Loop Through Rows In A Range
Oct 24, 2007I am reviewing a macro someone left at a client, but I am stuck on the rowcounter declaration.
View 7 Replies
ADVERTISEMENT
Loop Through Rows Of A Union Range
Aug 19, 2006'How do I use a FOR NEXT loop on a union to just list all cell values in Col A?
'Just need a little help getting a handle on ranges and the union of ranges.
' This is my first time posting a question so any patience is appreciated.
Dim r1 As Range
Dim r2 As Range
Dim myMultipleRange As Range
Dim xCell As Range
Set r1 = Sheets("Sheet1").Range("A1", Range("A65536").End(xlUp))
Set r2 = Sheets("Sheet1").Range("B1", Range("B65536").End(xlUp))
Set myMultipleRange = Union(r1, r2)
r1.Select
For Each xCell In r1
'Ive been using this type of code to access anything I need from a sheet.
Debug.Print r1(xCell.Row, 1), r1(xCell.Row, 2), r1(xCell.Row, 3)
Next xCell...............
Loop Range Using Variables For Rows
Dec 16, 2006I need to write a FOR... Next loop that will loop through a range of rows, select the same cell range on each row, perform a task, then advance to the next row. I can't seem to figure out how to substitute the loop counter for the row index. For example:
For counter = 1 To 100
Range("B(counter)","F(counter)").Select
ActiveCell.FormulaR1C1 = "1"
Next counter
Loop To Calculate Rows In Selected Range In Groups Not All At Once
Oct 9, 2008How do I divide a range (number of rows will vary) into groups for calculation purposes?
I have a spreadsheet with too many dependencies to calculate properly (over 400,000). After I calculate I can delete the empty rows, and then there will only be a few hundred rows left and it will calculate just fine.
I think all I need is a loop that will break the range into groups and calculate the groups separately, but I'm very bad at loops.
This is what I need to break into workable parts.
Sub FilterTrue()
ActiveSheet.Calculate
Range(Range("AC16"), Range("AC16").End(xlDown)).Select
Selection.AutoFilter Field:=1, Criteria1:="TRUE"
Selection.SpecialCells(xlCellTypeVisible).EntireRow.Delete
Selection.AutoFilter
End Sub
Store Row Number Within Loop And Delete All Stored Rows After Loop?
Sep 11, 2013I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
Macro Loop To Extract Specific Values And Min/Max Values From Column/Rows Range
Jun 3, 2009Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
VBA Command Loop Through Spreadsheet Rows Until Blank Rows
Apr 22, 2012Using excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
Loop To Add Rows
Jun 15, 2007I am automating a spreadsheet. I want to be able to take all values of product 1 from column a and then add the corresponding values of units and dollars in the adjacent columns.
So I would like a list with each product at the bottom, and corresponding units and dollars, yes I know I can use formulas and pivot tables, but I would like to automate this
The problem is that my loop works for the first product, but it will not go again for the next one.
Here is my code and spreadsheet with code in it, try it to see
Sub rowadd()
Sheets(1).Activate
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
End If
End With
Vlookup To Loop Through Rows?
Feb 18, 2014My workbook contains four sheet: input, letter 1, letter 2, data
Data contains customer records, column A is numbers 1-500
Input sheet is a customer form containing details for 1 customer. The customer details are pulled from the data tab using vlookups based on a value in cell a1 on the input tab.
Letters 1 & 2 are letters to a customer. They again use vlookups to populate various fields on the letters with the customer information on the input sheet.
What I need:
A macro to populate the input form by working down the records on the data sheet. when the input form is populated with customer information it is to export the letters as a pdf and then move on to the next row of customer details.
I have the export to pdf macro, i just cannot get the input form to loop through the customer records..
Loop For Deleting Rows
Apr 20, 2009Loop for Deleting Rows
Whats wrong with my code ?
