I need a macro… when I run the macro.. I want to create work sheet based in the shift time and copy entire row related to that shift time of all the cell to that particular sheet… there may be multiple rows related to same shift time but remaining data may be different..
View 9 RepliesI have a worksheet with a list of project managers and a bounc of data on them.
How can i make a new file with sheets for every project manager in the list and copy the data for each one into his own sheet ?
Every project manager has many lines (there are about 200 managers and 30 000 lines and 30 columns )
I have managed to create a sheets for project managers from a list of unique entries but that's all.
I have attached a file showing what I would need the output to look like. I need to know how to search a range of cells (in this case column E) and if the day of the week is Wednesday to copy that entire row to the Worksheet titled Wednesday. I would do it manually but I have several thousand rows of data to get through, and there has to be a better way.
Example.output.xls
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
computer just doesn't have the horsepower to run all of the sheets and the formulas and put them together on one sheet in the same workbook.
I was wondering if it would be possible to take the identically arranged sheets from one book and paste the VALUES over to One page in another book.
I'm guessing you'd need to know the directory of the workbook and the title?
Below is the macro i run to compile in to one page in same workbook: (Summary3 is an arbitrary name for the new page, HEADERS is the name of the page that holds the headers for all of the categories, 2014 URL, RAP and DB_Template are the three sheets that I don't want to copy in to this new page)
The headers are in each sheet from B2:DL2 and the data would be from B3:DL75.
I am looking for an update to the following macro that would paste all of the VALUES from each of these sheets in to a new workbook on a single page.
Sub CopyAll()
Dim ws As Worksheet
Sheets.Add.Name = "Summary3"
Sheets("Summary3").rows(1).value = Sheets("Headers").rows(1).value
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If ws.Name <> "2014 URL" And ws.Name <> "RAP" And ws.Name <> "DB_Template" And ws.Name <> "Summary" Then
Range("B2:DL75").Copy Sheets("Summary3").Range("B" & Rows.count).End(3)(2)
End If
Next ws
End Sub
I have a macro that will not complete, and I can not figure out why. The macro is CHECK_for_Sheets_THEN_Copy_DATA:
View 3 Replies View RelatedI have a list of regions in coloumn a) i need a macro that will create a new sheet within the excel document , and copy the entire row of data to the new sheet.
but it only creates a new sheet (named incidently the same as the region name) for different region names ?
ie.
australia data data data data data data data data
australia data data data data data data data data
USA data data data data data data data data
USA data data data data data data data data
USA data data data data data data data data
USA data data data data data data data data
France data data data data data data data data
for the above info there would only be 3 new sheets created within document .
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date
Reference no.
Name
Employee ID
16-Feb-12
S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
I have got the following code to fill series and someone please help me that how to use this macro I can enter thses code in sheet1 on enter event and the result iwill be displayed in sheet2 and if any duplication in series then it is copied in sheet3....
View 9 Replies View RelatedI need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
I want to make a mirror copy of worksheet so that i can use filter option more than one names for the same column and for same sheet.
View 5 Replies View RelatedI have a file that i import into excel as fixed width. this is done with the code i have already written. Now im at the point where i need to "pretty" up the report.
In colum A there are Account numbers.
My goal is to have every row with the same act copied to a new sheet, and have the sheet named after the common value in colum A.
once its done there should be roughly 10 to 15 separate sheets.
I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
I have a workbook which consists of 28 worksheets, all of which are protected, and are running on a code which automatically keeps all sheets at "unlocked cells" in the selection field. The sheet is also password protected for write-access…
I would like a Macro, or some sort of code, that when activated… it unprotects ALL sheets (which use same password), creates a folder on the users desktop, and saves a copy of the document in there… entitled "copy of {filename}" It must also remove the "write access" password…
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
Is it possible to have a macro create a hyper link once data is entered into specific cell, i have a multi sheet work book used as a stock card system.
