Lookup Manufacturing Details Depending On Product Type
Dec 15, 2009
I have created a drop down list of products that we manufacture on a tab in excel. I want to use this list so we can create production/manufacturing paperwork that can be used in our factory.
On other tabs I have created the manufacturing specifications which are a list of specifications and cutting sizes that vary depending on the 1st column /size selected. The rest of the data for follows across.
However for the three products the manufacturing specifications are different so what I want to know is can I create a formula that says if I select product A then look at product A's specification tab, if I select product B select product B's specification tab or if I choose product C then look at product C's specification tab?
I can create a vlookup formula that works for one product and drops the necessary information into a sheet I have designed but I don't know to get it to distinguish the correct cutting info depending on the product type selected.
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
In the first sheet I have two columns, one for the product_id and one for the name of the product. So the Sheet1 is like a small database. The second sheet is for the orders.What I want is when I type the product id in the A column of the orders sheet(Sheet2) to auto insert the product name in the B column so i dont have to write it every time.
I have a set of sales data which shows the dates of transactions and also the product type that was sold. I want to see the monthly sales for each product type. I can get a total for all product types over the months using the following:
We have 5 - six month programs and five - 12 month programs we are going to sell; each have a different price. I Want to insert number of projected sales manually for each month and then have excel distribute/spread revenue evenly over six or twelve months into a separate set of cells. First payment would be received at time of sale.
I need a formula that will bring up the Model type of a product based on its Material code. All the models I need to generate have a "root" number in them (the first 6 digits define model type). This is what I need to fill out:
I am trying to track cost. A master purchase order sheet has a column with a number relative to an account. I have about 50 accounts and a seperate sheet for each account. I want to enter the account number on the master purchase order sheet and based on that number, have the following data on that row copied to the next available row in the sheet for that account.
I'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
I was wondering if there was a way to create a pop-up list to appear when a user selects a certain cell that would provide the user with a list of (in this particular case) inventory items. The user would select which items they require for the task at hand and the total $$cost of the items would appear in the cell once is is deselected.
On an order form the customer will be able to enter the width and projection of several products that they want to order. The way these products are priced are in a Matrix of Width over projection. The current system i have designed is:
1. The pricing Matrix's have all been put into one big table and given a unique id per product matrix. 2. An advanced filter has then been run and and it extracts the appropriate matrix and copies it onto the process sheet. 3. An Index/Match formula is used to find the price for the inputted width and projection. It does this by finding the intersect point of the width and projection on the table.
Currently this will be put into a macro and assigned to a button.
The problem is that up to 15 (or possibly more) products need to be able to be ordered in one order form. With the current system it means there will be a lot of Advanced Filters and there will be a macro button that will need to be clicked after every product order (and they're could be 15 or more). Obviously this isn't very professional, it is time consuming and must be the hard way of doing it.
I was wondering what over systems that could be used for this sort of thing. The more solutions there are to this problem the better. Attached is the file. If you do post a solution it would be preferred if you could also post a file with a working example in. I find it much easier to learn the solution if i can see it working.
I am trying to make an EASY Manufacturing Cost to Retail pricing calculator. This calculator would have ability to include cost of goods, labor, markup etc of components manufactured and sold as retail products, example: small bookshelves versus large bookshelves or cabinets all have different materials (wood types, stain etc) in determining the final retail product costs that would reflect time of labor hours involved in producing to determine final retail costs. Should be simple in Excel 2000 (my version). I have the basic template created and have used Data Validation Drop Down Lists and utilized LOOKUP function. While my knowledge is limited in Excel, I am frustrated as how the LOOKUP function works, I can only get it to work where in the formula, the costs per unit are input manually, whereas I would prefer to have the data input automatically from columns of calculated wholesale cost plus markup per square foot data, ie: =lookup(A1, X1:X30, Y1:Y30) but get errors when doing this. Instead this works: =lookup(A1,{"pine", "oak", "birch"},{"3.99","7.87","5.15"}) and using this cell (A1) in my calculations for including the square foot costs in the final retail calculations. While this seems to work, it is not easily modifiable as costs change rapidly and would like to easily input the cost per square foot of the different woods in their own cells rather than in the formula calculation of the lookup. Hope that makes sense..... any suggestions? perhaps lookup is not the best function for what I am attempting? - sample file is attached, light green are notes of where my data is located.
I am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates Column C & DNumerical data not used in any calculations Column EThe numbers to multiply together Cell A1Start date to be used in the PRODUCTformula Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
I work at a cardboard manufacturing plant in the Q.A Department. Occasionally paper claims need to be raised due to the paper being faulty (out of spec.). I have attached a spreadsheet which at present works out the paper cost according to which paper grade is typed into a particular columb. But, paper price varies according to the width (i.e. Deckle) of the paper as well. And this is the variable which I have not been able to implement thus far.