Eliminate Rows (loop To The End Of Each Row)
Jul 13, 2009I'm trying to write a macro that will loop to the end of each row, if the last cell is a number it will cut and paste that whole row into another sheet, if the last cell is a word then it will leave it as it is.
View 3 Replies View RelatedVBA Loop And Delete 15 Rows
Sep 10, 2013I have output from mainframe that is copy/paste to an excel workbook. I need to have VBA loop and delete the 15 rows. This is mainframe output so it will always be 15 rows
Count
Campus
Name
Course
Start Date
1
336001
Student1
1
9/2/2003
[Code] ............
Macro Loop Not Using All Rows
Nov 9, 2006I've taken over a spreadsheet that has a macro in it. However it doesn't seen to function properly. The big issue with the Macro is that it is only running for the first 80 lines of data. I can't have a restricted range as the number of lines could increase/decrease each month depending on activity. I've attached the code.
Sub Macro1()
Dim strTemp As String
Dim intSpace As Integer
Dim intZero As Integer
Dim i As Integer
Dim strCat As String
Dim strZero As String
Dim intLoopCounter As Integer
Dim rw, this
intLoopCounter = 1
For Each rw In Worksheets(1).Cells(1, 1). CurrentRegion.Rows
this = rw.Cells(1, 1).Value ...................
Loop Down Column & Across Rows
Aug 17, 2007I need to create a loop within a loop. First loop works fine as follows:
-------------------------------
x = 0
Dim DirArray(0 To 80) As String
Dim intI As Integer
For intI = 0 To 80
DirArray(intI) = Range("start").Offset(intI, 0).Value
Next
For x = 0 To 80
lob = DirArray(x)
Range("lob") = lob
Calculate
Sheets("WBB LOB Summary").Select
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Next
----------------------------
At the 'start' point, first loop works downward through rows. Second loop would work across columns in each row within the first loop. I will have to use a variable for 'y' (the across value) b/c the number of cells containing data can vary between 3 & 9, but I have a COUNTA in each row setup to use as the variable.
So spreadsheet data would look like this with A being the 'start' cell:
A 1 2 3
B 1 2 3 4 5 6
C 1 2 3 4
I need to pickoff A1, A2, A3, B1, etc, picking up every sub-category on the sheet.
Loop Through Rows In A Listbox And Remove
Nov 20, 2008I'm trying to loop through each row in a listbox on a userform and remove the value if it isn't equal to the year shown in a CBYear. i can't sem to figure out what to use in my for statement to point the VBA to the Row as it were
View 2 Replies View RelatedLoop Through User-defined Rows
Jan 11, 2009My goal is a macro that exports a .txt file where the user selects desired rows (strains, not necessarily contiguous), header columns (collection data), and a single sequence column. The output format (called fasta) is:
>headerA1 headerC1
sequence1
>headerA4 headerC4
sequence4
where each new ">" is a new strain (row). My code so far gets caught up in the string assignments in the for loops:
Conditional Copy_Paste_Delete Within Rows Loop
Feb 19, 2009I have a Worksheet with 10K rows where the value for column A is "SMV". There are other rows where the value for column A is "SML". For rows where A1 = SMV, I want to make B1.value = C1.value and clear the contents of C1thru F1 (C1:F1).ClearContents.
No, I cannot sort, cut/paste and resort or put in a helper column with a clever formula (I think) because this Worksheet gets output to a delimited text file by a variety of users.
VBA Code - Loop Through And Delete Rows
Oct 12, 2013I use this code to delete some rows, how I would modify it to work in another spreadsheet where it would "Loop" through and delete rows that start with "User:Kellcyna" down to where the rolls start with "Numbers", and delete the rolls that start with "Total cost center" down to where the rolls start with "Numbers".
The data can contain up to 50000 rolls at times.
