Using For-loop To Name Ranges

Jan 6, 2010

1. insert a new procedure and put this code into a for loop:

View 2 Replies


ADVERTISEMENT

Loop Through Cells And Ranges Reverse Order With Backwards Loop

Aug 30, 2006

I am looping through each cell in a range and I would like to loop in reverse order.

Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next

I have tried:

For Each CELL In Range("C" & TotalRows, "C1")

and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.

View 7 Replies View Related

Loop Thru Two Ranges

Jan 19, 2010

I'm trying to speed up my work in excel. I need to fill some cells in first range to get + values in 2nd range. Loop seems to be best way for it, but i'm not to good in VBA. In attached file you can find 3rd worksheet. Loop must go thru all cells in range B25:AN32 and change related cells in range B15:AN22 until cell value in bottom range will be > 0.

There is also 2nd problem I'd like to solve. In sheet KANBAN I've got simillar situation, but now i need to paste text into green range, to get values in bottom range until.

Both loops must run from top to bottom, column by column.

View 13 Replies View Related

Increment Each Of Ranges Loop

Jan 9, 2012

What would be a good way to increment each of my ranges for example I need x to copy Range B11:to G20 and paste it to C10 for the second loop. Each Variable has different increments.

I'm horrible with Visual Basic.

Sub Macro5()
'
' Macro5 Macro
'
Dim i As Range, j As Range, k As Range
Dim x As Range, y As Range
Dim Num As Integer

[Code]....

View 1 Replies View Related

Macro To Loop Over RANGES

Aug 3, 2012

I have a table sorted on column A. I need a macro to go row by row on that list and stop when the NAME (column A) is changed, in this example 3 first rows "aa". then I need to define the range of these 3 rows (A2:D4) in the table and make some subroutine. After finishing with this range I need the macro to continue and find the next rows with the same name, define the Range and go to the subroutine (in my example A5:D5)

The next range will be A6:D7 and so on until last range A27:D27. How can it be done?

I tried some CASE, FOR NEXT, DO UNTIL loops to do this but get stuck.

DATA *ABCD1NAMEDATEALERTTEST
2aa10HB3aa20INR4aa41WBC5ww50ELE6zz30DIG7zz61HYD8dd21CRE9dd41PLT10dd60HB11dd71INR1
2rr10WBC13tt20ELE14tt41DIG15yy40HYD16uu51CRE17ii20PLT18ii31HB19ii51INR20ii70WBC21ii80
ELE22oo20DIG23ll11HYD24ll20CRE25ll30PLT26mm21HB27nn30INR

View 7 Replies View Related

VBA For Loop With Multiple Ranges

Oct 19, 2012

I have this piece of code which just copies every 3rd cell in column B from sheet1 and pastes it going down column A in sheet2. This works fine for me.

Code:
Sub Macro1()
Dim FirstCopy As Integer
Dim FirstPaste As Integer
FirstPaste = 1
For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3
If Range("B" & FirstCopy) "" Then
Range("B" & FirstCopy).Select
Selection.Copy

[code]....

However, now I want to copy every third cell from columns B, D, and F in sheet1 and paste them going down columns A, B, and C in sheet2. When I run the code below I am receiving this error: "Compile error: Wrong number of arguments or invalid property assignment"

Code:

Sub Macro1()
Dim FirstCopy As Integer
Dim FirstPaste As Integer
FirstPaste = 1
For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3

[code]....

View 2 Replies View Related

Naming Ranges Using Vba And Loop

Sep 12, 2007

I would like to name ranges in column v of worksheet 'dispatch' using vba as follows

name the range v17:v64 as day1
name the range v65:v112 as day2
name the range v113:v160 as day3

this must repeat 365 times (i.e. for each day of the year)
note that the each range has 48 rows

View 9 Replies View Related

Loop Defining Named Ranges

Nov 23, 2009

I'm trying to define some ranges with a loop but being a newbie at VBA I'm finding it difficult to solve the error in the code.
First, as the data area is uncertain (variation in the number of rows and columns) i look to the end of the entire data area. Then i want to define intervals of 250 rows with a 30 row difference between each of them. Here is my

View 9 Replies View Related

Creating Named Ranges Using A Loop?

Nov 2, 2011

i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?

I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.

Code:
Sub x()
Dim rngTemp As Range
Dim rngFind As Range
Dim rngFirst As Range
Dim rngLast As Range
Dim nom As Range
Dim strFirstAddress As String

[code].....

View 2 Replies View Related

Loop And Delete Ranges Between Page Breaks

May 14, 2013

I have a report that contains several rows of data. This data is separated by page breaks, so for example, there could be 1500 rows, separated into 90 pages by page breaks. Each range may have anywhere between 35 and 45 rows, but some of those rows may contain no data.

