I have this piece of code which just copies every 3rd cell in column B from sheet1 and pastes it going down column A in sheet2. This works fine for me.
Code:
Sub Macro1()
Dim FirstCopy As Integer
Dim FirstPaste As Integer
FirstPaste = 1
For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3
If Range("B" & FirstCopy) "" Then
Range("B" & FirstCopy).Select
Selection.Copy
[code]....
However, now I want to copy every third cell from columns B, D, and F in sheet1 and paste them going down columns A, B, and C in sheet2. When I run the code below I am receiving this error: "Compile error: Wrong number of arguments or invalid property assignment"
Code:
Sub Macro1()
Dim FirstCopy As Integer
Dim FirstPaste As Integer
FirstPaste = 1
For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3
I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.
However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range Dim TotalRows As Long TotalRows = Cells(Rows.Count, 1).End(xlUp).Row For Each CELL In Range("C1", "C" & TotalRows) CELL.Select 'Code here to delete a row based on criteria Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I'm trying to speed up my work in excel. I need to fill some cells in first range to get + values in 2nd range. Loop seems to be best way for it, but i'm not to good in VBA. In attached file you can find 3rd worksheet. Loop must go thru all cells in range B25:AN32 and change related cells in range B15:AN22 until cell value in bottom range will be > 0.
There is also 2nd problem I'd like to solve. In sheet KANBAN I've got simillar situation, but now i need to paste text into green range, to get values in bottom range until.
Both loops must run from top to bottom, column by column.
What would be a good way to increment each of my ranges for example I need x to copy Range B11:to G20 and paste it to C10 for the second loop. Each Variable has different increments.
I'm horrible with Visual Basic.
Sub Macro5() ' ' Macro5 Macro ' Dim i As Range, j As Range, k As Range Dim x As Range, y As Range Dim Num As Integer
I have a table sorted on column A. I need a macro to go row by row on that list and stop when the NAME (column A) is changed, in this example 3 first rows "aa". then I need to define the range of these 3 rows (A2:D4) in the table and make some subroutine. After finishing with this range I need the macro to continue and find the next rows with the same name, define the Range and go to the subroutine (in my example A5:D5)
The next range will be A6:D7 and so on until last range A27:D27. How can it be done?
I tried some CASE, FOR NEXT, DO UNTIL loops to do this but get stuck.
DATA *ABCD1NAMEDATEALERTTEST 2aa10HB3aa20INR4aa41WBC5ww50ELE6zz30DIG7zz61HYD8dd21CRE9dd41PLT10dd60HB11dd71INR1 2rr10WBC13tt20ELE14tt41DIG15yy40HYD16uu51CRE17ii20PLT18ii31HB19ii51INR20ii70WBC21ii80 ELE22oo20DIG23ll11HYD24ll20CRE25ll30PLT26mm21HB27nn30INR
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro() Dim lastRow As Long Dim i As Long
I'm trying to define some ranges with a loop but being a newbie at VBA I'm finding it difficult to solve the error in the code. First, as the data area is uncertain (variation in the number of rows and columns) i look to the end of the entire data area. Then i want to define intervals of 250 rows with a 30 row difference between each of them. Here is my
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code: Sub x() Dim rngTemp As Range Dim rngFind As Range Dim rngFirst As Range Dim rngLast As Range Dim nom As Range Dim strFirstAddress As String
I have a report that contains several rows of data. This data is separated by page breaks, so for example, there could be 1500 rows, separated into 90 pages by page breaks. Each range may have anywhere between 35 and 45 rows, but some of those rows may contain no data.
I would like to loop through the cells column A, look for a certain criteria, then delete the range around that certain cell that is contained within the page breaks.
I have code that will loop through the cells in column A. I also managed to create code that will delete a set range but since the ranges aren't always a uniform number of rows I need another fix.