Sub Finally()
Application.ScreenUpdating = True
[a:a].AutoFilter Field:=1, Criteria1:="="
[a2:a65536].SpecialCells(xlVisible).EntireRow.Delete
If [a1] = "" Then [1:1].Delete
ActiveSheet.AutoFilterMode = False
[Code] ........
Here is a sample of the data I need the macro to work on. The rows I need deleted are the rows that are highlighted.
User: Kellcyna STANDARD HOURS BY COST CENTER Date: 09/29/2013 Time: 15:10:04 Page: 10
Comments:
Order Op Emp Post Work ctr Setup Unit Planned Earned Total Actual Actual Actual Total Total Orde C R
# Date SU Unit Plnd Stds Setup Run Tme Brd Tme Prod Run Time E
104527059 0010 00000000 09/25/2013 HSW01 0.000 0.4 HR 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 PP01
104523849 0010 00000000 09/25/2013 HSW01 0.000 0.2 HR 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 PP01
[Code] ...........
How To Loop Through Specific Columns And Rows
Mar 25, 2014I am stuck with looping columns and rows.What i am trying to do is... I have to loop through columns E3 to G3 and also rows of each column and check for a condition inside the column.How can i achieve that? I have the following structure.. How can i code it?
For i=E3 to G3 'Column loop
for j=4 to 47 'Row loop
'code to check if the value isnumber
next j
next i
Delete Rows, Formatting, Loop
May 15, 20091. Delete all data after row 51.
2. Find the average cost (column 4) and delete all rows where the cost is below average. Thus only retaining rows with an above average cost.
3. Then I want to conditionally format any number in column 6 which appears more than three times.
4. I want to loop this through all worksheets in my workbook.
Loop Rows To Find A String
Aug 21, 2009I have an Excel workbook that i need to loop through all rows searching for a certain string we can call "Totals". There are more than one, and i need to grab the values from each at an offset in the same row, different column, to total at the bottom. I have tried a few things unsuccessfully. The code below is just my first step to try to find the row, i know there are problems as i am unfamiliar with the different properties of a given variable.
Function FindRow(szName) As Integer
nFoundRow = 0
For nRow = 0 To Worksheets("Totals").Columns(nCol).Rows.Count
If StrComp(Worksheets("Totals").Cells(1, nRow), szName) = 0 Then
nFoundRow = nRow
End If
Next nRow
FindRow = nFoundRow
End Function
Sub Totals()
nCol = FindRow("Totals")
ActiveCell.Select = nCol
MsgBox (nCol.Value)
End Sub
Loop Through Rows & Copy Each Row To New Workbook
Aug 27, 2008I have some data for my students in the range D2:G251, where each row is a different student. I need to write a macro that, if there is an 'x' against their name in column D, will copy the data in columns E-G into range A1:B500 and copy that range into a new workbook and save the workbook with the students name. The following code does this for the first row, but I don't know how to write a loop (or whatever) to make it do it for the other 249 rows.
Private Sub CreateNewSheets_Click()
Dim ws1 As Worksheet
Set ws1 = ThisWorkbook.Sheets("Template")
Dim Rng1 As Range
Set Rng1 = ws1.Range("A1:B504")
varPath = ThisWorkbook.Path
If ws1.Range("D2") = "x" Then
ws1.Activate
ws1.Range("e2:g2").Copy
ws1.Range("B1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=True
Rng1.Copy
Workbooks.Add....................
Loop Over Rows And Delete Row If Value Not In Table
Aug 11, 2006I have two worksehets. The first worksheet contains data on products. The product code is in column A. My second sheet contains a list of product codes in column a. I want to delete all rows in worksheet 1 where the product code doesnt exist in the list in worksheet 2. Can someone provide a outline for a macro to loop over sheet one and look up the value in worksheet 2 and delete the row from worksheet 1?
