Loop And Return To Previous Cell

Dec 2, 2008

I am trying to take a column of data located on one sheet and move into two different locations on another sheet. My range is from A1:A10. The below code works, but as it loops, it replaces G1 and H1 with the other values from the original range. Once the first pos and neg values are placed in G1 and H1 respectively, I want the next cells to be evaluated and placed in G2 and H2 etc. What am I missing here? How can I get it to stop pasting over itself?

Sub test()
Dim bcell As Range
For Each bcell In Range("a1:a10")
If bcell > 0 Then
bcell.Copy Destination:=Worksheets("Sheet2").Range("G1")
Else: If bcell < 0 Then bcell.Copy Destination:=Worksheets("sheet2").Range("H1")
End If
Next bcell
End Sub

View 9 Replies


ADVERTISEMENT

Going Back To Previous Cell Within Loop Macro

Jul 13, 2009

I need to copy a changing source cell, paste its value into another specific cell (always the same), and then return to the source cell for continued action (ie range selection, copy & value paste, which I can code).

This action is then followed in the next cell to the R of the first cell copied, etc to end of data. I can code the move to the R.

How do I return to the source cells as part of a loop?

Specific notes included in attached - I hope I've explained it clearly.

View 12 Replies View Related

Loop Deletes Previous Entries From Array

Oct 17, 2006

I think the loop is deleting my previous entries and only putting the last results in.

For assortedrowindex = 3 To 400
targetdate = Date
Do While Month(targetdate) = Month(Date)
Redim Preserve arrTransactions(assortedrowindex - 2)
arrTransactions(assortedrowindex - 2).CUSIP = Cells(assortedrowindex, 12)
arrTransactions(assortedrowindex - 2).OrderDate = Cells(assortedrowindex, 9)
arrTransactions(assortedrowindex - 2).BuyCurncy = Cells(assortedrowindex, 2)
arrTransactions(assortedrowindex - 2).SelCuurncy = Cells(assortedrowindex, 4)
arrTransactions(assortedrowindex - 2).Fund = Cells(assortedrowindex, 7)
arrTransactions(assortedrowindex - 2).SettleDate = Cells(assortedrowindex, 10)
arrTransactions(assortedrowindex - 2).BuyUnits = Cells(assortedrowindex, 15)
arrTransactions(assortedrowindex - 2).FxRate = Cells(assortedrowindex, 16)
If targetdate < arrTransactions(assortedrowindex - 2).SettleDate Then
' Sheets("Sheet2").Activate...............................

View 4 Replies View Related

VBA Code Overwriting Data Written In Previous Loop

May 9, 2013

I have amended the code below and have got it working. The problem I have now is that every time it loops it overwrites the data it wrote the previous loop

Offending line being ActiveSheet. Range ("A1: D30") = ValuesArray

I have known that somehow it should remember the last row and copy below this one but I cannot get it to work

Code:
Sub Basic_Example_1()
Dim MyPath As String, FilesInPath As String
Dim MyFiles() As String
Dim SourceRcount As Long, Fnum As Long
Dim mybook As Workbook, BaseWks As Worksheet
Dim sourceRange As Range, destrange As Range

[Code] ..........

View 1 Replies View Related

UDF Return Previous Value

Mar 4, 2009

is there a way for a udf to return the cell's original value instead of an error.

ie. the UDF in the cell returned a value from a database. now if i move the database and reopen this sheet, excel will try to recalculate and if it doesn't find the database it will return an error. instead of that i just want excel to return whatever was in the cell, before it had to be recalculated.

View 9 Replies View Related

Return Cursor To Last (previous) Location

Dec 30, 2008

I am familiar with the codes suggested here: http://www.eggheadcafe.com/software/...-previous.aspx

I move the cursor with Hyper-Links or just by clicking another cell.

I wonder - is there something I can add/do in order to enable returning from ANOTHER sheet !?

View 10 Replies View Related

Return Value Based Upon Previous Returned Value

May 24, 2006

We have a product plan, which we are trying to automate. To break it down we have a product number which will consist of several other components parts. In the product plan we are tying to automate showing which components are in constraint to the side of the complete part number. We've tried using VLOOKUP but it only ever returns the first value it finds, whereas we need to show all constrained parts. Have tried to break it down into ranges as per attached, but this is unreliable as the data is drawn from another source, and corrupts the ranges if re-imported or sorted.

View 4 Replies View Related

Return T If Any 2 Of The 3 Values From Previous Row Are Double Digits

Feb 7, 2009

Need a T/F formula that will return T if any 2 of the 3 values from previous row are double digits and the third digit is also from previous row. The 3 digits in the same row must have a zero.

Examples

668 T
806
995 T
509
995 F
519

******** ******************** ************************************************************************>Microsoft Excel - CASH 3 EVE COMBO GROUPS.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA3=ABCDE302/06/09006T402/05/09016F502/04/09110T602/03/09610F702/02/09661T802/01/09160FSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Keyboard Shortcut To Return To Previous Place In Worksheet?

Jul 18, 2013

What is the keyboard shortcut to return to your previous location in the worksheet?

View 2 Replies View Related

VBA Code To Return Previous Friday And Month Before Date

May 8, 2014

How to write a VBA code so that it would calculate the date of the previous Friday and from there Return the date exactly 1 month before; on any given day.

For example...
today is may 8th

So if I run the code the dates returned for last friday should be 05/02/2014
and 04/04/2014 should be returned AS the DATE exactly a month from 05/02/2014

View 6 Replies View Related

Macro: Return Previous Working Days Date

Dec 1, 2006

how do i get the previous days working date in VBA, how can i get VBA to determine wether we are in the week, and how will i get it to know its a monday to retrieve fridays date?

View 3 Replies View Related

Data Validation: If Previous Column Is Having A Value, Then Return FALSE Else TRUE

Jun 27, 2008

I am applying data validation in my workbook. The data in ColS consist of:

ColS
(Row2) X
(Row3) Y
(Row4) Y
(Row5) Y
(Row6) X

In ColT, I am to apply data validation: i.e. If in concerned row of ColS is having "X" value, then I am to show an error message. Else, values from A2:A5 should be shown in the as list and these should be accepted in ColT.

View 11 Replies View Related

Excel 2007 :: How To Return Previous Sequential Number From A Group

May 10, 2014

Windows 7, Excel 2007. a formula to find the next lowest sequential number within a group.

Here's an example data set, which represents transactions by date and category:

Col A is a user entered Date which will not be in chronological order (unfortunately a sort is not an option)Col B is a user entered CategoryCol C is a formula that gives the chronological sort order based on the date.

The formula in C2:C9 is =COUNT($A$2:$A$9)-(RANK(A2,$A$2:$A$9)+COUNTIF($A$2:A2,A2)-1)+1Col D is a formula to determine if the row is the first chronological transaction within the Category

The array formula in D2:D9 is =IF(MIN(IF($B$2:$B$9=B2,$C$2:$C$9))=C2,"Y","")

This might not be a necessary column, but can be used as a helperCol E is where I would like a formula to give the next lowest value in Col C for the Category in Col B (the order number in Col C for the previous transaction within the same category).

I have entered in the values that the formula should return in Col E in the table below

A
B
C
D
E

[Code]...

If the current line is the first transaction of the category, the formula should return the value in Col C for that line (so E2 would equal the value in C2, which is 2).

So the first part of the formula could be straightforward, using the helper column:
=IF(D2="Y",C2,

Here's the tricky part: If it's not the first occurrence of the category, then it should return the value of Col C for previous transaction (or the next lowest number in Col C that is within the same category).

E3 would return 4, since the previous transaction for Category A was line 9
C3 = 6, and of all the values of Col C for Category A (2, 4, 6, 8), 4 is the next lowestE4 would return 6, since the previous transaction for Category A was line 3 C4 = 8, and of all the values of Col C for Category A (2, 4, 6, 8), 6 is the next lowestE5 would return 1, since it is the first transaction in Category BE6 would return 1, since the previous transaction for Category B was line 5 C6 = 5, and of all the values of Col C for Catebory B (1, 5, 7), 1 is the next lowestEtc.