I would like to loop through the cells column A, look for a certain criteria, then delete the range around that certain cell that is contained within the page breaks.

I have code that will loop through the cells in column A. I also managed to create code that will delete a set range but since the ranges aren't always a uniform number of rows I need another fix.

View 8 Replies View Related

Loop Through Ranges To Create Multiple Charts?

Apr 2, 2014

I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.

However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").

[Code] .....

View 1 Replies View Related

How To Loop Through Dynamic Ranges Using Columns Rather Than Rows

Jun 23, 2014

I have a list of several hundred columns, beginning with column "G:G", with varying numbers of rows of data in column - each row dipicting a monthly data point. I'd like to average the numbers in each column (need to average over the appropraite time-frame) and compare that average with the corresponding average (same time-frame) for benchmark (column"F:F"). The problem is I don't have the same number of data points in each column; some have data points for every month for the past 33 years, and some just a few years; almost all have differing beginning and ending dates as well.

[Code] ....

View 9 Replies View Related

Loop Through Specific Ranges From All Sheets To Summarize Data In Report Sheet

Jul 1, 2012

i attached link to sample and its contains employee sheets and Report sheet ,and in Report sheet there is comment

[URL]

View 7 Replies View Related

Loop Through Rows To Calculate Median For Several Dynamic Ranges With Numerical Data

Jul 6, 2006

loop that can calculate the median of dynamic ranges. I need to run through all columns and for each column find the the ranges (there are more ranges and they are seperated with a blank row) with numerical data and then calculate the median and thereafter continue down to find the next range with numerical data in that row and so on.

View 4 Replies View Related

Loop Within A Loop (repeat The Loop Values)

Mar 31, 2008

With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).

I have a named range called 'territories' that contains the list of X101 -> X152.

I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!

View 9 Replies View Related

Move Ranges To Corresponding Ranges Based On Column Having Data

Oct 25, 2007

I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.

View 5 Replies View Related

Loop Through Multiple Files And Call Macros (but Unable To Loop)

May 14, 2014

Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.

Why it stops after one file when using "Application.Run..." to call the macros?

NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.

Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long

[Code]....

View 4 Replies View Related

Store Row Number Within Loop And Delete All Stored Rows After Loop?

Sep 11, 2013

I have working code that returns a row number within a for loop based on parameters I set.

Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.

Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*

Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.

All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.

View 4 Replies View Related

Copy Cells In Loop Based On Loop Increment Being Multiplied

Feb 7, 2008

I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,

View 3 Replies View Related

Loop Through Index Worksheets Using For Loop And Select Clause

Nov 4, 2013

I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.

I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.

Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet

[code]....

View 2 Replies View Related

Avoid Changing A Loop Counter Within A Loop?

Oct 24, 2009

I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.

The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.

Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?

View 3 Replies View Related

Static Ranges And Dynamic Ranges

Feb 26, 2010

definitions for static ranges and dynamic ranges?

View 9 Replies View Related

Copying From One Loop To Paste Into Another Loop?

Aug 27, 2012

I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.

For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)

text
1
text
text

[Code]....

View 5 Replies View Related

For Each Loop To Delete Row W/ Value (Loop Backwards)

Aug 2, 2007

For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,

Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")

For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c

View 9 Replies View Related

Nested Loop. Inner Loop Not Running

Nov 30, 2006

i have a problem with a nested loop:

it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.

am i doing something wrong?

dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================

Sub new2()

Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant

r = 1 ..................

View 9 Replies View Related

2 Input Vertical Ranges Need Formulas To Output 2 Vertical Summary Ranges

Mar 7, 2013

I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.

"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"

A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model

View 1 Replies View Related

Copy Ranges & Add Them To Other Ranges

Nov 1, 2006

In the attached file, I have variable range in column A:B, column C:D and in column E:F

I want a macro to do the following:

Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.

Then in sheet A, simply copy the available range in column B and paste it in sheet B

Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.

I know the macro code for the simple paste. But I am struggling with the paste special code.

View 9 Replies View Related

Define Only 2 Named Ranges From List Of Named Ranges

Apr 28, 2014

I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.

However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.

What part of code do I need to change and to what to make it work for just 2 named ranges ?

View 6 Replies View Related

Do...Loop Error :: Loop Without Do

Dec 17, 2008

Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".

View 14 Replies View Related

Loop Inside The Loop

Apr 28, 2009

I have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3

here is my main loop A1 = 5000
and second loop need to run inside the this loop

Sheet1.Activate
i = Range("A1")

For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved