility to incoporate all the worksheets into one excel files. As they all have same heading, I have sorted the data, first by their account expiry time (oldest to newest) and then by manager (A-Z)
For example, system report generated on 15/03/2013, 28/03/2013, 03/04/2013, 15/05/2013, 28/05/2013 and so on and these are sheet names too. What I want is one worksheet called report with the same heading as my merged worksheets and return values where Column C in 28/03/2013 is compared to 15/03/2013 and if the employee ID matches than return the whole row of data for the report.
the next query would then be for finding employee ID in 03/04/2013 and comparing it with 28/03/2013 worksheet and returning the matched ID in report worksheet.
This is the layout of the report worksheet.
Display NameEmployee IDAccount StatusE-mailDepartmentManagerComment
15/03/2013 to 28/03/2013
28/03/2013 to 03/04/2013
03/04/2013 to 15/05/2013
15/05/2013 to 28/05/2013
so for the above report worksheet, if employee id matches the two compared worksheet (15/03/2013 to 28/03/2013) return all value (Display name, employee id, account status, email, department, manager, comment) from the 28/03/2013 and so on.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
I have a spreadsheet with three years worth of data for a property I manage. Each column has cost data for the year and the specific department/cost for that year as the row value.
I have a column between the years that calculates the percent of gross revenue for the specific department/cost.
I would like to find (or create) a formula that will compare the percentage (or specific cost) for the three years within the specific row and if the increase year over year over year exceeds a trigger value it returns something (check me out/true/false) whatever.
The cost items for the property are in the hundreds so I'm trying to come up with a way to quickly see what specific cost items are going up (or down) more rapidly then what would be considered normal.
I've got two worksheets ("June" & "July"). On both worksheets, column A is comprised of ID numbers and column B contains dollar amounts. I need to compare the ID numbers in Column A on each worksheet, and if they match I want to copy the ID number and the amount to a third worksheet ("Results").
View 3 Replies View RelatedI am trying to create a macro that will compare several un-formatted workbooks and copy just what I want to a workbook of my one.
I start by having 2 different workbooks opened ("Main" and "Change") side by side like this: 1.jpg
Then i run the macro in my "Main" workbook and it should appear an Userform like it showed in the image below: 2.jpg
This is so that i can manually fill the user form with the correct columns by looking at the excel file, for example:
Ref=E3;City=G3; Data=I3.
Pressing Ok, it fill the "Main" workbook with the matching information so it and closes the "Change" workbook.
At the moment my code is in this stage:
VB:
Private Sub CommandButton1_Click()
myfile = "C:Userssst1brgDesktopRelatorios" & TextBox1.Value
Application.Workbooks.Open Filename:=myfile
Windows.Arrange ArrangeStyle:=xlVertical
[Code] .....
But I am stuck because there isn't any error and nothing happens.
If i has this table name delivery
Table name is delivery and goes from a to p and 1 to 621.
1. i am comparing text
2. i have >100 countries, and with vlookup i have to type every single one, and this is what i want to escape (mb i need to refer to an array, or string, or no idea)
3. mb a solution could be sth with index, or match, i just tried it, copying some similar formula from www, but it didn't match the countries, and return the value respective for that country.
E.g. I have China in col1 (1st file), #employees 10 in col2 (1st file), and China in Col 1 in 2nd file. So, a formula should match China & China from both files, and return 10 as number of employees.
I have 2 sheet
1-"Check Employee Hours"
2-"Check Hours"
Below is what Check Employee Hours looks like
Below is what Check Hours looks like
I want to the user to press ebutton i.e Sunday and macro does the comparison.
Process
I would like macro to look at sheet "Check Hours" column "E" (cell E4) and compare it against the sheet "Check Employee Hours" column "E" (cell E7). If the hours matches i would like to say OK on sheet "Check Hours" cell E4, if it doesn't match then say CHECK.
I have two separate workbooks, each with a great deal of information, such as name, ssn, dates, statuses, etc. I would like to compare the SSN column for both workbooks, and when it finds a match (which there would be many) to copy the MOS cell from the same row to the other workbook. Here is my breakdown with names:
Workbook 1: Macros.xls
Workbook 2: MASS 162.xls
The SSN column is column C in both workbooks
When there is a match found between the SSN column in Macros.xls and the SSN column in MASS 162.xls, I need to copy the MOS cell (column E) from the MACROS.xls workbook to the MASS 162.xls workbook into the same row, but in column M, which is currently empty.
Basically, i have a workbook that contains 2 worksheets with stock data for two stock holding sites, we're consolidating our stores and need to confirm what stock is held at both sites. I need to compare column C on both sheets to find if an item exists on both sheets, and if so copy the entire row from Sheet 2 onto the next free row on a new sheet. Col C on each sheet contains the stock number, however, on Sheet 1 the stock number is abbreviated ot the final 7 letters, with Sheet 2 showing the FULL stock code.
I need whatever is in "Sheet 1:Col C" (for example '1234567') to be compared to whatever is in "Sheet 2:Col C", and if a match is made (for example 9999-00-1234567) then the row containing the match be copied to the next free row on Sheet 3.
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedI'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