I'm thinking I need an array formula to find the minimum value within the category, where that value is less than the value of Col C in the current line. Just not sure how to write that...

View 9 Replies View Related

Find Last Previous Non Blank Value And Summarize Previous 6 Months?

Dec 10, 2012

see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:

Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012

View 7 Replies View Related

VBA - IF With LOOP To Return Values

May 31, 2012

1. look in column X to see IF there is an X
2. there's over a thousand rows to get through, and many of them have X's
3. IF the row has an X, I want to take some of the information from that row and transfer it into a new spreadsheet (the tricky part is I don't want to copy the entire row, but only certain columns in that row)
4. LOOP... so repeat for the next X down in the column X.... another tricky part is I don't know how to paste the information I want into 1 row lower in the new spreadsheet)

View 6 Replies View Related

Loop Through VBA Forms And Return Names

Nov 13, 2009

is there a way of looping through all forms that are in a VBA window and return their names and the controls within them?

View 2 Replies View Related

Loop To Return The First Number Of A Date

Jul 6, 2006

How can I use an if loop to return the first number of a date.

For example, if cell A1 has the date: 7/06/2006, I want to say:

If (ActiveCell.Characters(Start:=1, Length:=1).Text = "7") Then
TodayInt = 7
End If

But this is trying to look for a string and its finding a date, so I
get an error...

View 9 Replies View Related

Loop Return The Result Back In Row

Sep 21, 2009

Col ACol BCol CCol DCol ECol F
row 1811TAX CONSIDERATIONS1TAX CONSIDERATIONS
row 1911TAX CONSIDERATIONS#N/A
row 2011TAX CONSIDERATIONS#N/A
row 2121FLYING FALCON1TAX CONSIDERATIONS
row 2221FLYING FALCON#N/A
row 2321FLYING FALCON#N/A
row 2431IN COMMAND1TAX CONSIDERATIONS
row 2531IN COMMAND#N/A
row 2631IN COMMAND#N/A

I have 5 coulmns of data and in col F I have the following formula in row 18
=VLOOKUP(E18,$C$18:$D$800,2,FALSE)
the results come back " TAX CONSIDERATIONS"
however the same results comes back in row 21 and row 24......how can I modify this lookup to change when column B changes

View 9 Replies View Related

Loop Through Rows And Return Matching Columns

Jan 9, 2009

I have a worksheet with 2 columns. The first column contains names and the second column contains numbers associated with the name.

How can I specify a name, go through the sheet to find all the occurances of that name and then paste all the numbers associated with that name in another worksheet in a set position.

View 9 Replies View Related

Loop Through Directory And Return Path File And A Value

Mar 15, 2014

I need a macro to loop through a dir and the sub directories to find xlsm files, when it finds one open, go to the sheet named data, look at c1 and if the value is between 12.1 and 13.4 then i need it to write the file path, filename to a1 in my excell sheet and then write the value from c1 in the original file to A2 of line in my excel sheet.

I have hobbled pieces of code together without any good results.

View 2 Replies View Related

Loop Through Files, Match & Return Data

Oct 26, 2006

I found a use for the “Looping Through Workbooks” code (recommended by Dave in my last thread - thanks Dave).

I have a number of small files in "C:Files" that I’d like to loop through and find a match with data from a Master (in another folder) workbook as follows.

1. Match columns ”C” of each of the files with column ”H” of the Master.
2. For each matching cells, insert data from column “I” of the Master (“ Date” field) to into col “D” for each row of the individual files (about 300 rows)
3. Save & Close the workbook and loop to the next one in that folder

All that's needed here is code to search, match & paste, to insert into Dave's "Looping Through Files" code.

View 9 Replies View Related

Loop A Comparison And On Match Return Earliest Date?

