First, I have to say that I am very weak in VBA.
I have a section of code where I need to count the cells from J through BF in rows 42 through 76. The code snippet I'm working on is:
Code:
For r = 42 To 76 Step 1
if Application.WorksheetFunction.Count(Range("J" & r:"BP" & r)) = 0 Then
Err = Err + 1
[Code]....
The code checker highlights the ':' in the 'Range .... = 0' with the message "Expected: list separator or )".
We are attempting to use the macro below.
We believe that the problem is "memory related."
However, we can't find the correct workaround to the issue.
In Excel 2002, the behavior was for the macro to work great on small numbers of rows, but to just stop on large numbers of rows. After it stopped, the user would manually run the macro throughout the spreadsheet, by holding down Ctrl + N.
In Excel 2007, the behavior of the program is different, and Excel actually freezes up.
We've narrowed down the problem to be possibly "memory related."
However, we don't know the correct workaround for this.
For example, in the posting below (the referenced link) they suggest using "variant arrays" to address memory limitations type of issues ... but I'm not sure of how to implement those.
I have a normally easy task that is causing me some grief. In column f of my data I either have a number or this "____________". My goal is to delete the entire row if that line is present but my code is not finding that value in my range.
I am wondering is this some format value or something, but it shows up in the formula line as a line. Doesn't appear to be an underline, but I could be wrong. Below is my code.
[Code] ........
I'm trying to build a function, but I haven't been able to successfully navigate some of the eccentricities of Excel formula-building.
Right now I am working on counting all of the cells that contain numbers (so likely just a =COUNT function), but will be eventually getting other descriptive stats as well. My problem is that I would like to create a formula that will perform the counting/mean calculation, etc., but only on a specific column that has the header cell that contains several specific words. Rather than having to type in the target words for each column, I would like to have the target words in the function be imported from multiple designated cells.
For example,
I want to find how many numbered cells are found in column E headed as "dog brown," but I also have columns headed as "cat brown" "dog black" etc. (which I will be using the formula on later) to paint a small picture, in my descriptive table, "dog" is in B31 and "brown" is in C30, then "cat" in B32 and "black" in D30.
Say the Range is (D3:M3) there is data in D3,F3,J3,K3,L3, and M3. I want to count consecutive cells with data from M3 backwards to D3. In this scenario the sum would be 4.
View 7 Replies View RelatedI have the below code which converts a range to PDF and saves it on our network drive. I would like to change my code to a loop so I don't have to do so much typing. There are 68 rows between each range.
VB:
Sheets("CPS CSR Dashboards").Range("A2:K69").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M3] & ".pdf"
Sheets("CPS CSR Dashboards").Range("A70:K137").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M71] & ".pdf"
A2:K69 is the range for Agent 1 which will be saved as as a PDF M3 is the cell which contains Agent 1's name for which the file is to be named.
A70:K137 is the range for Agent 2 which will be saved as another PDF M71 is the cell which contains Agent 2's name.
I'm working out of the book, and I'm close to what I need but at a beginner's block. I want to delete all rows of a table of stock information where the symbol (column b) contains a "."
Here's what I've got:
Sub Earnings_SymbsClnUp()
'Deletes the newly posted trades that have a "." in the symbol.
Dim finalrow As Integer
Dim i As Integer
finalrow = Cells(Rows.Count, 1).End(xlUp).row - 8
MsgBox finalrow
For i = finalrow To 9 Step -1
If Cells(i, 2).Value = "ITRA" Then
Cells(1, 2).EntireRow.delete
End If
Next i
End Sub
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I wanted to do a multiple return vlookup so I used an Index formula. I have account names and am trying to vlookup contacts associated with those accounts (4 max). So I have a list of Accounts all with 3 blank rows in between them.
How do I loop an array formula? So far I have the code..
[Code] .....
This finds the 4 contacts associated with the first account in C5 which I named the cell "myVar". I now want it to find the contacts associated with the accounts in C9, C13, C17 and so on until the first empty cell.
I have a database that needs breaking down in order to fulfill a request.
I've been trying to create a macro to copy one row to a new workbook (starting from row 3), file name save as a value of the cell (C1), and move onto the next row. However, my code appears to only loop through 26 entries and then stops.
Code:
Dim row As Long
Dim refname
row = 3
Do While Cells(row).Value ""
[Code] .....
I want to create a loop that goes down all the rows in my spreadsheet and does the formula (end/beginning -1) for all the rows of cells. The "end" cell is the cell that is the farthest right in the row (some sort of end.xlright) and the "beginning" cell is column D of the row that is being calculated.
View 4 Replies View RelatedI have to manually drag my formula for 121 cells and then change the formula by next column and/or row number.
Currently the 2 formulas I have are:
=IF(AND($Z$4>="", $AA$4>=""),H$6,J2456)
=OFFSET(X$5,0,(ROWS($1:1)-1)*2)
After every 121 cells that I drag these formulas to, in the first formula I change from H$7 to H$7 then H$7 then H$7 and so on
In the second formula, I change from X$5 to X$6 then X$7 then X$8 and so on.And also change the ROWS from 1:121 back to 1:1
Is there a formula which I can drag and it automatically changes the column and cell reference in the 2 formulas?
this is in reply with my previous thread I started regarding counting cells depending on dates. I am trying to loop between cells A19:A40 and perform some actions inbetween on each step. So, cell A19, do some work, then move to A20, and so on until it gets to cell A40, then it stops. I cannot work out the VBA for it.
View 4 Replies View RelatedIn my rows, I have 0, -1 and 1 and wanted to know how many 1s, 0s and -1s I have. So in the example below, there are 4 -1s, 4 0s and 3 1s.
-1
1
0
-1
1
0
-1
1
0
-1
0
I need to compare cells in two worksheets but with a difference ex:
Worksheet 1 contains merged/single Cells
Worksheet 2 contains single Cells
Now , i fneed to compare first merged/single cell in Worksheet1 with first single cell in Worksheet2 and similarly , second merged/single cell in Worksheet1 will be compared with second single cell in Worksheet2 and so on.........
Though i can use exact and compare them maually by specifying cells but since i need to make it general , suppose second time there can be some other combination of Merged cells I need to compare with Worksheet2 .
Is there an easy way of counting odd or even numbers in a row? I can't figure it out on countif, isodd, odd, count etc.
View 2 Replies View RelatedI am trying to find a way of counting decimal numbers if, say, they begin with 3.
For example, I might have 3.33, 4.1, 3.0, 5.65, 3.8, 3.7, 3.33, etc.
I want to count anything that begins with 3 (3.33, 3.0, etc). Using the data above the answer would be 5 ...5 numbers that begin with a 3.
If this possible?
There doesn't appear to be the facility with Countif. I don't want to truncate the data (the spreadsheet already is quite extensive). I have tried using =SUMPRODUCT((Y$2:Y$170 >=3)*(Y$2:Y$170<=3.9)) but this will return an answer only when there is a complete set of data within cells within the range.
I use the following formula to count duplicate random numbers on Row 35 that occurred on Row 34:
=SUMPRODUCT(--(D35:I36<>""))-SUMPRODUCT((D35:I36<>"")/COUNTIF(D35:I36,D35:I36&""))
I would like to continue to compare against Row 34 and count duplicates on other rows (ex. Row 36 or Row 37) one row at a time.
In addition is it possible to visually identify the duplicates through conditional formatting (ex. Bold or color change) or other ways?
I have an excel sheet that has the A column populated with many different things.
I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.
So...
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Would turn into
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
I have code which copies Range("A1") and pastes into Range("c1").Then it loops to copy a2,a3,a4 and pastes in the same cell c1.
I just want to copy a1 and b1 instead of just a1 and paste into cell c1& c2.Then loop to copy a2&b2 till end.
[Code] ......
I have a range of cells in F2:F30000 that I want to round to the nearest whole number.
How can I do that to the entire range of cells without looping? Every search I perform on the topic has a loop of some kind as a solution and my data set could be over 100k rows and speed is already a concern with the workbook.
how one can union a selection without looping through the cells? I need to write a noncontinuous range into an array, and it can't be sorted as I'm using specialcells(xlCellTypeVisible).
View 1 Replies View RelatedI've written a macro which searches the sheet for a value, when it finds the value it does something, then I want it to keep looping until it's done.
The issue is that Excel's find does not search first to last. Once it gets to the last, and you search next, it goes back to the beginning and finds the first cell.
In order to break out of the loop, I figured I should store the first cell found in a variable and then check inside my loop to see if I have got looped back to the beginning. If I got back to the first cell found, then I exit my loop and I'm done.
However, my code doesn't work. It exits the loop after a couple of iterations.
Sub Macro5()
'
' Macro2 Macro
'
If WorksheetFunction.CountIf(Cells, "TEST") = 0 Then
MsgBox ("Not Found")
Exit Sub
End If
Cells.Find(What:="TEST", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False) _
.Activate...............
I need a formula that will count the number of consecutive 3 0's from the following Data series. There are 22 such events.
0
6
15
[Code].....
i want Counting duplicate numbers in a string for example Counting 2
22241278-------- Count(2)=4
Is there a formula I can use to count the number of unique claim numbers in an excel column?
Is there a way that I can format a cell containing a number containing a decimal point to a number without a decimal point. Example, 205.55 to 20555
I wish to count the "number" of numbers in a cell i.e.
Cell A1 has the following data: 12 25 25
This should return 3
Simillarly 4546546545646456 1 2
Should also return 3
I will have data such as the above in a row so i need the count to be able to count a range as opposed to the single cell example above.
Furthermore I need a separate count to count the number or red numbers in a cell. Same parameters as above.
I have 2 Columns. One column represents calendar dates and the other column represents numbers between 0 and 7.
Therea re 10000 rows in this table.
I would like to count how many consecutive days I observe certain numbers numbers ( i.e 3+, 4+, 5+, etc)
I have a column that contains numbers relating to processing days. I need formulas that I can put into a results table that will show me processing timescales. I need to count up the number of 0s, 1s, 2s, 3s....9s and any numbers that are 10 and above. The column also contains #Value! errors and any formulas I have tried won't work with the error code and are also counting blank cells as 0 whereas I only want to count the cells in which 0 was typed in.
in a2:a277 i have numbers 1-10, randomly. in m2:m277 i have numbers 0-4, also randomly. i want to count how many of the 1s in column a have a corresponding 0, how many have a 1, how many have a 2, etc. if you just give me one formula i can manipulate it for all 40 outputs i need,
View 9 Replies View Related
