Find Active Cell Value On Another Sheet
I am having problems getting a VBA search function to work... this is the code I am currently using with very little success:
Sub FindApp()
Selection.Copy
Sheets("Applications").Select
Cells.Find(What:="ADT32109", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
End Sub
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Open Workbook, Find Sheet That Contains Cell Value From Active Workbook
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason... 'Dim officen As Integer 'Dim thiswb As Workbook officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls" Sheets("officen").Select RowCount = ActiveSheet.UsedRange.Rows.Count Range("B2").Select.............................
View Replies!
View Related
Find Active Sheet In A Workbook
I am creating a macro that will open another workbook and take all the contents off a page in it and paste the contents to itself. The problem is that sometimes those workbooks will only have one page and it will have the data I need, but sometimes there will be two or three pages in the workbook, but again, with only one sheet that has data on it. How can I have the macro find the one page with data on it?
View Replies!
View Related
Find Name Of Column Active Cell Is In
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far. Vent 01Vent 02Vent 03Vent 04 Date3/06/063/06/06n1/06/06 Tanker8248824617606 WhoJ AshJ AshEmptyHarry Date Tanker Who Private Sub DueCommandButton_Click() Dim strRecordID As Range Dim rngData As Range Dim Vents2 As Range, Tanker_Result As Range Dim wsheet1 As Worksheet, wsheet2 As Worksheet Dim Column_Name As Range Dim ActiveCell As Range Set wsheet1 = Worksheets("Sheet1") Set wsheet2 = Worksheets("Sheet2")....................
View Replies!
View Related
Find Method To Search For The Active And Non Active Values
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null. I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it. I've attached the spreadsheet so you get a better idea of the problem that i encountered.
View Replies!
View Related
Find Active Cell On Another Worksheet & Go To It
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File WorkSheet 'Date Completed ENTER Last 6 Digits of VIN:K43070Click Here to Enter Date Completed WorkSheet 'Date Completed Colum A Column B...................
View Replies!
View Related
Find Active Cell Value & Ignore Duplicates
I need to write a macro for find a value in all sheets in current workbook. The problem is put like this: I have to write a ID (for DVD archiving) in a column but testing that generated value is unique in entire workbook (I have multiple sheets, organized by movie genre). I can use find method and testing for value <> Nothing but it always said that the value is present (the current cell value); there is any method to omit selected cell value? I think "After:=" parameter can do this but I don't figure out how to handle with it...
View Replies!
View Related
Find Text Based On Active Cell Contents
I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.
View Replies!
View Related
Referencing Active Cell's Value From Another Sheet
I'd like for users to click in a cell in col A in a sheet named "Period7", have the cell value placed in cell C11 in a sheet named "Per7Report," and change the focus or active sheet to sheet Per7Report. Can this be done simply by clicking in a cell, or must a command button be inserted into each cell (note - odd rows only) in col A in Period7. on the code to do this? Note that there is a formula in col A in sheet Period7
View Replies!
View Related
From Cell In Sheet 2 Find Name In Sheet 1 And Value Offset
I am using Excel 2003, Windowx XP Professional, and Internet Explorer 7 In one Excel 3003 example workbook sheet1 contains data copied in from Internet Explorer 7 that keeps changing position on the sheet. From a cell, EG C5, in sheet2 I want to use functions to find a name in Sheet1 and pull the value on the same row say seven columns to the right back into sheet2 cell C5. My knowledge of Excel is very limited but this would seem to be a simple common thing to have to do, but have been unable figure it out. If this has been answered elsewhere I appologise, this is my first time to this forum which I found with google.
View Replies!
View Related
Macro Copy Of The Active Sheet And Then Rename The New Copied Sheet
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004'). "O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3)) Sub NewMonth() ActiveSheet.Copy Before:=Sheets(Sheets.Count) ActiveSheet.Name = Range("O4").Value ActiveSheet.Range("O4").Copy ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues End Sub
View Replies!
View Related
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Keep Hidden Sheet Made Visible As Active Sheet
I have a button on a sheet that runs a macro to unhide another sheet. That works, but I want the sheet made visible to remain forward. Instead, the button unhides the sheet and the sheet the button is on comes forward again. I am unable to figure how to keep the sheet made visible forward. Here is the macro 'as recorded'. Sub UnhideSheet1() Sheet2.Visible = True End Sub
View Replies!
