Loop And Find Text In Active Cell Then Store To Array
May 5, 2012
I am trying to loop through column A and I want to store in an array where I find "App" within the cell value. I am trying to find "App" but will store the whole cell value in the array. I could not figure out the Find method, so I tried the MID function but am having no luck.
Here is my code:
Code:
Sub Arraytest()
Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long
f = 0
lastrow = Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
ReDim arr(1 To 1, 1 To lastrow)
[Code] .....
View 1 Replies
ADVERTISEMENT
Nov 18, 2008
I want to perform some operations (basically a secondary filter) based on the values which are currently filtered within a single filter column.
.Autofilter.Filters(n).Criteria1
and
.Criteria2
are great, but what if there are more than 2???
i.e. I have a column containing values L01 to L20.
My column is filtered on L05, L06 and L07 (or some other combination).
I want to extract the values and L05, L06 and L07 and do what I will with them.
View 9 Replies
View Related
Jun 19, 2008
I would like to use array v to store all the results of the for loop u...How can Ido it?
Dim myRange As Range
Dim AnsRange1 As Integer
Dim AnsRange As Range
Set myRange = Application.InputBox(Prompt:="Select row to insert 10 rows below", Type:=8)
AnsRange1 = myRange.Row
Dim u As Integer
Dim v As Integer
Dim var() As Single
v = 0
For u = 23 To 24022 Step 9
var(v) = u
Next u
If Not (AnsRange1 = v) Then
MsgBox AnsRange1
Else
Range(AnsRange1 & ":" & AnsRange1 + 9).Insert Shift:=xlDown
End If
End If
View 9 Replies
View Related
Dec 3, 2008
i am not good in programming.In an outlook i am trying to write a maro.
I am reading lines from a text using readLine(), how i can store each line into an array using vbscript. I write the code as follows,
While Not F.AtEndOfStream
s = F.readline
Start = InStr(s, "@")
If (Start > 0) Then
- Here i need an array, when start>0 , store that line into an array
View 9 Replies
View Related
Jan 31, 2013
What I am trying to do is during a loop operation, which subtotals variable ranges, I want to store the locations of the cells that it puts the sum function into. I.E. if based on criteria it determines that range E4:E12 is summed into E13, I need to save E13 to use in a formula once I'm out of the loop. I don't know how many instances it will find and there's the possibility in the future that not only will the number of instances increase, but the location could always be different as well. Any way to do this without a million lines of code.
View 7 Replies
View Related
May 11, 2007
I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.
View 3 Replies
View Related
Mar 8, 2013
I have in column B, cells that have any number, one number or several like B2.
#
A
B
C
D
E
[Code]...
Thinking that I have a loop for rows 1 to 3:
When in column "A" is "No", I want to consider values in C and D to get:
Code:
a[1]=Cells(1,"C") & "-" & Cells(1,"D") & "-" & "ABC"
But when in column "A" is "Yes", I want to store in array each value within cell in B (in this example B2) to apply later a For/For Each
over each number (in this example are 3 values only within cell B2), something like:
Code:
a[1]=Value_In_B2[1] & "-" & "ABC"
a[2]=Value_In_B2[2] & "-" & "ABC"
a[3]=Value_In_B2[3] & "-" & "ABC"
View 6 Replies
View Related
Dec 16, 2008
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
View 5 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
Jan 14, 2014
I am having trouble using the find function. I need to store a date as a variable and then find this date on another worksheet. The date is in the following format:
dd-mmm-yy
This is what I currently have which gives me a run time error 91:
Code:
Dim DateSearch As Date
DateSearch = Range("C3").Value
Cells.Find(What:=DateSearch, After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
View 4 Replies
View Related
Aug 12, 2011
I've scoured the internet for this answer and have not found a formula that works.
I have a list of domain names/URLs in column A of workbook 1:
jhjh.com
hajfh.co.nz
123.123.12.12
I have a list of domain name extensions in workbook #2:
.com
.co.nz
.net
I want to determine if the cells in column A workbook one contain any of the strings in workbook 2 - note that I need to look at the string, not the entire cell in workbook one. If there is a match, true, if not, false for that cell within workbook one.
It's sort of a reverse array lookup with text. It seems that cross workbook and text is what causes the challenge.
View 9 Replies
View Related
Dec 19, 2006
1. Store the value in Cell A1 to a text file located in C: with name TEXTFILE.TXT (Replace the existing value)
2. Store the value to the text file as additional line item (append records)
View 9 Replies
View Related
Jul 17, 2008
I am trying to do is use a loop to store data from a range into a 3 or 4 dimensional Array and then output the data from the Array in another range. so for example the i want loop through the data in this range and store all data that is in account 701 into an array and then output this information in another range (tab). The data would have several different account but I only want to see one at a time.
Account Price Amount 701 150 1,000,000 701 125 250,000,000 701 3.25 6,000,000 702 4.25 25,000,000 702 2.35 3,600,000 702 2.55 10,000,000
View 9 Replies
View Related
Jul 30, 2012
I am trying to write a VBA procedure that uses nested For/Next loops to store the contents of a range in three worksheets to a 3 D array and then input the array into another location.