May 25, 2012

Using online examples I am usually capable to reconstruct whatever I need. However, it's the combination of things I need to do now, which has left me banging my head on the keyboard for days now

Here's the data I am working with:

Sheet 1:

Sheet 2:

And here's what I need to get done:

From sheet 1, select first ID entry from Column A.Find matching ID in Column A of sheet 2On match, find in Column B the earliest date belonging to the concerned IDCopy that earliest date next to the corressponding ID in Column B back on sheet 1Return to step 1 and repeat for next ID entry. Do until end of list (sheet1)

So the result should look as following on sheet 1:

The major issue I am having is the combination of step 3 and 5. Because it probably means something like moving through an array that's within an array through which one is moving. And I am just missing that bit of experience that allows me to make that thinking step. I just keep falling off if you know what I mean...

View 3 Replies View Related

Loop Through A Column And Return Count Of Items Not In List?

Jul 16, 2013

I have data in range A2:E5000. Column D contains cost centers entered by users.

I also have a list of valid cost centers in range K1:K10.

What would be the vba code to check and return the count of the items entered in column D which are not valid, based on the list in range K1:K10?

View 1 Replies View Related

Populating A Cell With A Calendar Month Based On The Previous Date In Another Cell.

Jan 9, 2010

Trying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.

For example A1=01/01/2010

I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.

View 3 Replies View Related

Copy Data From Cell Only If Previous Cell Has Specific Text In It?

Mar 7, 2014

I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.

To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.

However, the sheet two only needs the names of the employees that belong to a specific client.

This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.

View 2 Replies View Related

Adding Timestamp And Username To Cell After Previous Cell Edited

Apr 24, 2014

Trying to get a record of who authorized spending in one of my worksheets and when they did it

I had some VBA code in one of my worksheets which added a time stamp and a user ID to two different cells after the user enters their name. Why it is no longer working, though I suspect after moving the worksheet around.

I would like my users to type their name into cell G65 (which is actually merged from G65-K65). Once the user enters their name, cell L65 (which is actually merged L65-O65) populates with the current time stamp. Also, when the user enters their name into cell G65, I would like cell P65 (which is actually merged into P65-S65) to auto populate. I would like this all of this to go down through line 70.

View 1 Replies View Related

Copy Formula From Previous Cell To Next Cell When I Enter Something

Sep 9, 2007

I want to copy formula from previous row to next cell when i enter something in perticular cell.
i.e

--Colomn A --- Colomn B -- --------Colomn C
1 01-09-07 ----- John ----------=vlookup(b2,$s$1:$t$10,2,false)
2 01-09-07 ----- Smith -------- =vlookup(b3,$s$1:$t$10,2,false)
3
4
5

Now if i enter date in cell A3 then cell C3 should be automatically filled/copy formula as celll C2. and so on......
then if i enter data to A4 then cell C4 should be automatically filled/copy formula from cell C3.

I have also attached example file.

View 9 Replies View Related

Go Back To Previous Cell

Sep 25, 2008

With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?

View 9 Replies View Related

Recording Previous Value In A Cell

Feb 23, 2003

I have a DDE-based worksheet, that is obtaining data from Townsend Analytics' RealTick Server software. One of my cells is a DDE formula that retrieves the current BID ask price, for a given stock.

When a new BID price comes in to my designated cell, I need to somehow capture the existing BID price, before this new one updates in the requisite cell. I want to be able to store this "old" value in another cell.

Unfortunately, there is no "pre-cell" event trapping. I've tried to work with the worksheet_change event, which passes an argument of the effected cells, but the cell value has already changed, by the time this event has been called.

This problem sounds simple, but I am at a loss for a solution. Does anybody out there in EXCEL-land have a solution ?

View 9 Replies View Related

Number Sequence: Add +1 To The Previous Cell

Nov 10, 2008

If I want to create a column of numbers, say 1 2 3 4 5, I can simply add +1 to the previous cell and then use "fill down" to generate my number sequence. How would one generate a column of numbers that repeat once? e.g.: 1 1 2 2 3 3 4 4 5 5, etc

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved