I have 2 reports with the same column headings. I want Excel to compare each one on the common OrderID and then just show me the ones that don't match--either one invoice can't be found on the other, or in the cases where they are found, the invoice amounts do not match (IOW create an exception report).
View 2 RepliesI am trying to create a project on excel in which there exists four worksheets. I deleted "class 2-4" due to file size but are very similar. My question here is i need a macro to located the number from the "current" column in the Manual Input section in the "Main Page" worksheet. The current number must match column A into the appropriate sheet (depending on class) and then look for the volume in row 5 and then round up to the nearest number. My goal is to input the "proposed" number into the appropriate column and row. This will be done for four different classes. My goal is to develop this table so that i can look for trends.
Eventaully i would like to concatenate multiple proposed values for each cell as the macro will need to add onto what is located in the cell should the value already exist. Code must be a module so it runs when ever data is entered in the current, proposed, and volume cells in the manual input.
I have a spreadheet which requires data from another spreadsheet. Spreadsheet 1 is only project numbers, spreadsheet 2 has all the customer data in it. I have used a 'vlookup' function to find the project number and copy the appropriate information over. The problem I have is the projects are a 6 number format (eg 531300) in both spreadsheets. In the sheet I want to complete, the project numbers only match the first 4 numbers, as they are seperated into sub-projects. Therefore the data in the data spreadsheet will only have a row for 531300, yet the one I fill in might have rows 531300, 531301, 531302 etc. Is there a way to run the 'vlookup' and only match the first 4 numbers. The current formula I have in the first cell is as follows: =VLOOKUP(A4,'[Project Database_Updated 04-30-08.xls]Sheet1'!$A$1:$E$1007,2,FALSE)
View 3 Replies View RelatedI have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies View Relatedwhen I run macro get an error
The code will go through each line of data checking to see if it can find a match. If not, the cells will be highlighted yellow. It checks from both sides, first checks sheet 1 compared to sheet 2, then sheet 2 compared to sheet 1. That should encompass the variations between the 2 sheets.
I'm using two workbooks and looking to see if two columns match, then value in the cell should be the corresponding value of that cell.
For example:
I'm using
If(Match(A2,"name of other workbook",0, I want the value in column F of row 2, "not in raw data")
But it keeps saying too many arguments.
I have 2 workbooks each with last name columns. One book has a column of a few hundred names and the other has a column of over a thousand. I need to compare the last names and pull out the employeeID (which is in a seperate column) to a specific column for the ones that match.
View 2 Replies View Relatedhow does the formula change when i want a new column to "bring in" ( lookup?) a corresponding value from the second sheet when it sees that the names match?
For instance:
sheet1
FIRST LAST HEIGHT1
John Smith 5'9
sheet2
FIRST LAST HEIGHT2
John Smith 5'11
So, the conditional format would be a 4th column in the first sheet-- still comparing the first & last names-- but when they match it enters "HEIGHT2" into this 4th column.
This is still a conditional format, right? sorry if it doesn't belong here
i did find a thread concerning my question but the topic was closed & the OPs best answer had been edited & removed for some reason...
i'm comparing annual pro sports stats for a project & want to do a vlookup contingent on pairs of columns matching between two sheets. ie if a first AND last name in one sheet match a first and last name in a second sheet then fill in x statistic. i dont know VB or anything, but i assume this can be done w/ a pretty simple formula
attached small example
I'm working on budgets (salaries). I have one main spreadsheet with all employee names listed - other spreadsheets are for each department. I need to bring the total salary from the department spreadsheets and would like to do this by looking up (or matching?) the names in the column from the main sheet to the department sheets and then putting the salary from the department spreadsheet to the main spreadsheet. In addition, I have several that have their salary split between two or more departments. On my department spreadsheet I have a column labeled % of salary for this department. On the main spreadsheet, I want to figure out a formula that will sum the percentages for a certain person (so I make sure I don't go over 100%).
For example - Joe Smith's name is on the main employee spreadsheet. He is also listed on 3 other department spreadsheets, with % of salary listed as 30% for department 1, 30% for department 2, and 40% for department 3. On the main spreadsheet I need to add up Joe's percentages from the department spreadsheets.
