I'd like to start at the "Summary" sheet, then select next sheet.
If next sheet name is "End", then exit sub.
If not, then copy range(A1:D1), paste to the last blank row of the "Export" sheet.
Loop until "End" sheet is selected.
How do I add to this code?
In the attached worksheet I have UserForm2. When I click on open compare form button on the menu sheet it opens UserForm2, I would like the information I select in the first 7 combo boxes Vegetable - Ball on UserForm2 to loop through the data in the database sheet Columns A:G and compare the entries to the non empty/not blank cells in each row. If the form contain data that matches all the non empty/not blank cells in a row in the database sheet then it is a match and should show the label and display the message. If the form entries does not match to the non-empty/not blank cells in any of the rows on the database sheet then do nothing.
The problem I am having is getting it to loop through the sheet and bring back the right results. It is only matching on row 2 of the database sheet when I select cabbage in the vegetable combo box and apples in the fruit combo box . I cannot figure out how to get it to loop through all the rows for the range I want to compare (A2:G7) - I need this range to be flexible so as data is added it will expand to read all added rows.
The code is on the btnSave_Click() for UserForm2
I attached the spreadsheet and I am explaining what I want to do and the expected result.
Fruit
Fruit Type
Vegetable
Games
Toys
Cereal
Ball
[Code] .....
What I want to do is loop through the Database sheet and if the fields on the form contain all the values in any row of the Database sheet, excluding empty cells in the Database sheet, then display a message.
So if on the form I selected Broccoli fron the vegetable combo box, Cricket from the games combo box, puzzles from the toy combo box, bananna from the fruit combo box, grits from the cereal combobox, and baseball from the ball combo box, in the databse sheet tabel shown above the match would be row 6 since the values for vegetable, game, toy, fruit, cereal and ball on the form matches what is on row 6 of the Database sheet. It does not matter what other fieds are selected /filled in on the form, the match should only take into consideration the populated cell in each row of the database sheet.
So, if the user enters Apples in the fruit combo box and Cabbage in the vegetable combo box but had blank or something other than bike in the toy combo box on form it would be a match to the Database sheet row 2, regardless of what the user enters in the remaining fields on the form
If the user enters Berries in the fruit combo box, Blueberry in the Fruit Type Combo box, Carrot in the vegetable combo box, and Grits in the cereal combo box it would be a match to Database sheet row 3, regardless of what the user enters in the remaining field on the form .
If the user enters Apples in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form itwould be a match to the Database sheet row 5, regardless of what the user enters in the remaining field on the form .
If the user enters Grape in the fruit combo box, Carrot in the Vegetable combo box, Cards in the game combo box, and football in the ball combo box on the form it would be a match to Database sheet row 7, regardless of what the user enters in the remaining field on the form.
If the user enters Kiwi in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form it would NOT be a match to the Database sheet because the Database sheet does not have a row that contain Kiwi, Cabbage, and Bike.
So basically, if the entries on the form match the exact values for all the non-empty (blank) fields for any row in the Database sheet, then it is a match.
-If the entries on the form do not contain an exact match to all the non-empty (blank) fields for any of the rows in the Database sheet, then it is not a match.
-If it is a match show the label and display the message box
-If it is not a match the do nothing
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
How can i get this code to run through each sheet and place the value of the sum on its respective sheet in the same positon .....
Sub maths()
lr = Cells(Rows.Count, "E").End(xlUp).Row
Range("E" & lr + 1).Select
ActiveCell.Formula = Application.WorksheetFunction.Sum(Range("E2:E" & lr))
Selection.NumberFormat = "[h]:mm:ss"
End Sub
how can i use a for loop in an excel sheet. For eg.
A formula should check C1 to C500 and then if the condition matches print those values in B1 to B10
it seems REAL SIMPLE but I can't get this to work! It simply loops the code WITHIN the same worksheet, what am I doing wrong?
Sub loop()
Dim mywSheet As Excel.Worksheet
For Each mywSheet In ActiveWorkbook.Worksheets
*random code in here*
Next mywSheet
End Sub()
I'm trying to write some code that loops to take cells from Sheet 1 and puts them in Sheet 2, in a different order. I want to start working on row 11 of Sheet 2 and row 23 of Sheet 1. I have mRow = 11 but I can't figure out how to make nRow = 23 on Sheet 1.
View 9 Replies View RelatedI have a named range, "DDNames", on a master data input sheet and in that range are names of donors. In the same workbook I have sheets that provide a quarterly summary of each of the donors. I have named the sheets "Smry_Miller", as an example. Miller's name is in the named range, as well as others, for the format for each summary sheet is Smry_NAME.