View Related
Copy/Paste From Active Sheet To Another Sheet
I want to copy data from the current sheet, and past it in the "montly" sheet. 'i and j were defined above, with a Case statement Range(" Ai:Cj").Select Selection.Copy Sheets("monthly").Select ' I want the upper left cell of the pasted area to be A11 Range("A11").Select ActiveSheet.Paste I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
View Replies!
View Related
Find Active Printer
I have excel printing some sheets to pdf and it works fine on my PC. WHen someone else tries to print it wont work because they arent on "Adobe PDF on Ne02:"...they maybe on Ne03 or Ne08 or ne05...you get my point. I saw code on here before as to how to find the proper "port" but after a bit of searching, i cant find it again. Application.ActivePrinter = "Adobe PDF on Ne02:" ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _ "Adobe PDF on Ne02:"
View Replies!
View Related
Find Last Row In Non-active Workbook
I have a number of files which I am opening, manipulating and copying the result to a master workbook I am attempting to use code like this Selection.EntireRegion.Copy Destination:= Workbooks(Master). Range("A" & LastRow) Is it posible to define the value of LastRow without making Master the active workbook?
View Replies!
View Related
Find And Replace :: Cell Moving Down In Linked Sheet?
I have a spreadsheet which is linked to other spreadsheets. When I use "find and replace" on this spreadsheet, it causes one of my linked cells to move down one row. Why does it do this? This particular cell has nothing to do with the "find and replace" option. I have no idea how to stop this from moving this cell down.
View Replies!
View Related
Look Through A Sheet, Find A Text Reference, Then Bring Up Something In A Cell
I'm in the leadup to my A2 ICT controlled conditions piece where i have to make an Excel system. My chosen subject for this is to use the school house points system. I'm going to make a system where the results of house matches are inputted and points are awarded accordingly. I just have a couple of queries after looking at my initial designs. 1. Is it possible to get excel to look through a sheet, find a text reference, then bring up something in a cell located in the same row? For example, for it to locate one of the House team names, then go along the row and find the ammount of house points they have in order to make a total for them. Is this also possible over a number of sheets? (In order to keep a running total on a separate sheet). E.G. House, Games Played, Wins, Losses, Draws, House Points 2. For the house cross country event they use a different system which differs from everything i have designed. What i basically need to do is be able to use a drop down against each finishing position where you can select one of the four house teams, then it takes the points won for that finishing position and puts them into a table.
View Replies!
View Related
Check Only Active Sheet
I have this macro that looks in all sheets in column A, except the invoice sheet. How do I alter it to only check the active sheet? Dim ws As Worksheet For Each ws In ThisWorkbook.Sheets If ws.Name ("Invoice") Then On Error Resume Next With ws .Columns("A").SpecialCells(xlCellTypeBlanks).EntireRow.Hidden = True With .Columns("A").CurrentRegion .Offset(2, 0).Resize(.Rows.Count - 1, 3).SpecialCells(xlCellTypeVisible).Copy _ Sheets("Invoice").Cells(Rows.Count, "A").End(xlUp)(2) End With .Cells.Rows.Hidden = False End With Err.Clear End If Next ws
View Replies!
View Related
Jump To Last Active Sheet
Is there a way to create a macro to jump to the last active sheet? For example, the last sheet I was on was Sheet1 and now I'm on Sheet20 and I want to jump back to Sheet1 without scrolling through the tabs at the bottom of the screen.
View Replies!
View Related
Return To The Last Active Sheet
I have a spreadsheet that is nearly 100 worksheets. I am new to VBA and would like to put a button on each tab to return me to the last active sheet. I've tried other codes I've found on here but with no luck. I'm not sure if i'm posting them to the right area within VBA.
View Replies!
View Related
Find Specific Cell, Copy Row And Paste Into New Sheet
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G. Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
View Replies!
View Related
Sorting A Very Hidden Sheet That Is Not Active
I have tried to use absolute references (perhaps I didn't do it right) but it didn't work. Below is the code that does work but I need to first make the sheet visible then activate it. Sub Row_Sort(tmpsheet As String) ' Sort the first 4 columns of the tmpsheet sheet Dim tmprng As Range Dim OldActiveSheet As Worksheet ' Activate the desired workbook (in this case Linewkbk) Workbooks(LineWkbk.Name).Activate ' Save old active sheet Set OldActiveSheet = ActiveSheet.............
