I'm trying to move data from a primitive user form to another sheet acting as a DB. I will further pivot the data in a third sheet to boil up results.
Here is the primitive user form - or desired data from the user form: ...
I've a workbook with two sheets 1)'weekly' and 2)'summary.'
Weekly is divided into products (up to a maximum of 8) with a fixed number of columns (4) directly below but a varying number of rows beneath as follows:
Product A (main header)
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
--couple of blank rows--
Product B
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
--couple of blank rows--
Product C
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
..etc...
This weekly data must be appended into each product's respective grouping within the 'Summary' tab. With the following small additions: 2 additional columns filled with the model and current week must be inserted beforehand:
Product C
Model|week|Issue|Serial Number|Analysis|Comments
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Summary page will contain the groupings of Product A through H. The weekly may only contain 1 (say Product D) in any given week, or all 8.
I realize there are more efficient ways of doing this, i.e. pivot tables, creating discrete tabs for each product, etc... but I've been tasked by the higher-ups to generate the above as I've laid out.
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
View 5 Replies View RelatedClicking the Add to DB button will add new items but not existing one.
now, what I want to do is to first, populate the existing TIN and then do the necessary update.
my basis for update is txtTIN.value
Here are the codes anyway:
VB:
'This adds the data on the WorkSheet named DBPIT"
Private Sub cmdAdd_Click()
Dim iRow As Long
[Code].....
I have an excel list of My Existing Customers and have recently purchased an excel list of all possible customers in my market that happens to have my existing customers listed in it as well. How can I remove my existing customers out of this purchased list so that I can import it into my Database as Prospects? I'm using Excel 2010. Deleting duplicates doesnt work for this. I want a function that looks at data in one spreadsheetA and if it finds it in the second spreadsheetB, it deletes the row out of SpreadsheetB.
View 9 Replies View RelatedI am trying to prepare a Worksheet that has an initial sheet which is a summary of all sheets, information on individuals and totals etc. This summary sheet will be added to over time. I would like it so that when I enter the details of a new individual on the summary sheet a new sheet is opened following a template with the details already filled in for that individual, and for the new sheet to be named with the individual's name. Ideally the new sheet would open automatically once the info has been entered, either that or a button to open the new sheet,
View 3 Replies View RelatedI have a download of public records from a local County Auditor, regarding property ownership. However, the data, as it is provided is incomplete. I have obtained, from another source, much of the missing data and would like to append the original data.
I don't know if this is even possible, but in 'Googling' it, I am optimistic.
I have attached an Excel 2007 spreadsheet with a sample of the County data on Sheet1 and the data that I would like to append on Sheet2.
Sheet1 lists the parcel number (A), and information regarding the last five recorded sales.
B: Sale Date
C: Deed Type
D: Buyer Name
E: Recording Number
F: Sales Price
G: Multiple Parcels ("Y")
H: Notes
I: Loan Information.
Then the B-I information is repeated four times (J-Q, R-Y, Z-AG, and AH-AO or also defined as columns 10-17, 18-25, 26-33 and 34-41) for a total of the last five sales.
Sheet2 is a listing of sales with similar information.
A: Sale Date
B: Parcel Number
C: Buyer Name
D: Sales Price
E: Recording Number
F: Deed Type
G: Multiple Parcels ("Y")
H: Notes
I: Loan Information
What I hope to do is this:
If the 'Recording Number' (E) on Sheet2 matches the 'Recording Number' (E) on Sheet1, then replace the eight columns on Sheet1 with the data found on Sheet2 (pertaining to a specific sale number).
If the 'Recording Number' (E) on Sheet2 does not match any 'Recording Numbers' (E) on Sheet1, replicate the (unmatched) data (from Sheet2) on Sheet3.
My hope is that this will give me updated, and more complete, data on Sheet1 and also show me all the data that did not match on Sheet3 for me to use later.
I have included headers on both sheets in hope of making things clearer to the reader.
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
I'm trying to set up a macro which will import data from one worksheet to a master sheet. I need it to copy the information into specific columns but not overwrite any existing information which is already in the Master Sheet, but I don't even know where to begin.
Just so you're clear on exactly what it is I'm trying to do... I have a Master Sheet which lists all of our suppliers prices, margins etc etc... However, when we use a new supplier we send them a greatly condensed version of the Master Sheet - We call it the Supplier Sheet (no big surprises there)!
When the supplier sends it back to me I have to type it all out manually which is kinda time consuming. I'd really like to set up a "push button" system which allows me to simply drag the Supplier Sheet into the workbook, add the info into the Master Sheet, then be able to delete the now useless Supplier Sheet.
(I have attached a test copy of the file - all of the columns in blue are the ones which need the data adding to).
how to search for this so I'm just gonna ask. See sheet below I faked the resulting formula I need) for reference.
We have an engineering database that spits out data. One of the things it spits out is a list of equipment tags along with its associate electrical drivers (I.e. motors) and details for each. I need to do some extra playing around with the official equipment list that we have to produce.
In a nutshell, if an equipment tag only shows FIXED in any of it's drivers, I want the formula to show nothing (blank). However, if the word VARIABLE appears in any of that tag's drivers, I want it to show VARIABLE. I know there's a formula involving IFs and whatnot, I just can't figure it out.
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1Equip TagDriver NameSpeed TypeFormula234-AG-900Primary DriverFIXED 334-AG-918Primary DriverFIXED 434-AG-932Primary DriverVARIABLEVARIABLE532-AG-931Primary DriverFIXED 632-AG-910Primary DriverFIXED 732-AG-911Primary DriverFIXEDVARIABLE8 2nd DriverVARIABLE 9 Tert Driver 1FIXED 10 Tert Driver 2FIXED 11 Tert Driver 3FIXED 1232-AG-916Primary DriverFIXED 13 2nd DriverFIXED 1432-AG-918Primary DriverFIXEDVARIABLE15 2nd DriverFIXED 16 Tert Driver 1VARIABLE 1732-AG-921Primary DriverVARIABLEVARIABLE1832-AG-922Primary DriverFIXED 1932-AG-923Primary DriverFIXED 2032-AG-924Primary DriverVARIABLEVARIABLESheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I'm trying to create a spreadsheet that will automate our job bidding process. We have alot of standardized phrases we use and I thought it would be nice to just click on the phrases that are pertinent to the user's current bid. How do I get the user's current selection (from a form, not a cell) to append itself to the "current" end of the bid (a worksheet)? In other words, previously entered information by the user (name, address, type of bid, etc.) is already updated on the new worksheet created by the new bid, but how do I get the user's current selections to find the end of what is already there, and add itself to the bid at that point?
View 9 Replies View RelatedI have a named range "ABC", range is ("A1", "A3", "A5"). Now I need to use Macro to extend the range to ("A1", "A3", "A5", "A7"), that is, adding "A7" to the existing named range "ABC".
View 1 Replies View RelatedCan I Restrict Excel Data Form only for appending new record. (No deletion allowed) and also Can I save Data Form in the File? Is there any way, whenever we open the file Data Form should popup?
View 9 Replies View RelatedI can't get the Displayalerts = False to work as it's supposed to when analyzing data running the correlation add-in. (ATPVBAEN.XLAM!Mcorrel)
For each loop the alert is displayed which I don't want it to.
The code below is just an example. I have several rows which I will loop through and therefore the Displayalerts=False must work.
Sub test4()
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
- Construct a macro to import a csv-file to my worksheet named "Info". The data in the .csv-file should start in row A5 in my worksheet.
- If the worksheet "Info" already has data, I want to overwrite the existing data with the new data starting in row A5
The directory of the csv-file is C:Testmycsvfile.csv
I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
I have a range of weekly data that I need to copy into another workbook, paste it below the data that already exists there and then delete the data from the original workbook. I would love to do this with vba but after hours of searching on how to do this my brain is frazzled.
I have 50 workbooks that I need to import weekly into one master sheet (Master.xlsm) but they need to be done individually after the weekly data has been checked. The master sheet will therefore have existing data and the new data needs to be appended at the bottom. Also column A will be blank in both workbooks so to find the last used row it will need to look in column B.
The number of rows in the weekly sheet will also vary rather than be a fixed range so I guess the last used row will also need to be found there too.
The attached file is a cut down version of my working file showing where the data starts on Row 14, I won't need to copy the headings.
Example file 21.03.xlsm
getting data externally from web and also keeping the previous data prior to the refresh.
My external table/data has 10 rows reporting values per day (10 days data table).
I can link the table to my sheet, however what I can not do is to create an offlinek, year to date table in the sheet which captures the rolling 10 days (everytime it is refreshed) without losing the prior days.
For ex:
External bank Data
Day Ratio
02/05/2014 0.15%
02/04/2014 0.13%
02/03/2014 0.14%
01-31-2014 0.23%
01-30-2014 0.16%
01-29-2014 0.16%
01-28-2014 0.18%
01-27-2014 0.19%
01-24-2014 0.19%
01-23-2014 0.21%
Above table changes on a daily basis, only reporting the last ten days.
How can I capture this data on a rolling basis, i.e. in a year to date format, so that everytime I refresh, the internal table gets updated with the new data.
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI have many rows of data 6 columns wide. I want to be able to enter data into a specific section, then run a macro to "cut-and-paste" that data onto the bottom of my existing data (with one empty spacer row between the new and existing data)
Here's what I have so far:
[Code] ....
Basically the part I need working on is changing [ Range("A101:F130").Value ] to be dynamic. For the code to determine the last row of data, move 2 rows down, and paste the block there.
I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?
View 8 Replies View RelatedMacro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I'm currently applying these formulae manually, and also instructing other people to do the same, due to my lack of understanding of macros. Hopefully someone can give me some instruction as to how to do this automatically. I'd like people to be able to open sheets sent as normal CSV's and apply a macro to get them into the right format, changing only rows with data in them.
These are the instructions I'm currently sending:
In cell n1 enter:
full phone number
in cell m2 enter:
=RIGHT("00000000" & J2,8)
Drag m2 to last record
In cell n2 enter:
=CONCATENATE(61,I2,M2)
Drag n2 to last record
In cell o1 enter:
Date of call
in cell o2 enter:
=DATE(MID(C2,7,4),LEFT(C2,2),MID(C2,4,2))
appending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
A1 cell ='9'!$D$9
A2 cell ='10'!$D$9
A3 cell ='11'!$D$9....etc
Is there any formula to append the Sheet number automatically (like dragging the shell) intead changing sheet number manually. because it is wasting so much time.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1