I need a macro that will take each worksheet in my file & create a new workbook for each. The new workbook name will need to be the original worksheet name. The number of worksheets & the worksheet names will very each time I run this code.
I need to be able to copy a worksheet from my ActiveWorkbook into a new workbook and save that new workbook. No problem doing that, the following code does it:
Code:
Dim wb As Workbook
Worksheets("Alpha").Copy
Set wb = ActiveWorkbook
wb.SaveAs "Master.xls"
wb.Close
Where I am running into the problem is I am needing to copy the 2nd worksheet form about 10 different workbooks into this same workbook.
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I have a set of worksheets that need to be moved to their own individual master sheets. i.e. FW32Lightning.csv needs to be moved to Lightning.xls which has all of the fiscal weeks in it as seperate. I know the generic way of doing this, but I need to know how do I write the macro that when I run it every week I don't have to go in and change the fiscal week.
View 5 Replies View RelatedI want to copy old worksheet from old.xls (screen 1) to new book new.xls
(screen 2 ) on an extended desktop.
Screen 1 containing old.xls file in originally opened excel.
Screen 2 has new file new.xls in newly opened excel.
Dragging over is unsuccesful.
So is Edit-Move or Copy to new.xls.
1. I receive a weekly report 'Over Due Orders_1_14_08.xls' for example. This is sent every Monday and there is a Worksheet on this report called Raw Data.
2. I want to copy Raw Data from that Workbook but the name of the report changes w/ every Monday's date.
Any way of doing this - like just looking for "over due orders" in the Workbook name?
I have a workbook with two worksheets in it. The first "TO DO" and the second "Completed". In "TO DO", I have rows of tasks starting in row 4 (row 3 is my header), going to 200. What I'd like to have happen is when I put a "C" in column C, it moves the entire row to the "Completed" worksheet, greys it out and removes it from the "TO DO" worksheet. Then if I remove the "C" from the "Completed" worksheet, it moves it back to the bottom of the list. I already have a macro to resort it based on "priority" in column E.
View 9 Replies View RelatedI am using Excel 2007 on Windows 7 Home Premium 64bit.
My Workbook contains 2 Worksheets, both with the same headings in row 1. Sheet2 is initially empty, except for the headings in row 1.
The following is a sample of the data in Sheet1:
[Code] ......
I want to create a Macro to operate as follows:
In the above sample data, rows 2, 4, and 8 are identical, so I want to copy rows 4 and 8 to Sheet2, and delete them from Sheet1.
Similarly:
Rows 3 and 9 are identical, so row 9 should move to Sheet2;
Rows 5 and 11 are identical, so row 11 should move to Sheet2.
Rows 6, 7, 10, and 12 are all unique, so should be unaffected by the Macro.
New records will be added to Sheet1 periodically, so the Macro will be used each time to move any newly discovered duplicates to Sheet2.
The Macro should make no assumption about how the rows are ordered, and should not change their order.
I have uploaded two Workbooks, such that Workbook1 shows the original data, and Workbook2 shows the result I want to obtain.
Attached Files :
Workbook1.xlsm
Workbook2.xlsm
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
View 9 Replies View RelatedIs there anyway I can make it so that each individual sheet in my workbook has a different password?
View 9 Replies View RelatedI have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
View 9 Replies View RelatedI'm having trouble making a master worksheet that imports data from a set of worksheets that are in the same file directory.
Basically,
I have about 200 or so rate sheets and I need to get them all into one master worksheet so that way I can run different data and graphs without manually typing each one into the master worksheet.
I've not really new to excel; however I am new to VBA and I'm assuming that's what I need to use??
I've now uploaded all the correct files that I'm using.
Attached:
RC1272.xls
Master RCF Report.xls
I need to find a way to import the info RC1272 and others alike into the master file. In reality, I'll have about 150-200 "RC" to get moved over.
What stuff that I need to move from the individual RC files are highlighted in YELLOW in the RATESHEET tab
Here's a list of the items that I need moved over from RateSheet (from top to bottom and left to right) to the master file
Provider Name: Column B
Provider Number: Column D
OSS/IPC Resident days: Column F
Total Resident Days: Column G
Total Provider Beds: Column E
Total Allowance Days: Column H...........................
