I need to write a FOR... Next loop that will loop through a range of rows, select the same cell range on each row, perform a task, then advance to the next row. I can't seem to figure out how to substitute the loop counter for the row index. For example:
For counter = 1 To 100
Range("B(counter)","F(counter)").Select
ActiveCell.FormulaR1C1 = "1"
Next counter
I have 2 worksheets. The first sheet has data of which some needs to be copied to a second worksheet. The trigger is a value found in column E. If a match is found, then a copy statement needs to be built. The values in F, G & H are the values to be used in the copy statement. The content of cell H may be numbers or letters or both.
What is the correct format of the copy statement?
Dimension all variables
Dim RowPointer As Long
Dim wbContrib As Workbook
Dim wbMaster As Workbook
Dim SheetName As String
Dim target_sheet As String
Dim target_cell As String
Dim Target_value As String
Dim CellAddr
'
' Initialize variables
Set RowPointer = 1
Set wbMaster = “Master.xls”
'
'******************************
I am reviewing a macro someone left at a client, but I am stuck on the rowcounter declaration.
View 7 Replies View Related'How do I use a FOR NEXT loop on a union to just list all cell values in Col A?
'Just need a little help getting a handle on ranges and the union of ranges.
' This is my first time posting a question so any patience is appreciated.
Dim r1 As Range
Dim r2 As Range
Dim myMultipleRange As Range
Dim xCell As Range
Set r1 = Sheets("Sheet1").Range("A1", Range("A65536").End(xlUp))
Set r2 = Sheets("Sheet1").Range("B1", Range("B65536").End(xlUp))
Set myMultipleRange = Union(r1, r2)
r1.Select
For Each xCell In r1
'Ive been using this type of code to access anything I need from a sheet.
Debug.Print r1(xCell.Row, 1), r1(xCell.Row, 2), r1(xCell.Row, 3)
Next xCell...............
How do I divide a range (number of rows will vary) into groups for calculation purposes?
I have a spreadsheet with too many dependencies to calculate properly (over 400,000). After I calculate I can delete the empty rows, and then there will only be a few hundred rows left and it will calculate just fine.
I think all I need is a loop that will break the range into groups and calculate the groups separately, but I'm very bad at loops.
This is what I need to break into workable parts.
Sub FilterTrue()
ActiveSheet.Calculate
Range(Range("AC16"), Range("AC16").End(xlDown)).Select
Selection.AutoFilter Field:=1, Criteria1:="TRUE"
Selection.SpecialCells(xlCellTypeVisible).EntireRow.Delete
Selection.AutoFilter
End Sub
This has sort of been asked before
Improving a vba function argument check loop
but is there a way to loop through a series of variables like var0...var9? You can obviously loop through and make a set of strings with the right names,
Dim I As Integer
Dim Var As String
For I = 1 To 5
Var = "Var" & I
Next I
Is there a way to use the contents of a string variable to call a variable with the same name as contents of the string? or somehow concatenate the a string with a number like
array[i]=var.[i]?
I am trying to loop through different SlicerCaches but it doesn't seem to work.
Here is the code, I am trying,
VB:
Test_Name = Array("[Test - Test Allocation]", "[Test 2]")
For i = LBound(Test_Name) To UBound(Test_Name)
ActiveWorkbook.SlicerCaches("Slicer_Exec_Function_Summary1").VisibleSlicerItemsList = Array("[Mercury].[Exec Function Summary].&" & Test_Name & "")
The code returns a mismatch 13 error.
When I try it without an array, it works fine.
VB:
Test_Name = "[Test - Test Allocation]"
ActiveWorkbook.SlicerCaches("Slicer_Exec_Function_Summary1").VisibleSlicerItemsList = Array("[Mercury].[Exec Function Summary].&" & Test_Name & "")
I am trying to define my variables with a for loop and if I run the code to the line after the first variable is defined, it shows that the variable is equal to the appropriate value, but after the for loop is done all of the variables are empty.
[Code] ......
I have a process where I need to search for multiple customer numbers and delete line associated with them.
My question is how do I create this process to run in a loop going through all 10 numbers?
i have set up some test script below!
i dont know if it is possible but can you concatinate two variables i.e in the example below can i move from Sum1 to Sum6 using the intiger stored in i as the end of the sum variable
Sub Sum()
Dim i As Integer
Dim Sum1, Sum2, Sum3, Sum4, Sum5, Sum6 As Integer
Dim Ltr As String
Dim Sum As String
Sum = "Sum"
Sum1 = Range("B5").Value
Sum2 = Range("C5").Value
Sum3 = Range("D5").Value
Sum4 = Range("E5").Value
Sum5 = Range("F5").Value
Sum6 = Range("G5").Value
For i = 1 To 6
MsgBox "The value in cell " & i "is " & Sum & i
Next i
End Sub
I have variables 1-6 like the following:
dDDDD1 = Format(d1, "dddd")
dDDDD2 = Format(d1, "dddd")
They correspond to a date from a cell and I just format one for "Monday" through "Saturday". In another module I'm opening a file that has worksheets named "Monday" through "Saturday" as well. I need to do the same thing to each of these sheets so I'm trying to setup a For/Next loop. I'm assuming you can't put a variable to a variable as I keep getting 'variable not defined' when I try to insert 'i'? Or am I just going about this all wrong?
