Lookup Transposed Table
Nov 28, 2006
I have generated a report from my system that shows which customer bought which item # and its qty. There are approx. at least 500 item/customer to go though, is it possible for me to do vlookup or other formula into sheet 2 that will show the qty # for each customer? (pix #1 into pix #2- possible?)
Pix #1:
http://img176.imageshack.us/img176/2606/01km1.jpg
into this table...
Pix #2:
http://img140.imageshack.us/img140/6250/02ah1.jpg
- If I need to attach my working file.
View 8 Replies
ADVERTISEMENT
Jan 4, 2009
I am using Autosum on cells in a COLUMN on sheet-1 to pull values from cells in a ROW on sheet-2. This is a tedious task as the sheet is huge.
The formula remains basically the same throughout with only the row numbers changing. The autosum cells are vertical referencing cells that are horizontal.
For instance,
Sheet-1 A1 would reference " =SUM(Sheet-2!C34)", Sheet-1 A2 would reference " =SUM(Sheet-2!F34)" etc.
Sheet-1 B1 would reference " =SUM(Sheet-2!C63)", Sheet-1 B2 would reference " =SUM(Sheet-2!F63)" etc.
In each case,
all cells in a particular column in sheet-1 references a particular row in sheet-2.
all cells in a particular row in sheet-1 references a particular column in sheet-2. - I hope this all makes sense to you.
Sheet-1 is already built and cannot be changed.
I cannot copy - paste special, transpose because the number of rows/cells differ between the two sheets.
I cannot copy/paste cells from one column to another in sheet-1 because excel , in its wisdom, recalculates the reference.
For instance,
copy Sheet-1 A1:A22 (=SUM(Sheet-2!C34)) and paste to Sheet-1 B1:B22 the formula would change to " =SUM(Sheet-2!H34)" so now I still have to edit H34 to become F63.
I would like to copy the formula exactly as is without it reformating itself. This would keep all of the columns in place and I could then do a replace on the row numbers.
Is there any way to copy formulas from one cell to another without them changing. I tried paste special, paste formulas but that did not work.
View 10 Replies
View Related
Sep 17, 2008
I have a VBA subroutine that builds a list of dates in an array and then copies this to the worksheet using worksheetfunction.transpose. The array is two dimensional and therefore uses the variant data type.
This works fine in Excel 2002. In Excel 2003 the array is fine until the Transpose function is used, at this point they are changed from dd/mm/yyyy to mm/dd/yyyy. This means that some dates are changed (eg: 01/Mar/2008 becomes 03/Jan/2008) and some are written as strings (eg: 17/Mar/2008 becomes the string "17/03/2008" and cannot be operated on as a date).
I'm aware that there was a hotfix to deal with a similar issue regarding recalculation but this is on Excel 2003 SP3 which should already have that hotfix in place.
I have reduced my code down to a basic demonstration showing the problem. This assumes the worksheet contains some dates in "A2:A32". I have also attached the workbook containing this code.
VB:
Private Sub CommandButton1_Click()
Dim a() As Variant, c As Integer
Redim a(1 To 31)
For c = 1 To 31
a(c) = Cells(1 + c, 1)
Next c
Range("D2:D32") = WorksheetFunction.Transpose(a)
End Sub
I have fixed this problem by looping through each element of the array and writing them individually in to cells but this is far slower so I'd like to know if there is a better solution than that.
View 2 Replies
View Related
Jun 12, 2009
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies
View Related
Jul 29, 2008
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies
View Related
Jun 5, 2014
I'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
View 3 Replies
View Related
May 1, 2007
I need to place a lookup table in a work book and I'm not sure how to do it.Below is what I specifically need in my workbook.
c. The workbook will need a lookup table that will lookup the tuition, clothing
and entertainment figures depending on the selection of college, and will
ensure that only the colleges on the list are selectable. That is, the
worksheet will not allow the user to enter another college not in the list.
The lookup list must be on a worksheet by itself at the end of the workbook.
View 13 Replies
View Related
Aug 4, 2009
I am attempting to do a search on a 2 dimensional table, based on Product Code/Month. Is there a function, addin or a macro that will allow me to do this? All I can come up with is a messy combination of VLOOKUP/HLOOKUP/COLUMN.
View 2 Replies
View Related
Nov 23, 2011
I get a file every day that contains online orders for a client. They have made the state and country fields on the order form free text, so sometimes the State field has CA, sometimes California, sometimes even Cal or Cali. Oregon may be represented as OR, Oregon, or Ore (and one time even Orygon.)
The country field may have US, USA, United States and sometimes United States of America.
Well, they need this data imported to their system with the states fully spelled out: Oregon, California. And the country spelled out as well: United States, Canada.
Right now I have a lookup tables worksheet that I just have a macro run a vlookup on. But I'd like to know if there is a way I could just put it all in the code, without the external tables.
i.e. some code that, in English, would basically say, "If the value of any cell in column K is among these values, replace it with those values, otherwise just leave it as it is". Could I do that while containing the two sets of values right in the code rather than on a worksheet?