I have data like this:
Code:
500a
TRUE470b
440c
TRUE410d
TRUE380e
350f
[Code]...
and I want to look up an approximate value in Col2, say 310, and return it's next-highest friend from Col3, in this case "g". This is easy enough with INDEX and MATCH. But I want to take it one step further and only use those values which are approved by Col1 - so in this case I want 310 to ACTUALLY return "e"
I found some good information here which gets me close. The following works very well. It uses a boolean & operator to match two values at once, but it only works for exact matches. This example goes down the list and finds the first "sydney" which has an "x" and gives the result "h".
Code:
xmelbournea
sydneyb
xadelaidec
xmelbourned
sydneye
[Code]....
When I use this approach on data like in my first example it falls over, my guess is because the boolean & falls down before the MATCH function has a chance to accept an approximate match.
I want to search (sheet2 column A and B )for a match of (cell A2 and B1 of sheet2) and return value into sheet2 cell B2 Completed and if not found Outstanding
sheet1
A john
B Week 1
sheet2
A2 john
B1 Week 1
sheet2
B2 Completed
Here is a formula I had been using in a google spreadsheet but does not work in excel
=Iferror(If(Filter('DATABASE'!$C:$D;'DATABASE'!$C:$C=SPREADSHEET!$A2;'DATABASE'!$D:$D=SPREADSHEET!G$1)>1;"Completed";"Outstanding");"Outstanding")
Please see the attached example of my problem. I have TIME in column A in minutes and % in Column B. What I would like to do is search the % column against the value inputed into E2 (in the example 52%) and find the corresponding TIME value (Col A). However, where there is no exact match of the E2 value I would like to select the next greater value. For example as there is no 55% in my example the formula would move on to 57.27% and record 21 in D2.
View 9 Replies View RelatedI'm using an index array formula I learned here to lookup a value between 2 sheets in a workbook. I have had no trouble using it when matching just 2 pieces of information (first & last name), but now I need to make 3+ matches to get the value & the formula is no longer working.
When I check "show calculation steps" in the attached example, I can actually see that all 4 items have successfully matched across the 2 sheets but for some reason the formula is still not pulling in the desired value. Am I wrong to think that I can match more than 2 items w/ this kind of a formula?
I am trying to match a person's name in the A column (A3) with particular course requirements in Columns B through to BB (ie. B2). Not every person will have taken every course. I have the master list of data on another worksheet with 4 columns of data: A-Student Name, B-Course Name, C-Final Mark, D-Additional Notes.
What I would like to do is have Excel find the student name on sheet one as well as each of the courses listed from B-BB and check sheet two (master data) to find if the student name and course name appear on the same line. If it does I want it to return the value in column C (the final Mark).
I thought that I could do this with VLOOKUP but it only works with the left most column correct? I saw something about a VLOOKUP2 but couldn't find that option in Excel 2007.
I am trying to do a (what I thought was a) simple lookup involving 2 columns.
Pls see attached example. I am trying to find the "?" values, by matching column A&B of the input to the Data columns and returning the $$$ column.
I thought this wouldve been a piece of cake but its got me stumped!
I have two sets of data and each set consists of two columns as in the example. The first column is the X value and the second set is the Y value. The X values of each set are similar but not the same. I need to multiply the Y values of the two sets with same X value.
I need a formula for left coulmn lookup (using index and matching function) and lookup array has duplicate value.
View 1 Replies View RelatedIm trying to cross match two cells from two combobox's,
Allong the top there are test names, and down the side is staff names,
On a user form there are two combobox's one with staff names the other test names
Untitled.jpg
How can i make it increase the number in a cell where the name and test match the combobox's value
I have Attached an example file,
I am building a timeclock, and am using a user form to allow people to sign in/out.
I have a punch in form that logs the inputed username and password (after being checked against my employee list), along with a count of their username on this sheet (as a count of how many times they have punched in) and a timestamp (column 4). These values are all pasted to the first blank row in my worksheet "PunchInTimes".
Then, I have a punch out button that logs these same values the same way, only on "PunchOutTimes". Then, the idea is to link the index number of the PunchOutTimes record and PunchInTimes record for any given user, so that when they punch out, a complete record is pasted (to the first blank row) in a separate worksheet called "Timesheets".
I have been able to paste the username and count to the "Timesheets" sheet, however as soon as I try to index/match the count and inputed username (on the punch out form), I get an error 13 type mismatch.