For i = 1 To 6
Workbooks.Open ("J:AcctMgtITrepADIinf-v2-WE0922.xls")
Sheets(dDDDD & i).Unprotect Password:="hownowbrowncow"
Sheets(dDDDD1).Columns("C:E").Insert Shift:=xlToRight
Sheets(dDDDD1).Columns("B:B").TextToColumns Destination:=Range("B1"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=False, _
Semicolon:=False, Comma:=True, Space:=True, Other:=False, FieldInfo:= _
Array(Array(1, 1), Array(2, 1), Array(3, 1)), TrailingMinusNumbers:=True
With Sheets(dDDDD1)
Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp))
End With
ConcName = "=B1&"", ""&C1"
LastRow = RngCol.Rows.Count
Sheets(dDDDD1).Range("$E$1:$E$" & LastRow).Formula = ConcName
Next i
I'm having difficulty with concatenation and the use of a string variable. On my attached spreadsheet I have a row called Must Fund Tasks. The binary variable in the cell is entered by a selection on a user form. If the value of the cell is "1" then that particular task must be funded. The code I developed forces solver to keep the binary value of 1 in that particular cell when looking for the optimal solution. This same row of binary variables is the row of values that I have solver change to find my optimal solution.
My problem is that I have another set of contraints based on mutually exclusive tasks. If there is a binary value of "1" in at least two of those cells then only one of the tasks may be funded and they are said to be mutually exclusive. In other words, if the user form indicated that tasks 1 and 5 were mutually exclusive then the binary values are Task1=1 and Task2=1 and the constraint would be Task1+Task2<=1. The code I've written looks for a value of 1 in the Mutually Exclusive row and if it finds one it adds the name of the corresponding "Must Fund" cell 4 rows above to a set called ExclusiveSet. ExclusiveSet is defined as a string and I'm having trouble with the concatenation, I keep geting a "+" out in front because of the intial loop when ExclusiveSet="" ( it returns "+$F$29+$H$29"). I'm also not sure if Range("CalcsStartcell").Offset(I + 15, 3).Formula = "=ExclusiveSet" is the appropriate way for me to return the value of the ExclusiveSet in the desired cell.
Sub constraint()
Dim p As Integer, CalcsStartcell As String, I As Integer, T As Integer
T = 7
I = 5
CalcsStartcell = "C16"
'setting Mutually Exclusive constraints
With Worksheets("Sheet1").Range(CalcsStartcell)
For p = 0 To T - 1
If .Offset(I + 12, p + 1).Formula = "1" Then..................
I am having trouble defining a variable in a For loop. When I run the loop the first time everything seems to work fine, but when the loop goes back through the second time it carries its previous value with it. Here in lies the problem if the variable is supposed to be empty (not assigned a value). So, for example: 'Variable' in the code below may or may not be given a value depending on the conditions in the For i loop. If it is given a value then 'Variable' will still have that value on the next pass through the For j loop. And if none of the conditions are met for the If statement in the For i loop the second time through the For j loop, it should be an empty variable, but instead the code is reading it as having a value (from the previous pass through the For j loop).
[Code] .....
I have tried using:
[Code] .....
After the For j line, and instead of using:
[Code] ....
I tried using:
[Code] ....
and I've tried:
[Code] .....
I get an Object error with either line I use. I just want to be able to reset the variables each time through the For j loop so in the case of an empty variable, it doesn't try to calculate based on the previous value.
I need to be able to locate some important columns in a table of raw data (the column locations are not fixed).
I would like to identify the locations (based on the heading values in Row 1) and store them as Public variables. The Match function works fine for this, however I'd like to make a simple loop to set these variables (opposed to repeating the function for each).
In the example below, I can't figure out how to reference "List1(Count)" as the name of the variable I'm trying to set.
Code:
Public Field1 As Long, Field2 As Long, Field3 As Long 'The column numbers will be stored here
Sub FindFields()
Dim List1(3), List2(3)
Dim Count As Long
'Public variables (declared above)
[Code] ......
So after running FindFields(), the Test1() macro should give "1 - 2 - 3" (for example) as the locations of the fields in Sheet1. But currently this doesn't work.
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
What the code does is that it runs in a Master workbook, and searches for XLS files in a defined folder. It opens a file, count, closes the workbook and takes the tallied number of sheets and places it in the master file, column A being File Names and column B as Number of sheets. What I need is for the code to take the file name from column A, run it and then place sheet counts in Column B and then move down the columns until all the counting is done. Currently I am only able to define one row using the range function and i'm at a loss.
'Get file names and enter into Master
Public Sub ShowFolderList()
Dim wb As Workbook
Dim ws As Worksheet
ChDrive "C"
ChDir "C:Documents and SettingsTest Folder"
outrow = 2
Filess = Dir("*.xls")
While Not Filess = ""
Cells(outrow, 1).Value = Filess
outrow = outrow + 1
Filess = Dir()
Wend.......................