Each stock item has its own worksheet and the product code is entered in to cell E3
(which in turn has a macro in it to change the sheet name to match the product code).
the macro also inserts a row of info into row 5 of another sheet used as a summary sheet ( CONTROL.SHEET or SHEET 4) using copy and paste link.
i need a macro to generate a hyperlink in cell D4 of the control sheet between the row info and the matching product code sheet ( the product code is displayed in cell E4 of the control sheet.
I only input one item at a time and then manually cut and insert the row info into the stock list on control sheet. so every time i input a new item, the row info is always in row 5 of the control sheet.
I'm trying to create a workbook with multiple worksheets. My first sheet to be named "Main" and each additional sheet to be named in sequence after the values in the cells between B5:B98 on !Main.
Example:
B5 = "01"
B6 = "01.1"
B7 = "01.2"
B8 = "02"
B9 = "03"
etc...
I'd like to have a macro that would take a worksheet in this workbook named "Template" and make a copy for each cell between B5:B98 and name that new worksheet "c" and then the value in each of those (B5:B98) cells.
Example:
First worksheet named "Main"
Second worksheet named "c01"
Third worksheet named "c01.1"
and so on.....
I am trying to further automate the process of formatting my financial statements and am hoping someone might get me on the right track here. Currently I create 2 sheets, one called "MMM YYYY" (i.e. month year) and another called "General Ledger".
The process I am currently doing manually is creating a link between each line item on the financial statement and its GL account information on the General Ledger tab.
The description of each line item on the financial statement (the MMM YYYY tab) matches the GL account description on the General Ledger tab with the exception that the GL account description starts with the GL account number and then the description.
For example the "Utilities" line item on the financial statement needs to link to a line on the General Ledger tab that is "7071-45 Utilities".
In my mind I see the macro saying go to the next line and read what it says. Now go to the General Ledger tab and look for something that says the same thing excluding any preceeding numbers and make a hyperlink.
If it helps, I've uploaded a sample of one of the statements as I currently do them with the hyperlinks already set up. There are not any macros in this spreadsheet. If you'd like to take a look at it, you can get it here: ....
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT()
Dim arow As Integer
Dim acol As Integer
Dim StartPoint As Integer
Dim EndPoint As Integer
Dim rStartPoint As String
Dim rEndPoint As String
StartPoint = 2
EndPoint = 4
For arow = 2 To 5
rStartPoint = "f" & StartPoint
rEndPoint = "t" & EndPoint
Charts.Add
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlLine 'Type of graph........................
I had created a base data with evaluator and performance appraisals templates which should be sent to each evaluator for filling up the forms based on templates
Next,
Macro that would i require will be
Where in my base data if i select filter of "Arun", i will performance appraisal templates in column I. Next, i have sheets individually created templates which refer column I
So, based on arun filter if i select, it should create a new workbook for arun and six individual sheets of employees reporting to him with a base data and appraisal templates similarly if i select anita in filter , it should create a new workbook for anita and six individual sheets of employees reporting to her with a base data and appraisal templates
I have data contained in matching cells from several sheets. I need a worksheet that reflect the summary of the data from the worksheets. No formula is required. I just want my summary worksheet to list the all the data from my other worksheets. I might end up having about a hundred worksheets that I need included in the summary. Attached is a sample. It would be better if the summary automaticaaly updates as new worksheets are added.
View 3 Replies View RelatedTrying to create new sheets with data being transfered over from a form. i.e. all the textbox's and checkbox's would appear in specific cells.
Textbox1
Textbox2
Checkbox1
Checkbox2
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
I have a workbook with a main worksheet "template", from which other sheets are created. Each worksheet has a specific value found in cell D8.
I want to collect the values found on each worksheet (in cell D8) and list them on the first sheet.
I wondering if it is possible for a macro to recognise whether or not there is text in an adjacent cell, and if there is, then to copy data from another adjacent cell.
For example, because there is data in C2, data from A2 has been inputted into B2. And any blank cells are left alone.
a
b
c
d
e
ref1
(cell A2 data here)
DATA
DATA
DATA
ref1