The relevant columbs are 'D', 'E' & 'I' for the purposes of this formula... It should be noted that below this I have pasted in the paper pricing list... and that in general each paper grade has 3 different prices depending on the Deckle (i.e. paper width), so there are 3 possible prices which can be displayed depending on the Deckle inputted into columb 'E'.
I would like to have a Macro to go from the first tab called "Start" and end up with the second tab "End" automatically. BAsically I need to take the product on each line under Tab Start and reproduce it for sizes 35-41 always ending with "-(size)". Then this new Product with Size needs to be multiplied one below the other for as many times as I have pictures (number shown under column B of the tab Start). Next to this value in column B of tab End I'd like the same name listed again but with the number 1, then 2, then 3, etc. as needed and the extension .jpg.
I have attached a sample spreadsheet which describes my problem.
In C2 and C3 under the first business coalitions column, I have written in text what I would like to be displayed automatically with a formula. The trouble is that, as you can see, Abbott Laboratories is a member of 3 business coalitions. Therefore, a simple vlookup doesn't work because that would only return 1 result.
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I have a Master workbook with 4 sheets named WEEK 1 to WEEK 4. At work we work around 13 4 week periods and need this workbook to be dated accordingly, that is Period 1 Week 1 and date of first day (Sunday) of that period. The ideal solution would be for the user to enter 1 to 13 into a cell and via a button all dates to be populated and a new workbook created for that period. I have attached a sample workbook with the 4 weekly sheets and a date range on another sheet to show the range I need the dates from. I hope the workbook explains what I need better than my explanation here!
Depending upon a figure entered e.g. = $ 895.00 and also Depending upon a state being entered e.g. = NSW. Then Excel will lookup a series of cells to produce the correct figure depending upon the correct data ciritera being met. I have a data table sitting behind the spreadsheet with all relevant values.
I am building a timeclock, and am using a user form to allow people to sign in/out.
I have a punch in form that logs the inputed username and password (after being checked against my employee list), along with a count of their username on this sheet (as a count of how many times they have punched in) and a timestamp (column 4). These values are all pasted to the first blank row in my worksheet "PunchInTimes".
Then, I have a punch out button that logs these same values the same way, only on "PunchOutTimes". Then, the idea is to link the index number of the PunchOutTimes record and PunchInTimes record for any given user, so that when they punch out, a complete record is pasted (to the first blank row) in a separate worksheet called "Timesheets".
I have been able to paste the username and count to the "Timesheets" sheet, however as soon as I try to index/match the count and inputed username (on the punch out form), I get an error 13 type mismatch.
I'm trying to paste the corresponding punch in time to this punch out time, so ive used an index/match with two columns (username and count) found in "PunchInTimes", and try to return the corresponding 4th column value (punch in time). After pasting the "punch out only" values to the PunchOutTimes, i used a "With/End With" statement, and set wsc equal to my 'timesheets' worksheet at the beginning of my code. So the line where I get my error is below in bold:
I have a lookup tab which contains three columns: Column A is a tax ID #, Column B is a set of numbers and Column C is a list of street names. I need help with creating a lookup type formula for my column AB in the (worksheet/tab) titled 2009, which will look at and compare the data in columns F & G and compare them to columns B & C in my "lookup" tab and if a similar address is found based on both the street name and number then the tax ID # affiliated with that address from the "lookup tab" will be automatically placed in the column AB in the 2009 tab. I hope this makes sense.
I have a graph which displays information from a vlookup.. The vlookup can bring either numbers which are in percentages format or ordinary number format.
The question I have is is it possible for the graph to automatically change format depending upon the information who is looked up..
I'm trying to use the percentage depending on what price I enter in a cell. For example; if I enter $135 then 10% will be used, if I enter $65 then 12% will be used, and if I enter $47 then 14% will be used.
i need to look up a product based on the number and the qty. see the example attached.
On tab "Printer - S" 1 need to lokup the costs based on the product code 8 and the qty 100. How do i do this and make it adjustable for any range of priduct codes and qtys. Again, becuase this will be used on a Mac Office, i cannot use macros.
I have attached a file called Test2 which has a public function called DBLookup. The function looks in the attached access database simulating a Vlookup just like in Excel. The problem I am having is when that data appears on sheet1. I am getting #VALUE in the cell and the erroe states "a used value in the formula is of the wrong data type".
my
Dim adoCN As ADODB.Connection Dim strSQL As String
Const DatabasePath As String = "C:Test2.mdb"
'Function argument descriptions 'LookupFieldName - the field you wish to search 'LookupValue - the value in LookupFieldName you're searching for 'ReturnField - the matching field containing the value you wish to return...
I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column. For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
I'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?