I have a list of several hundred columns, beginning with column "G:G", with varying numbers of rows of data in column - each row dipicting a monthly data point. I'd like to average the numbers in each column (need to average over the appropraite time-frame) and compare that average with the corresponding average (same time-frame) for benchmark (column"F:F"). The problem is I don't have the same number of data points in each column; some have data points for every month for the past 33 years, and some just a few years; almost all have differing beginning and ending dates as well.
loop that can calculate the median of dynamic ranges. I need to run through all columns and for each column find the the ranges (there are more ranges and they are seperated with a blank row) with numerical data and then calculate the median and thereafter continue down to find the next range with numerical data in that row and so on.
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"), Sheets("Sheet1").Range("C7").End(xlDown)).Copy Sheets("Sheet8").Range("A5").End(xlDown) End If
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click() Sheet7.Activate Run "HorizontalPrintStuff" 'generic landscape pagesetup With ActiveSheet.PageSetup 'specific pageset settings .RightFooter = " Construction Assumptions" .PrintArea = "CONSTRUCTION" 'the named range to print .Zoom = False .FitToPagesTall = 1 .FitToPagesWide = 1 'this changes depending upon the page selected End With ActiveSheet.PrintOut End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate 'Sheet3.ResetAllPageBreaks 'disabled due to errors Run "HorizontalPrintStuff" 'generic landscape pagesetup With ActiveSheet.PageSetup 'specific pageset settings .PrintArea = "DEVBGTALL" 'the named range to print .FitToPagesWide = 4 'this changes depending upon the .FitToPagesTall = 1 End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
I am trying to create an IF function and how to create it for multiple ranges. The for the following criteria is what I am trying to work with: If a checking balance is $500 dollars or below return "low", If it is between 500 and 2000 return "Medium", and IF greater than 2000 return "high"
I am trying to combine three IF formulas that depend on ranges that vary. I think the attached sheet does a much better job of explaining what I am looking for than I can do.
I have a list of grade from 2~4 (i have long list but for sample i made it short). I want to get average of all grades one by one as well as by making some groups. Like 2,3, "2~4" (all groups) then "3~4". All the things were going nicely with a drop down menu. But when i put average on grde "3~4" only then the problem occurred. Although I've done my work but still I think there must be some improvements.....
Quick question: When using "With" is it possible to specify 2 ranges, or will I need to do 2 different with blocks? The reason I say not using Union is because I need my ranges seperate. I run 1 set of commands on Range 1, and 1 set of commands on both Range 1 and 2.
I am trying to use an ActiveX CommandButton on Sheet40 to do the following:
Sheet40 (E31:AN39) = sum of (E31:AN39) for sheets 6-15 PROVIDED that cell D3= "y" in those sheets
So the steps are: (1) Among sheets 6-15 select those in which cell D3 = "y" (2) Set the range of (E31:AN39) in sheet40 to the sum of the same range in the selected sheets
ie cell E31 = sum of cells E31 in selected sheets... cell E32 same... cell AN39 same
I have 2 ranges which on their own seem to work fine (I have check by just putting ".Select" at the end of both of them). The issue is that I want to apply the same border format to both ranges, however, when I try to put them together in a "With" statement it includes all of the range from the top to the bottom and not just the 2 two ranges. Ranges being used:
I am getting a NEXT without FOR error message when i try to run this code. This is the portion of sub im having trouble with.. been trying to work it out but to no avail. I thought that i might have to do Next Ccell, though I got the same error.
I am trying set up my spreadsheet so that when a number is put into one column. The next column is filled with a number that will correspond to the other number specified from a range of data.
Distance Sheet no.
55
68
93
135
186
So in the sheet No. column I want it to read the number in the Distance and put in the Corresponding sheet number.
So if:
Sheet 1 is : a distance of 1 though 20 Sheet 2 is : a distance of 20 though 40 Sheet 3 is : a distance of 40 though 60 Sheet 4 is : a distance of 60 though 80 Sheet 5 is : a distance of 80 though 100 Sheet 6 is : a distance of 100 though 120 Sheet 7 is : a distance of 120 though 140 Sheet 8 is : a distance of 140 though 160 Sheet 9 is : a distance of 160 though 180 Sheet 10 is : a distance of 180 though 200
How can this be automated without writing a ton of nested if statements.
This is an example but in reality I have 29 "sheets" with different ranges to separate.
