Create List From Data On Multiple Sheets
Aug 19, 2009
I have data contained in matching cells from several sheets. I need a worksheet that reflect the summary of the data from the worksheets. No formula is required. I just want my summary worksheet to list the all the data from my other worksheets. I might end up having about a hundred worksheets that I need included in the summary. Attached is a sample. It would be better if the summary automaticaaly updates as new worksheets are added.
View 3 Replies
ADVERTISEMENT
Mar 5, 2014
I got an employee list from couple of Site in different sheets it contains Employee name & Department but not a continued list, i.e.
on the attached file, i am looking to populate Summary Sheet, no of Sites, deparments & agents varies.
I want the Site, Department & Agent Name to Populate into one continues list without empty cells .
View 4 Replies
View Related
Oct 1, 2007
I have a worksheet with a list of project managers and a bounc of data on them.
How can i make a new file with sheets for every project manager in the list and copy the data for each one into his own sheet ?
Every project manager has many lines (there are about 200 managers and 30 000 lines and 30 columns )
I have managed to create a sheets for project managers from a list of unique entries but that's all.
View 9 Replies
View Related
Jul 28, 2014
I have three individual lists and I am using a formula like this for each of them =OFFSET(Table1,MATCH(F15,Table1,0)-1,1,COUNTIF(Table1,F15),1)
for my final cell I need to create another data validation list which is depenant on the values selected in the previous three lists.. how I would alter the formula to allow me to do that? I tried using and after the match to match all three tables but it never worked
View 12 Replies
View Related
May 22, 2013
So lets say I have 3 different sheets each with information on them like this:
Sheet 1 Sheet2 Sheet 3
item1|2 item2|7 item1|4
item3|5 item3|6 item6|2
item9|7 item8|4 item7|8
The first part (code#) is a code for an item. The second number is the quantity of that item. What I need to do, is to be able to populate a master list which will pull the quantity of each item and sum them up. In the above case, the master list would look like this:
item1|6
item2|7
item3|11
item4|0
item5|0
item6|2
item7|8
item8|4
item9|7
View 2 Replies
View Related
Jul 8, 2014
I have 6 worksheets in my file. In sheets 1-5, column A2:A26 list people's names. Some people's names appears on more than one sheet. Not all cells are populated with a value.
ex.
SHEET1
COLUMNA
Bill
[Code]....
My attempt was... =INDEX('Week1:Week5-!$A$2:$A$26,MATCH(0,COUNTIF($A$1:A1,"Week1:Week5"!$A$2:$A$26),0))
where the sheets were Week1-Week5 and the values on each sheet was A2:A26. But I think there's an issue with Excel being able to 3D reference for these types of functions.
View 3 Replies
View Related
Mar 1, 2012
I have a macro that creates sheets from a list of names. I have a template which is copied.
Sub CreateSheetsFromAList()
Dim MyCell As Range, MyRange As Range
Dim MySheetName As String
[Code]...
Sometimes I have to update that name list.
What I need is to have some addition that checks if the sheet does exist, if it does I want to skip and move on to the next name.
View 3 Replies
View Related
Nov 22, 2007
I have a workbook with a main worksheet "template", from which other sheets are created. Each worksheet has a specific value found in cell D8.
I want to collect the values found on each worksheet (in cell D8) and list them on the first sheet.
View 3 Replies
View Related
Oct 13, 2011
I am trying to create a macro that will create a unique list of the values in the same column across 5 worksheets, "Question1", "Question2", etc, and place the list in a new worksheet, "Summary".
The values are in column A in all of the worksheets, and the number of rows in each worksheet will change each day. I need the unique list to be added to the sixth worksheet, "Summary".
Also, after the list is created on the Summary worksheet, I need a count of each field by worksheet and a total. This is how I currently have the Summary set up:
Part Type|Total|Question1|Question2|Question3|Question4|Question5
Name|=SUM(C2:F2)|=COUNTIF(Question1!$A:$A,A2)|
=COUNTIF(Question2!$A:$A,A2)|=COUNTIF(Question3!$A:$A,A2)|
=COUNTIF(Question4!$A:$A,A2)|=COUNTIF(Question5!$A:$A,A2)
View 6 Replies
View Related
Jun 2, 2009
I need to be able to pull information from 5 columns on 5 different pages, and pull all of the unique names out of it. From there, I need to create a list of all of these names. More often than not, this could only be three names, but I still would like this to be automatic because eventually it could be 50 or 60, and manually editing this list would get tedious. Lastly, is it possible to have a list create cells? For example: I have information on row 4, this one will start on row 6. My next group of information starts on row 14. That leaves 7 rows for information. I don't want to leave a large gap at the top of the page, so I'd like to be able to create cells if the list I'm trying to create has more information on it. Seems plausible in my mind, but I'm still new to excel.
View 14 Replies
View Related
Jan 11, 2008
I'm trying to achieve is to write a macro that can search a column of dates then open new worksheets according to the months that are present in the column of dates. So, for example, if the column has dates ranging from January to June, I need the macro to open 6 new worksheets and label them January, February, March, April, May and June.
View 6 Replies
View Related
Apr 14, 2014
The macro creates multiple charts from data in one sheet, but now when I'm trying to scale it up to multiple sheets, the previous charts created disappear. E.g Creates 5 charts for sheet 1 (can see them being created, using debugger mode), looping to the next chart and they are created but the first ones has disappeared! What am I doing wrong? I'm creating my chart by the following code:
[Code] .....
The startpoint variable is changed for every new chart within the one sheet and the outputsheet is changed when you change the sheet.
View 4 Replies
View Related
Jul 16, 2009
i have a master Sheet which have 15000 Entries (A:A15000) many are Duplicate, Unique is 63 . Now i want to make the 63 Sheets in a Same Workbook as per these Entries.