View Replies!
View Related
How To Run Macro From Active Sheet
I have written the below macro to copy data from a sheet called "Fixit Example 1" to a sheet called "Fixit Summary Example". It works fine, but I'd like to be able to run it from any "Fixit Example XX" worksheet. As written, the data is always copied from "Fixit Example 1" regardless of what worksheet I have open. I tried replacing Windows("Fixit Example 1.xls").Activate with Windows(Active.Worksheet).Activate but got an error "Run time error 424. Object required." Sub MoveData() ' ' MoveData Macro ' Macro recorded 18/03/2009
View Replies!
View Related
Vlookup Code For Non Active Sheet
I wrote this code today and it works - sometimes. Really it only seems to work when I have one of the sheets(zvur013) is in focus (ie, it was the last sheet to have been tabbed to). I dont understand what I'm missing, please help. Sub lookforitems() Dim items() Dim groupnums() Application. ScreenUpdating = False Set allitems = Workbooks("zvur013.dbf").Sheets("zvur013") Set allgnums = Workbooks("Groupnumbers.xls").Sheets("sheet1") Countgroups = Application.WorksheetFunction. CountA(allgnums.Columns(1)) countitems = Application.WorksheetFunction.CountA(allgnums.Rows(1)) ........................... allgnums.Cells(j + 1, i + 2).Value = x Debug.Print x Next j Next i End Sub
View Replies!
View Related
Save Active Sheet To Another Workbook
Copy the active sheet that is open in a work book and save it to another file with the date in the name? For example Report_11-03-08.xls The only problem I see with this. How could I also make it append a letter to report if the file already exits Example saved as Report1_11-03-08.xls. Then just continue incrementing. Sub CopySave() Application.ScreenUpdating = False ActiveSheet.Copy Application.DisplayAlerts = False ActiveSheet.SaveAs Filename:=ThisWorkbook.Path & "/" & "Report_" & Format(Date, "mm_dd_yy") & ".xls" ActiveWorkbook.Close Application.DisplayAlerts = True Application.ScreenUpdating = True End Sub
View Replies!
View Related
Reference Chart By Name That Is Not On Active Sheet
I am trying to select cells, tables and charts by just knowing their name. Thus if possible I would like to only refer to a chart by its name i.e. not know what worksheet they are on. This seems to work for named ranges of cells/tables, but not charts (I can't get my named charts to appear in the "Define Name" dialog). I found this code that loops through charts on the activesheet and shows the names. However, I would much prefer not to have to specify the sheet or to loop through all the sheets trying to locate the one with the named chart. Public Sub GetEmbeddedCharts() Dim myChart As ChartObject Dim myCharts As ChartObjects Set myCharts = ActiveSheet.ChartObjects For Each myChart In myCharts Debug.Print myChart.Chart.Name Next End Sub
View Replies!
View Related
Sort Range On Non Active Sheet
I'm trying to sort data on sheet1 and sheet2. I'm running all macros from sheet one and I need it to stay active all of the time. I'm using the following code to sort sheet2. When I sort the column on sheet2 with the code, I can not get back to sheet one without an error. Worksheets("Sheet2").Activate Columns("a:a").Select Selection.sort Key1:= Range("a1"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal I've tried Worksheets("Sheet1").Activate Columns("a:a").Select..............
View Replies!
View Related
Disable Right Click When A Sheet Is Active
I need to display Excel Sheet in a Browser and I want to disable the Right Click and Menu of Excel(File, Edit). So in the method Workbook_Open i coded following Private Sub Workbook_Open() Application. CommandBars("Worksheet Menu Bar").Enabled = False Application.CommandBars(" Cell").Enabled = False Application.CommandBars("Sheet").Enabled = False Application.CommandBars("Ply").Enabled = False Application.CommandBars("Row").Enabled = False Application.CommandBars("Column").Enabled = False End Sub Private Sub Workbook_BeforeClose(Cancel As Boolean) Application.CommandBars("Worksheet Menu Bar").Enabled = True Application.CommandBars("Cell").Enabled = True Application.CommandBars("Sheet").Enabled = True Application.CommandBars("Ply").Enabled = True Application.CommandBars("Row").Enabled = True Application.CommandBars("Column").Enabled = True End Sub It works fine, but if I open Excel application before viewing this HTML page(which contains XLS) and then the option are also disabled in Stand alone Excel application. I want to disable option when for this Sheet which is opened.