Using excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
I'm interested in creating a two variable data table with the two variables in the top two rows.
I'm aware that two variable data tables are usually done in an array with variables in the top row and leftmost column. However, as there are multiple outputs to the variations that I want to make it makes sense to have the variations in the two top rows.
This vba code will delete all the rows which have data in. At present it starts on A2 (so doesnt delete anything above A2. Which part of the code in red would I need to change for it to be A3 and which would I need to change for it to be B3.
View 5 Replies View RelatedI have a worksheet ( adage inventory ) and I am trying to clean up some un-needed rows.
I need this deleting of rows based on a couple of variables.
I need to keep any row that Col F has the text "QCCONTROL"
and
I need to keep any row that COL N has the text "HOLD"
and
I need to keep any row that COL N has the text "REJECTED".
Sub Delete_OK_Lots()
lr = Sheets("adage inventory").Cells(Rows.Count, "A").End(xlUp).Row
For x = lr To 2 Step -1
If Sheets("adage inventory").Cells(x, "N") "HOLD" Or Sheets("adage inventory").Cells(x, "N") "REJECTED" Or Sheets("adage inventory").Cells(x, "F") "QCCONTROL" Then
Sheets("adage inventory").Rows(x).EntireRow.Delete
End If
Next x
End Sub
I used a macro to get the following code, but would like to do this with VBA code where I use variables and numbers instead of the
macro's ("I568:J568") notation. Thus I would have something like (lRow, 9) : (lRow, 10) or whatever the correct notation is. Basically I'm trying to copy and paste formulas from one row to the next.
I am trying to sum the range of column B (Being the found match in column A offset 1) to the relevant column set by the variable intcolumn (integer value of the column matching the criteria (in this case column 25)
Code:
rngMember.Offset(0, 13) = Application.Sum(rngTradeMember.Offset(0, 1) & ":" & rngTradeMember.Offset(0, intColumn))
The sum does not fail but returns an incorrect figure.
What I am hoping to see is a sum of the following
result sheet offset (0,13) = sum of (column B to the column Y)
I'm trying to create a simple checkbook application for a friend. I've gotten pretty much everything I want figured out except for two functions, which are basically the same thing. I'm trying to find the sum of all deposits and of all withdrawals based on two entered dates.
Basically, they enter the dates, and the formula finds the dates, then sums all the deposits/withdrawals between them. I attached the workbook with some sample data in case I wasn't really clear.
I am doing some work in which I need a very flexible tool. I will be doing regression analysis on thousands of funds at a time. I need to define the range for each fund by a count function that counts the number of monthly returns that are posted. The code I have so far is below (I underlined where the references use variables):
View 3 Replies View RelatedI'm trying to use a range(Cells1),(Cells2) all working fine, but now I'm trying to use variables for the Row selection. selection.row as one of the variables, but keep on getting a error.
Code:
Sub Clear_Time()
Dim Rng As Range
Dim pointer As Integer
pointer = Worksheets("Summary").Range("Z1").Value
Worksheets("SubPanel").Range((Cells(10, pointer)), (Cells(52, pointer))).Find(What:="").Activate
[code].....
How would I select a range using variables? For example, say I wanted to say
myRange = Sheets(1).Range("A1:A100"),
but the column was variable. How would I do this if the column number was stored in a variable?
How to decide the two range object variant represent the same range? Plz check the following code, How to decide Rng4 and Rng5 is or not the same range?
Sub IsTheSameRange()
With ActiveSheet
LastRow = .Cells(65536, "B").End(xlUp).Row
Set Rng1 = .Range(.Cells(3, "K"), .Cells(LastRow, "K"))
Set Rng2 = .Range(.Cells(3, "AE"), .Cells(LastRow, "AE"))
Set Rng3 = .Range(.Cells(3, "BQ"), .Cells(LastRow, "BQ"))
Set Rng = Application.Union(Rng1, Rng2, Rng3)
Set Rng4 = Rng.SpecialCells(xlCellTypeFormulas, 23)
Set WhlRng = .Range("A3:DR" & LastRow)
Set Rng5 = WhlRng.SpecialCells(xlCellTypeFormulas, 23)
End With
End Sub
I'm trying to edit the predefined range in my macro that changes formulas to values.
My current macro looks like this:
Dim vCol As Variant
vCol = Application.InputBox("Select Column", Type:=2)
If vCol = False Or vCol = "" Then Exit Sub
Set UserRange = Range(vCol & "9:" & vCol & "35")
UserRange.Value = UserRange.Value
End Sub
I tried extending the range to include 48:53, but it doesn't work. I tried with this: Set UserRange = Range(vCol & "9:" & vCol & "35" & vCol & "48:" & vCol & "53")
I am trying to select rows using constants I have set-up so that I can then delete those rows. However I don't know how to set-up the row formula to accept the constants. So far I have something like
Dim a As Integer
Dim b As Integer
row(a:b).select
selection.delete