I'm trying to paste the corresponding punch in time to this punch out time, so ive used an index/match with two columns (username and count) found in "PunchInTimes", and try to return the corresponding 4th column value (punch in time). After pasting the "punch out only" values to the PunchOutTimes, i used a "With/End With" statement, and set wsc equal to my 'timesheets' worksheet at the beginning of my code. So the line where I get my error is below in bold:
[Code] ......
sheet 2
column C is list of chemicals (to give context)
column A is a list of the publication numbers they apear in
column B is GOING to be the list of publication titles they are in
sheet 3
column A is a complete list of every publication number in our library
column B is the corresponding publication title
what i would like to do is extract the title from sheet 3 and input it into column B sheet 2 corresponding to whatever pub number is listed in column A of sheet 2
the code i have so far is in column b sheet 2 "=INDEX(Sheet3!B:B,MATCH(A2,Sheet3!A:A,0))"
now the problem i have is this works perfectly when only one pub is listed in a cell in column A sheet 2 but when there is more than one pub listed (ie "pub number" next line in cell "another pub number") it gives a N/A result.
is there anyway to call up multiple pub titles from the multiple pub numbers within one cell
Sub Moveit2()
Dim Quantity As Range
Dim Cell As Range
Dim Cell2
Dim Breaks As Range
Set Quantity = Range("a2", "a21")
Set Breaks = Range("g1", "s1")
For Each Cell In Quantity
For Each Cell2 In Breaks
If Cell2 = Cell Then
Intersect(Cell2.EntireColumn, Cell.EntireRow) = Cell.Offset(0, 1)
End If
Next Cell2
Next Cell
End Sub
I have this macro to move things to the right. Sort of like a vlookup in a way. However, it runs using one range @ a time. For example it will look up the quantity in A2 versus what's in Row 1 and if they match, data from B2 would be moved into correct column. However, I'd like to run for multiple columns at the offset so I can don't have to keep changing data in the macro. Like want to run for these ranges at the same time as running the first range.
Set Quantity2 = Range("c2", "c21")..........
I am running some VBA code that works fine, until I specify a filename that contains embedded blanks. Hopefully, the following code and screen captures will demonstrate what is happening. First the code that opens the files ...
View 8 Replies View RelatedI am trying to drop (paste) in new data in a range in sheet 2 and cross reference a column with a table in sheet three and display all rows of matching instances in sheet 1. Example:
Sheet 3 has
a1 b1
amcdap amber connor
apsdap ashley simpson
sheet 2 has
a1 b1 c1 d1 e1
amcdap 300 400 2:00 9:00
apsdap 500 300 4:00 8:00
capdap 200 300 5:00 9:00
dlsdap 400 300 2:00 8:00
I need to return only rows 1 and 2 to sheet 1. I guess ideally I'd like to drop data in sheet 2, click button.
I have these data arranged in three columns as follows:
ABC
91183
112198
***3181
54201
***5***
***6***
***7***
***8***
(where *** stay for blank cells)
I need to "report" somewhere and somehow within the spreasheet hopefully by means of some formulas the following data:
1. for column "C" the maximum value within first group of consecutive numbers that are exceeding 180: in this example equal to 201
2. for column "C" the total number of values within first group of consecutive numbers that are exceeding 180: in this example equal to 4
3. for column "B" the first number corresponding to the first group of consecutive numbers that are exceeding 180: in this example equal to 1
4. for column "A" the corresponding number to the maximum value within first group of consecutive numbers in column "C" that are exceeding 180: in this example equal to 5
and most of all I would like to generalise the problem so that to "report" the same data for all cases that are appearing in the above example;
I am working with two sheets, Sheet one has 1 column of information with 12 columns to the right as categories. I want to be able to put an 'X' in any one of the 12 column rows, (category) and have a function that will copy/pastes the information from the main column (column #1, row=any) to the second sheet. I have tried True-False function, argument function, Vlook etc., I still cannot get it to work.
View 10 Replies View RelatedI am trying to use a macro to delete 2 columns from a spreadsheet using a macro.
This sounds easy, but due to the fact the columns needing to be deleted ‘cross’ merged rows the macro then deletes all the columns based on the merged cells.
In the attached spreadsheet (ColDel) if you manually highlight columns D and E and then use Edit/Delete this will delete columns D and E correctly.
So I have two columns, in column a, i have a list of zip codes and in column b i have a larger list of zip codes. is it possible to find what zip codes in column a appear in column b, and then output those zips?
View 1 Replies View RelatedExcel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
View 9 Replies View RelatedI have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4