I have a few things I want to do on each sheet so I am working on a FOR loop so I can make my code easily scale-able for when we get new donors or lose one. I get a Run-time error: 9 on my code and I'm just down right stumped.
VB:
Sub MakingLoop()
Dim arrAllDD As Variant
Dim i As Long
Dim varDDNum As Long
varDDNum = Range("DDNames").Count
[Code]...
The debug highlights the line "Sheets("Smry_" & arrAllDD(i)).Range("G1") = arrAllDD(i)"
I need to insert values from a column in one sheet to another sheet with a Loop mentioned here.
(I have attached a sample workbook for your kind reference.)
IN STATEMENT SHEET, I NEED TO INSERT (IN col F) THE VALUES from Col A of NOS sheet.THE INSERTION SHOULD BE LOOPED AS MENTIONED HERE
i.e. First time, it should be 1 to 10
Second time it should be 2 to 10 and 1
Third time it should be 3 to 10 and 1, 2
Fourth time it should be 4 to 10 and 1,2,3
Fifth time it should be 5 to 10 and 1,2,3,4…. And so on, till the last row with a value in ColA.
THE VALUES IN Col A of NOS Sheet MAY BE CHANGED WHENEVER REQUIRED. There it is 1 to 10, but it may be Alphabets or any other words also.
Hence, whatever values in Col A of NOS sheet should be taken for looping.
I keep getting errors with this vba code. I'm trying to make 10 new worksheets with the name of each worksheet in the Newname array. I'm trying to put the same formula (with the difference that each formula would take from a different "Newname" file. I'm trying to put first formula from A1 to A 560 and second formula from B1 to B 560.
Sub Namesheetformula()
For x = 1 to 10
Newname = Choose(x,"A","B","c","d","e","f","g","h","i","j")
Firstformula = if(isna(match('Master!'A1,'Newname'!A1:A560,0),"",'Master'!A1)
[Code] .....
I have an excel worksheet that has data in columns BA:CX. I want VBA to cut the data from the last row in the worksheet BA:CX and paste the data in the row below it's current location starting with column C:AY. I want to repeat the process for the next row up, etc. all the way until I get to BA:CX in row 2.
View 4 Replies View RelatedI have got an Excel program that retrieves colunms of data from a Database using MS Query on the first sheet of the workbook. I then have some code that abstracts the data from from the first sheet into each seperate sheet depending on the number value in the Family Groups column. This is all done using a loop.
This all worked fine until I tried to insert another sheet which contains a couple of columns of static values which I dont wish to be affected by the VBA loop. when I now run the code it overwrites the contents of this sheet.
May question is how can I put some code into my loop to prevent it from updating this sheet in the work book?
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
[Code] .....
I have a loop function that goes through a list of employees and i want to move their name to a different sheet(monday, tuesday...) so that I know who is in on what day. is there a simple way to have it add the next name to the bottom of the list?
View 3 Replies View RelatedI would like to loop through all spreadsheets in a folder, copy sheet "january" from each spreadsheet into a mastersheet. No idea how using vb all help appreciated.
i would like to change the name of the sheet to a cell reference before it gets pasted into the new sheet.
I have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province
Port_Of_Load
Port_Of_Discharge
BK_Client_Name
FF_BK_Name
VesselVoyage
GrossWeight
Export_Closing_Date_Yard................
I have a simple function that pulls in a single cell value, one per row, stores it in a property of a custom type, and then does a little more processing based on the value.
The custom type is GR, the property is CGID.
Code:
With Worksheets("Sheet1")
GR.CGID = UCase$(Trim$(.Range("CGID")(rw).Text))
End With
It runs fine with no noticeable performance changes up to around 10,000 records, but beyond that, it gets progressively slower and slower and slower until, at about the 20,000 record mark, it's processing at about 1/10 the speed it started at! (100 recs/sec instead of 1000+)
For testing purposes, all the cell values are the same, and are a small string value.
I know that hitting the sheet from VBA is time-intensive itself, so of course it makes sense that if I had two calls to the sheet, it would take twice as long to run the function as if I have just one. But this issue where the processing speed decreases as time goes on leads me to think there's some kind of garbage collection or memory allocation problem that I hope can be solved.
I need some code that will loop through all the images on a spreadsheet, and change the properties so the images will "Move and Size with Cells"
View 2 Replies View RelatedHow can I get this code to loop through every line on sheet?