View Replies!
View Related
UDF #VALUE! Error On Non-Active Sheet
I have data that is laid out as follows: Date, amount1, amount2 and a value in $ There are many rows, and there will be more than one row for each date. see attached worksheet for an example. I want to create a table that will provide me totals of the amounts and the value for each date. I have managed to do this, using subtotals, but this gets quite slow, and in any case I want to be able to reference each of the subtotals with another sheet, so I tried to use pivot tables. I managed to do the above by using three pivot tables Date/Amount1 then Date/Amount2 and finally Date/Value, and hiding the extra two date columns. However my next table of data contains 10,000 rows and over 20 columns, so I am wondering if the above can be done within one pivot table. I know very little about pivot tables, and when I try to drop a second data item in, it always puts it below the first rather than in a separate column, and I get a table looking like the one in the attached worksheet. Am I doing something very basic, wrong? Is it possible to get a single pivot table, to look like my first summary chart in the attached worksheet. If I can do it with three columns, then I should be able to extend it to my much larger table of data.
View Replies!
View Related
Insert 2 Lines Under Line 6 In The Active Sheet
I have to do a large amount of routine work with a large number of sheets. I have tried to record some macros to do the job. First of all I would like to insert 2 lines under line 6 in the active sheet. I then need to drag the formulas found in line 6 down over the two new lines. Thirdly i would like to change the text string "xxx" in the formulas found in line 7 to "yyy"
View Replies!
View Related
Rename Embedded Active Chart Sheet Name
For example, a cell on the screen is blank. When the page is printed, the "blank cell" has printed text. I checked "format cells" and it shows word wrap, merge cells, and left to right. I was told to "un-merge" the cells. I did that and I still have the problem. The color on all the cells is OK at a blue shade. When I look at print preview the cells are blank, but when the sheet is printed, the text shows. Also, it looks like there are 2-3 cells inside the main cell. I hope I have explained this properly, it is not easy to use the correct language to describe since I am not very good at using Excel.
View Replies!
View Related
Set TextBox ControlSource To Non Active Sheet
I need to use the Textbox ControlSource in some forms to read specific data from worksheets, different source sheet for each form. How do I tell the ControlSource to look at a specific cell in a specific sheet, rather than just the active sheet? I want to do this using the properties of the Textbox rather than VBA.
View Replies!
View Related
Macro To Update Links In Active Sheet Only
I have a workbook which has links to another excel workbook (source). This workbook has many sheets -all exact copy- with different names. I changed startup prompt (edit->links) to "dont display the alert and dont update automatic links". Then I recorded a macro for updating links (from source) and assigned this macro to a button. What I want to do is when I click this update button I want links to be updated only on the active sheet that Im on. My problem is, when I press this button, it updates all links including other sheets (basically whole workbook). My current macro is (I dont know coding but I tried changing ActiveWorkbook to ActiveSheet but it didnt work): Sub update() ActiveWorkbook.UpdateLink Name:= _ "C:Documents and SettingsAlperDesktopExcelsource.xls", Type _ :=xlExcelLinks End Sub
View Replies!
View Related
Named Range That Refers To Active Sheet
is there a way to have the same named range cover a range of cells regardless of which sheet you are on? They seem to want to default to the page you are on. I want to make some VBA subroutines that will go over each sheet, and perform the same functions on each sheet. All sheets have the same format, but different data. I guess worst case scenario I can just break down and use multiple workbooks, but this seems a little less desirable. Should I be dividing this into seperate posts?
View Replies!
View Related
Copy Range Of Cells To Active Row In Second Sheet
Sheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View Replies!
View Related
Advanced Filter Active Sheet Macro Code
the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code? Sub myfilt() Application. ScreenUpdating = False If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData If Not (Range("indsignal")) Or Not (Range("countsignal")) Then Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _ Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False End If If Not (Range("indsignal")) Or Not (Range("countsignal")) Then Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _ Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False End If Application.CutCopyMode = False Application.ScreenUpdating = True End Sub
View Replies!
View Related
|
TRACKER