I record the Macro for the first 7 Sheets. Now how can I Modifiy this Macro to 63, Instead of record again for another Entries.
Actually, I have recevied a File some time it has 15000 Company Names sometime 20000 and sometimes 2000, Now i want to Make the Sheets according to Company Name Wise.
Now , i know how to record the Macro, but i want to know how to Modifiy the Macro.
" How to Learn and Modifiy the Macros"
My code
Sub CreateSheets()
'
' Macro1 Macro
' Macro recorded 7/16/2009 by AAditya
'
' Keyboard Shortcut: Ctrl+w
'
View 9 Replies
View Related
Apr 5, 2013
how to create multiple sheets ? in a workbook if i want to create multiple copies of the same sheet, what is the shortcut method to do that?
View 5 Replies
View Related
Mar 13, 2014
I have CASHBOOK Worksheet and I want to create a LEDGER Account in Multiple sheet
View 2 Replies
View Related
Mar 4, 2014
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
View 3 Replies
View Related
Dec 16, 2009
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
View 6 Replies
View Related
Nov 10, 2011
I'm trying to create a workbook with multiple worksheets. My first sheet to be named "Main" and each additional sheet to be named in sequence after the values in the cells between B5:B98 on !Main.
Example:
B5 = "01"
B6 = "01.1"
B7 = "01.2"
B8 = "02"
B9 = "03"
etc...
I'd like to have a macro that would take a worksheet in this workbook named "Template" and make a copy for each cell between B5:B98 and name that new worksheet "c" and then the value in each of those (B5:B98) cells.
Example:
First worksheet named "Main"
Second worksheet named "c01"
Third worksheet named "c01.1"
and so on.....
View 1 Replies
View Related
Aug 6, 2007
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT()
Dim arow As Integer
Dim acol As Integer
Dim StartPoint As Integer
Dim EndPoint As Integer
Dim rStartPoint As String
Dim rEndPoint As String
StartPoint = 2
EndPoint = 4
For arow = 2 To 5
rStartPoint = "f" & StartPoint
rEndPoint = "t" & EndPoint
Charts.Add
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlLine 'Type of graph........................
View 2 Replies
View Related
Apr 27, 2014
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
View 4 Replies
View Related
May 5, 2014
New to using Excel formula's and am trying to create an IF/LOOKUP formula to look at multiple sheets within a workbook and display the information within the 'compare' sheet.The yellow cells are where data will be entered.
What I am trying to achieve:
Type the store numbers on the compare sheet (B2 and D2). For the sheet attached I have put 190 (in B2) and 2012 (in D2)
B2 store shows the predicted and actual values of 190 in columns B & C
D2 store shows the predicted and actual values of 2012 in columns E & F
(No need to worry about variance and difference columns)
So, if I change the store numbers in B2 and D2 to any of the sheet numbers, I want it to display the correct info for that particular store within the compare sheet.
I have attempted a formula, which you can see... I have basically looked at some previous sheets that had IF and LOOKUP on it and tried to replicate that for my sheet, but with no luck.
View 3 Replies
View Related
Mar 17, 2007
I Attached a sheet for what i'm asking about ,, i sent it before but the sheet showing it more clearly
View 10 Replies
View Related
Jan 4, 2013
I've attached a spreadsheet showing the effect I'm trying to achieve. A list (which changes weekly) contains employee details and length of service. Based on the length of service I need to build a new list grouping the employees based on the service length.
list-test.xlsx
View 6 Replies
View Related
Nov 7, 2008
Have a list of aprox 50,000 names. in that list names may repeat themselves multiple times. Is there a way in excel to extrapolate from that list of 50k to display only a single instance of each name in a separate Colum?
View 2 Replies
View Related
Dec 21, 2006
I'm trying to do. I have a sheet that gets popluated and once populate needs to create a one to many output sheet. See example. Sheet1 (gets populated from another process):
1
2
3
4
Sheet2 (is my output sheet, which I then save into a text file to be imported into a different application):
11111
12222
13333
14444
21111
22222
23333
24444
and so on...
Although there is other stuff that I'm doing, this is the jist of it.
View 4 Replies
View Related
Apr 13, 2014
I am trying to formulate a commission form which looks up the name of the sales person and then displays a list of the deal names withing Q1.
View 1 Replies
View Related
Feb 18, 2013
I have 6 macros recorded and I need to create a drop down list of macros so that I know what kind of Macro I am using.
View 9 Replies
View Related
Oct 11, 2007
I'm simply trying to take for example cell A1 from multiple sheets and list them vertically on a master sheet. When you drag it down it does not alter the sheet number, that just stays static.
View 3 Replies
View Related
Mar 6, 2008
I am trying to filter a range of text and copy only those entries from it that meet selected criteria into a new part of my page. The entries will all look like the following but will have varying numbers before the final Equity/Index part:
IBM US 3 C60 Equity
IBM US 3 P60 Equity
UKX 3 P5000 Index
UKX 3 C5000 Index
I have constructed something using a modification of the find nth word function from this site that allows me to filter based on whether the fourth part (or for the third and fourth choices, third part) shows C or P at the beginning and then based on the value that is written after the letter. However, I have to break down the code a bit further to firstly check whether the final word of the string is Index or Equity to decide which word to check for C/P. I was wondering if anyone knew whether there is possibly a more simple way of running a find within one cell than using the nth word function. Would it possibly be a case of making two subs within a different module and then calling them to look for the specific word number based on what I have in F6 (my original equity/index ticker symbol: for example IBM US Equity or UKX Index)? Attaching code below. I'm sure it doesn't make a lot of difference but in case it helps I am currently running Excel 2007 on a Vista machine but I also use it at work on a Win XP PC with 2003.
----CODE----........................
View 8 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