I really just want to replace the standard abbreviated state/country codes with the full text, and if the value does contain Cali or Ore, let them manually make the change. Hopefully that will finally nudge them to just make the online order form utilize a drop-down list of states and countries, rather than free text.
View 1 Replies
View Related
Jul 4, 2009
I have a table of this format:
d e f
a 1 2 3
b 4 5 6
c 7 8 9
Now i want to find the column title for a particular value in the table. For ex, corresponding to row 'b' and value '5', how to get 'e'??
View 3 Replies
View Related
Sep 27, 2009
I have a large set of frequency data obtained from experimental testing which is dependant on three variables - a span length (from 0-20 metres), vehicle type (divided into motorbikes, cars & trucks - small, medium & large for each) & speed (20-80 km/hr).
Given a span length, speed & particular vehicle (eg large car), I need a program/formula that calculates the equivalent vehicle type (eg in 'motorbikes' - it would correspond to 'small') based on the frequency data. The equivalent vehicle frequency would be +/- say 0.5 Hz (since one type of vehicle would not have the exact same frequency as another).
I have tried experimenting with 'vlookup' functions but it doesn't seem to yield a solution to this problem.
View 14 Replies
View Related
Aug 7, 2009
I have a spredsheet for a weight lifting contest they are using the wilks formula to give each lifter a coefficient. I have them all in a table and we usually just look them up manually. This gets us very behind with the fast paced nature of a live contest. Here is a sample of what I have a data.....
MaleBWT00.10.20.30.40.50.60.70.80.9401.33541.33111.32681.32251.31821.3141.30981.30571.30161.2975411.29341.28941.28541.28141.27751.27361.26971.26581.2621.2582421.25451.25071.2471.24331.23971.2361.23241.22891.22531.2218431.21831.21481.21131.20791.20451.20111.19781.19441.19111.1878441.18461.18131.17811.17491.17171.16861.16541.16231.15921.1562451.15311.15011.14711.14411.14111.13821.13521.13231.12941.1266461.12371.12091.11811.11531.11251.10971.1071.10421.10151.0988
FemaleBWT00.10.20.30.40.50.60.70.80.9401.49361.49151.48941.48721.48511.4831.48091.47881.47661.4745411.49361.49151.48941.48721.48511.4831.48091.47881.47661.4745421.47241.47021.46811.4661.46381.46171.45951.45741.45521.4531431.4511.44881.44671.44451.44241.44021.43811.43591.43381.4316441.42951.42731.42521.42311.42091.41881.41661.41451.41231.4102
If the lifter is male and weighs 46.2 kg her gets a coefficient of 1.1181 or female of 44 KG gets on of 1.4295
My question is how can i get this info automatically from my wilkes worksheet over to mt deadlift page?
My dead lift page looks like this.. I'm trying to fill in the wilks fields automatically by using the bodyweight field that we fill in when the guys come in to lift.
Best LiftWilkesTotalBody Weight KGBody Weight LB0#N/A#N/A0.0000.0000#N/A#N/A0.0000#N/A#N/A0.000
View 9 Replies
View Related
Oct 21, 2013
I am trying to build a formula to do a look up from pivot table. Error in the formula.
View 13 Replies
View Related
May 22, 2014
I am looking for how to find a closest match for to a a given number in a table based on looking up the value of one cell to determine what column to look in, then compare the given number to the values in the column, and then return the value in a another column of the same row it finds the match in. Ive attached an d example.
The value in B2 is the value I am trying to find a closest match to. It first must determine which column to look in, and that is dictated by cell B3. So, since R-404a is entered in B3, column J is the column it looks in, and it returns 0.21, since it is the closest match .
View 3 Replies
View Related
May 15, 2014
A b c d
100 100 x
100 y
100 z
I want to lookup 100 in colum b with a result of z instead of x in criteria c:d
View 2 Replies
View Related
Jul 28, 2014
I need to make a program to take inventory at a bakery. We do this twice a day. Our products are loaves of bread. We have white, multigrain, soy and lindseed, low gi, and gluten free.
They are in pallets, trolleys, crates, boxes, pallet rows (part of a pallet) and individual loaves (singles)
I need to find out how many loaves that we have. How do I total them up?
View 3 Replies
View Related
Feb 13, 2009
I have a problem with a table I am using I need to look up two values in a table and return the the score to the relative cell.
I have attached an example of what I need. I don't know if I can use the VLOOKUP function or would it be better to use the Index feature?
I have defined a name called 'Com' which is for the whole table in the 'Com' sheet.
On the 'Results' sheet all cells highlighted in Yellow are where values are entered and contains no formula. The Green cells are the cells where I need to amend the formula so that it is more efficient.
What I need exactly is for the formulas in C4 to C11 is to first look up the values in column A and match the value in column B that relates to column A.
For example on the 'Results' sheet, if the value in B6 equals b then the formula in C6 should then look at the table in the 'Com' sheet then match 'Com 1' and then look at the response value in column B to match the rating of 'b' and then return the value of '4' from Cell C2 on the 'Com' sheet.
View 5 Replies
View Related
Apr 7, 2009
I'm currently using a lookup table to determine programs to run on a machine, however I have 3 exceptions to this and can not get my code to work.