View 3 Replies View RelatedInsert Rows Within Loop Code
Apr 3, 2008I have a requirement where I have to add a row with x columns using vba. this is the code I am using now
k = 17
prodetails = .GetFieldValue("Product Details")
sSeats = .GetFieldValue("Seats")
If isRecord Then
While isRecord
Sheets("Products").Rows(k).Insert Shift:=xlDown
Sheets("Products").Rows(k + 1).Insert Shift:=xlDown
Sheets("Products").Rows(k + 2).Insert Shift:=xlDown
ThisWorkbook.Sheets("Products"). Cells(k, Prod6Col) = prodetails
ThisWorkbook.Sheets("Products").Cells(k, Unit4Col) = sSeats
isRecord = .NextRecord()
Wend
End If
In this code I have declared Prod6Col and Unit4Col as constants. instead I need to use them as variables like in this modified code. However if i use this code, I get an object definition error.
k = 17
m = 20 (20th column)
l = 18 (18th column)
prodetails = .GetFieldValue("Product Details")
sSeats = .GetFieldValue("Seats")
If isRecord Then
While isRecord
How To Loop Through Dynamic Ranges Using Columns Rather Than Rows
Jun 23, 2014I have a list of several hundred columns, beginning with column "G:G", with varying numbers of rows of data in column - each row dipicting a monthly data point. I'd like to average the numbers in each column (need to average over the appropraite time-frame) and compare that average with the corresponding average (same time-frame) for benchmark (column"F:F"). The problem is I don't have the same number of data points in each column; some have data points for every month for the past 33 years, and some just a few years; almost all have differing beginning and ending dates as well.
[Code] ....
Rename Sheets By Using Dynamic Loop For Rows?
Jan 30, 2014 In column C I got some data like this:
Number of .csv
01
02
03
04
Number of .csv
05
06
07
08
Notice that there is an empty cell in between.The data starts at C12 up to C21. The data is in Sheet2.There are also 8 more sheets( Sheet3 to Sheet10). I want to rename each sheet, starting from Sheet3 according to each cell. For example the Sheet3 to be renamed to 01, Sheet4 to 02.
What I can do is something like this:
[Code] .....
And repeat this code for every block of data I got by changing everytime the i and the a. But this method is not so optimized because there are cases that the number of rows for each block is not the same and I have to change everytime the i counter. Is there any way to do 1 loop for all the sheets using maybe Worksheets.Count and another dynamic loop for the rows ? The data always start every 6 rows eg( C12, C18 etc). Also I was thinking to define an integer representing the number of rows for the loop...
Delete Over 3000 Rows In Worksheet Without A Loop
Nov 15, 2008I have anywhere from 3000 to 10000 rows to delete in a a number of worksheets, but would like to avoid using a loop as even with onscreen update turned to off like this:
View 3 Replies View RelatedLoop Instructions For Number Of Active Rows
Nov 20, 2008First: I am using following loop code to repeat until the last row with data in column B has been reached. I keep getting a compile error and can't figure out to to fix it. The compile error occurs on the ".cell" and ".range" portion of the code and has indicated an invalid or unqualified reference.
Second: Once I have the loop working, I need to reference different cells each time through the loop. The first time through the loop I need to reference cells B2 and C2....the second time cells B3 and C3.....and then B4 and C4....and so on. I am increasing the value of i each time but when I ran the code, I was not getting any results.
Loop Through Rows And Return Matching Columns
Jan 9, 2009I have a worksheet with 2 columns. The first column contains names and the second column contains numbers associated with the name.
How can I specify a name, go through the sheet to find all the occurances of that name and then paste all the numbers associated with that name in another worksheet in a set position.
Loop Skipping Random Rows For No Reason At All
Apr 15, 2009My sub is supposed to take the values from Sheet1 and paste them into 16x10 tables on Sheet2. However, for some odd reason, the loop is skipping some rows. If you take a look, there are 2184 values in Sheet1, but only 1368 end up in Sheet2...SKUs such as 518166,518167,510573,513746,513752 are just being skipped for no reason.
View 2 Replies View Related