I have no problem doing this for a 2 D array, but am completely stumped on what changes I need to make in order to perform the same task on a 3 D array.
I will post my code for 2 D arrays below and will also post the uncompleted 3 D code, although, it is currently of no use because I am so lost on the 3 D array.
How do I reference sheet1,sheet 2 etc. when declaring my 3 D array? I know how to reference the rows and columns for my 2 D array by using the cells or range object, but what to do for the different sheets.
Two D Array:
Code:
Public Sub For_Next_Two_D_Array() Dim I As Integer
Dim J As Integer
Dim MyArray(4, 4) As Integer
For I = 1 To 5
For J = 1 To 5
MyArray(I - 1, J - 1) = Cells(I, J).Value
[Code] ........
Three D array:
Code:
Public Sub Store_ThreeD_Array()
Dim I As Integer
Dim J As Integer
Dim S As Integer
[Code] ......
View 6 Replies
View Related
Jun 23, 2014
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies
View Related
Apr 17, 2008
I can't quite seem to figure out the syntax for pulling a Range variable out of an array of type variant. I always seem to receive the error message "Object variable or With block not set", an example of my code as follows:
Dim currentRange As Range
For i = 2 To UBound(myArray)
currentRange = myArray(i)
' insert code here
Next
I have also tried:
Dim currentRange As Range
For i = 2 To UBound(myArray)
Set currentRange = myArray(i)
' insert code here
Next
Which results in the error "Object required". What is the correct syntax?
View 4 Replies
View Related
Jan 21, 2009
In an excel i have 3 columns they it contains around 12000 records
Group FA Title
A S1 bbbb
A M1 xxxx
A M2 eeeee
A S1 ffffff
A S1 pppp
A M3 aaaaa
A M2 ooooo
A M2 qqqq
A M1 ttttt
Here i need to get the unique FA, so i filter the column FA, my question is, After filter with FA column ,is there any way to store these unique FA(ie S1,M1,M2,M3) into an array using vba?
View 9 Replies
View Related
Apr 20, 2008
I have a list of names from cell A1:A10 in sheet "Input." Each of these names has its own corresponding sheet in the workbook. I want to be able to run the same exact VBA code for each sheet. In other words, I am trying to get my name variable to automatically change to the next value on sheet "Input." I'm sure this is pretty simple to do, but I can't seem to find anything that works!
View 5 Replies
View Related
Aug 30, 2006
how can i store the values of an autofilter's list in a array using VBA.
View 4 Replies
View Related
Jul 16, 2013
I'm looking for some code to loop through some rows of text and then if the text contains / replace that with a space. My code is below:
Code:
do until intdemandrow = 1
If InStr(Range(cells(intdemandrow, 1).Value, "/") Then
replace(cells(intdemandrow, 1).value, "/", " ")
intdemandrow = intdemandrow - 1
end if
loop
View 4 Replies
View Related
Nov 13, 2009
I am working with imported survey data - all the questions are sorted by columns with each respondent's answer in rows. One open ended question on the survey asks people in which states they have lived, so each response cell can contain multiple text values if they have lived in multiple states (and they often respond in full sentences - as in, "we lived in Texas for three years then moved to Arizona"). How do I search all the rows in that whole answer column to count all the mentions of each state? (To complicate matters, the search cannot be case sensitive - although I guess I could do a find and replace to fix the variance).
View 14 Replies
View Related
Dec 23, 2008
I have a macro which will import data to the worksheet, then perform some formatting on the data, then assign the month & job description based on the lookup table. The problem is that when I import in the data, the data in column B&C will be store as text instead of number and the date in column E will store a 2 digit year instead on 4 digit year which cause error to my macro. I have try to preset the column format to number, i even try to change the column format to number when i run the format macro data. But the problem is still there.
View 5 Replies
View Related
Jul 14, 2009
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
View 13 Replies
View Related
Jan 15, 2010
I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
View 10 Replies
View Related
Sep 28, 2009
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
WorkSheet 'Date Completed
ENTER Last 6 Digits of VIN:K43070Click
Here to Enter Date Completed
WorkSheet 'Date Completed
Colum A Column B...................
View 3 Replies
View Related
Jul 7, 2006
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
View 2 Replies
View Related
May 23, 2007
I am having problems getting a VBA search function to work... this is the code I am currently using with very little success:
Sub FindApp()
Selection.Copy
Sheets("Applications").Select
Cells.Find(What:="ADT32109", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
End Sub
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
View 8 Replies
View Related
Jul 31, 2012
I have a list of names in coloum D of a worksheet called "Trial", I have another worksheets called "Usage" with this list. I need a macro which can search the name written in Trial worksheet in Usage and worksheet, and activate the found results in usage worksheet.
I cannot use vlookup formulae here as "trial" sheet only has last names, which "usage" sheet has full names.
View 1 Replies
View Related
May 16, 2013
How to find the column based on my active cell...if my active cell is in A1 then it pops up saying your in column A.
View 3 Replies
View Related