Currently the code looks at column D for the type, then column F for the thickness of material. It then calculates the etch time required using the rate (all shown as 1 currently) on the cal_sheet and then rounds this up to a whole number. This is then compared to a second table where the program details are listed against etch times.
View 7 Replies
View Related
Dec 5, 2008
the code for lookup value of point 1 and point2 from the table ,if i key in the no.group and type of grade.
eg.1 Group10 grade a value to be point1=75 point2=20
eg.2 Group16 grade B value to be point1=125 point2=172
View 3 Replies
View Related
Jun 23, 2013
How to do simple table lookup. I have a table showing #of colors being used for screen printing down one side and qty of shirts ordered going across the top. I would like a formula that when I enter the # of colors and the quantity of shirts it will return the correct price.
12-35
36-71
72-143
1
1.50
1.25
.90
2
2.00
1.50
1.10
3
2.75
1.75
1.30
View 2 Replies
View Related
Aug 17, 2013
I have an engineering spec table. Down 12 columns I have height in metres of a post and across the rows I have square metres with 5, 10, 15, 20 and 25 being the sizes.
The engineering spec of the post type is in the table. There are some duplication of post types so post heights of 1m, 2.1m, 2.4m, 2.7m, 3m, 3.3m and 3.6m are the same, then they change. Its a similar thing in the other column headers for 10sq.m 15sq.m etc.
I need a formula so that if the post height of 3m was chosen and the sq.metres was 15 then it would tell me the post type from the table. Or if the post height was 4.8m and sq.metres was 25 it would tell me.
The post type is an engineering code of numbers and letters with no spaces.
View 5 Replies
View Related
Oct 9, 2006
I use a vlookup function on some database to lookup some data. However the data that I wanted to lookup is actually on the third row. In my attached sample, I have some data in "source data" worksheet. Another worksheet "Ratio" is where I keep the lookup value. In this sample, I actually wanted to lookup the ratio of 0.7 for Geogetown. And 0.66 for Queenstown. Could the vlookup formula be modified or need some vba code to achieve this?
View 5 Replies
View Related
Dec 21, 2006
In my enclosed attachment, you will see my dilemma. I have a list sort based on the cell value, but when two values are the same, it shows the first alphabetical listing twice when I INDEX. I can go into the individual cell and correct it, but how can I apply the formula to all the cells so no matter the matching values, I always get name A and B, rather than two A's, for example?
View 3 Replies
View Related
May 17, 2013
I have attached a demo spreadsheet to define the problem.
I wish to populate column K (Risk Rating) with data retrieved from the table, based on the corresponding information from Columns I & J.
e.g. I5 + J5 = Short term illness or injury + Unlikely. This corresponds to cell E9 (11) in the table so required response in K5 would be 11.
Help Book1.xlsx
View 1 Replies
View Related
Apr 25, 2014
My aim is to return a value from a table (Price of models) using a two way lookup method.
E.g. The code is CA45-AI, I'm looking for a formula to match the first 2 letters 'CA' to the TYPE RANGE (cell range) so excel knows to return a value from the CA row.. then, match the number '45' (from the CA45-AI (cell b3), so in the end.. excel returns the value (price) '90'.
Another example, Cell B5 is RA34-AI, so excel should return a value of 80 from the Price Of Models (cell range).
View 6 Replies
View Related
May 26, 2014
I am creating, essentially, a product order form (actually a shopping list creator for my wife). Containing 'Quantity', 'Product Name' and 'Price'. When I enter the product name via a drop-down list, the price is displayed using vlookup.... no problem so far.
My problem is... or should I say, my desire is, that when the vlookup price is displayed, if I (my spouse) know the current price to be different from the one retrieved from the lookup table, I would like to post the new price and modify the data in the lookup table so that any future requests for that item will reflect the new price.
View 8 Replies
View Related
Jun 12, 2014
I make budgets that have line items that have standard price based on 2 factors: a description, and a number. I want to keep these items in 2 different cells. I also have different clients, and the costs are different. I could simplify so that I can use a VLOOKUP with HLOOKUP and separate the clients but I would prefer not to.
Screen shot 2014-06-12 at 12.36.47 PM.png
View 1 Replies
View Related
Jun 6, 2009
I need a lookup table. I have a table that shows what the sun is doing for each day of the year. Now I need to input longitude and time zone, add or subtract if the sun is fast or slow on that day
I need it to work off one formula not make 365 copies
View 2 Replies
View Related
Dec 11, 2009
I have a table which contains information about stock, item description, price, barcode, stock qty etc.
I have used lookups to make an invoice so I can sell the product and print a receipt etc. I want to be able to take away the amount sold off the specific product that was found using the barcode and a lookup and take that amount from the stock qty column in the lookup table.
Is there a way in which this can be done? If so how?
I have included an example of the invoice and the lookup table that I want the stock to be taken from.
View 10 Replies
View Related
Aug 3, 2013
How do I lookup a table , eg. E4:G16 to see if that table contains a data.
I tried {=search(A4,E4:G16)} where A4 is in cell F10 but returns Value error.
View 1 Replies
View Related