Code:
Selection.Copy
Windows("SheetA.xlsm").Activate
Cells.Find(What:="Part Number", After:=ActiveCell, LookIn:=xlFormulas _
, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
[Code] ..........
I'm trying to write some code that links to certain sheets if certain cells are clicked. My sheets are named "01", "02", "03", ... , "20", ... "XX". I'm hoping I can use some loops to reference the names of the sheets since they are in a number format, but "j", which is how I tried to link cell rows with a corresponding sheet, in the code below doesn't cooperate. fix this or can you simply not reference sheet names this way?
If ActiveCell.Column = 4 Or 5 Then
For i = 5 To 7
j = i - 4
If ActiveCell.Row = i Then
Sheets("0j").Activate
Exit Sub
Else
End If
Next
Else
End If
I want to write a For loop so that it checks the range G2:R2 of Sheet1 for the first non-zero cell in that range. When it comes to the first non-zero cell, it will change the formula of A2 on Sheet2 to have the SUM of that non-zero cell and the next two cells to the right. Example:
SHEET1-
G2 = ""
H2 = ""
I2 = ""
J2 = "3"
K2 = "4"
L2 = "8"
M2 = "9"
N2 = "2"
O2 = "5"
P2 = "3"
Q2 = "11"
R2 = "7"
SHEET2-
A2 = SUM('Sheet1'!J2:L2) --->"15"
I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
Here is my code I got to work, however I have multiple excel files at a time.How do I not open the excel doc to run and add a loop to repeat the process for all files in the folder?
The MSG piece is critical and there is specific information needed in the body, can I add on to this?
CODE
------------------------------------------------------------------
Sub PDFEmail()
'Declare variables
Dim MyFilePath As String
Dim MyFileName As String[code]....
Sub DeleteSheetsPlease()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
Application.StatusBar = "checking " & ws.Name
[code] .......
This skips "Parameters" and "About", then it deletes a single sheet (that does not match "Parameters" or "About"),
BUT THEN IT STOPS, leaving "deleting [WSNAME]" in the appstatus. It's like it skips the "Next ws" statement altogether after deleting a sheet.
I want it to keep looping on all the sheets, but that delete action seems to kill the looping...
I have created a excel workbook in which I use for keeping up with storage unit rent. I have a tenant list sheet and each tenant has a sheet on which I keep up with charges and credits. What I want is a macro the will loop thru each tenants sheet based on tenant list and insert data and go to the next sheet. I found this on the web:
[Code] ......
I have built a sheet - sheet1 like this: It has 2 columns, header (line 1,9,19 etc...)and blank line (line 8,18,27 etc...) between groups. Groups are derived in the first column - Name.
What I'm trying to do is loop to take each group and copy it to a new sheet. Also it is necessary that the name of the new sheet will be derived from column A (A,B,C etc...).
NamePrice
A1,054,999
A1,132,500
A1,140,000[code].....
I need a macro that will look - this is hard to explain so will prob do wee diagram too but basically the macro nees to start looking at sheet2 A5 (the numbers start at A5 before that is text) see if it is greater than Sheet1 ColumnA & Less than Sheet1 columnB if the number is then I need Sheet2 ColumnD inserted into sheet 1 ColumnG. There is the text END on all columns on both sheets for the loop, the reason for the loop of course is there could be 100 lines in sheet2 ColumnA & I must look at all lines in sheet1 to see if it is greater than columnA and Less than ColumnB and if it is populate Column G.
Sheet1
Column A ColumnB ColumnG
Row 11 4000 4999
Row 12 5000 6099
Row 13 6100 7400
ETC
END END
Sheet2
ColumnA ColumnD
Row5 5130 134.58
Row6 6900 6400.00
ETC
END END
After the macro the result would be
Sheet1
Column A ColumnB ColumnG
Row 11 4000 4999
Row 12 5000 6099 134.58
Row 13 6100 7400 6400.00
END END END
Sheet2
ColumnA ColumnD
Row5 5130 134.58
Row6 6900 6400.00
END END
I'm looping through a sheet filtering it by different values. As of now I just have the same steps repeated 13 times. I want to do a loop instead. So my question is, how do I change the criteria of the filter? I want to perform the specific functions for each JD1 through JD13
Sub Full_S_BreakdownWIP()
jd1 = "FSC"
jd2 = "SA"
jd3 = "SC"
jd4 = "OA"
jd5 = "CA"
jd6 = "DC"
jd7 = "GCA"
jd8 = "PAR"
jd9 = "LG"
jd10 = "RA"
jd11 = "DM"
jd12 = "SR"
jd13 = "USA"
For i = 1 To 13................