I was after a bit of code to delete the range names on a particular worksheet I thought it couldn't be that hard but have only been able to find this in the archives, unfortunately I get an error when trying to execute it:
Sub Delete_My_Named_Ranges()
Dim n As Name
Dim Sht As String
' Put in name of sheet where the range is located
Sht = "Org Lookups"
For Each n In ThisWorkbook.Names
If n.RefersToRange.Worksheet.Name = Sht Then
n.Delete
End If
Next n
The error I'm getting is Run-Time error 1004, Application defined or object defined error.
I'm trying to run a number of individual web queries and would like to paste them one under the other in worksheet2.
Sub ImportData()
Sheets("Sheet2").Select
With ActiveSheet.QueryTables.Add(Connection:="URL;" & Sheets("Sheet1").Range("D11"), Destination:=Sheets("Sheet2").Range("A1"))
.Name = "yahoo"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False.....................
The idea was to save the the selected files specified in the array as individual files. For example, In the Workbook "Main", there are worksheets "Susan", "Mary" and "John". If i specify "Susan" and "Mary" in the array, it should output only these 2 individual files. However, I am only getting the file which is actively selcted in the main. Is there anything wrong with the for loop?
Sub SaveShtsAsBook()
Dim Sheet As Worksheet, SheetName$, MyFilePath$, N&
Dim ws As Worksheet
MyFilePath$ = ActiveWorkbook.Path & "" & _
Left(ThisWorkbook. Name, Len(ThisWorkbook.Name) - 4)
With Application
. ScreenUpdating = False
.DisplayAlerts = False
' End With
On Error Resume Next '<< a folder exists
MkDir MyFilePath '<< create a folder
For Each ws In Worksheets(Array("Mary", "Susan"))
SheetName = ActiveSheet.Name
Cells.Copy..............................
How to Lock Individual Cells in a Worksheet excel 2007 .... i.e.
A2:A8
I want this selected area locked with password.
The other day, someone sent me a spreadsheet with multiple worksheets. I needed to be able to send each worksheet to an individual for review, and each recipient did not need to see everyone else's sheet. So I found a tip on-line that included the following VBA code to save the sheets to separate Excel files. Life was good until those who didn't have Office 2007 could not open their sheets, even though the original file had been saved with the Excel 97-2003 option. They had first received the message, "The file you are trying to open, "<filename>" is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?" When they said yes, all they saw was a scramble of machine code. I thought that maybe there was a special extension for Excel 97-2003 files, but when I looked it up in a book I have, it just said the extension was .xls, which is what the code used. Is there other formating that needed to be saved?
Sub Copy_Sheets_to_Separate_Workbooks()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
If ws.Visible = True Then
ws.Activate
ActiveSheet.Copy
With ActiveWorkbook
.SaveAs "C:Documents and Settingsruce.vanbibberMy DocumentsTITLE I - M A I NTitle I BudgetsAllocation Budgets - Schoolwide - FY 10" & _
InputBox("Please enter the Save As Name...", "Worksheet Save As") & ".xls"
.Close
End With
End If
Next ws
End Sub
This macro uses data validation and copies new entrys to my Company List sheet. In a different workbook (2.xls). Can this be changed so it copies the nesessery data to workbook 2.xls?
This works if i take the [2.xls] out but only on the same workbook. But i need 1 workbook with the list in and 1 workbook that grabs information from that list and adds to it.
My current project involves sorting a spreadsheet, selecting specific qualifying data from the sheet, storing it into a variable, the pasting the individual values from the list into individual cells on a different sheet within the same workbook. Here is the code I have so far...
Code:
Sub Test()
'' freeze screen updating to remain on main worksheet
Application.ScreenUpdating = False
'' move to Avaliable worksheet
[Code] ..
When this code runs the first item in the list pastes into Sheet10 A1, but no other values from the list are placed into Sheet10. Previous to this I had been using a variation of this code to push the list into a combobox list within a userform. In that case instead of
Code:
ThisWorkbook.Worksheets("Sheet10").Range("A1") = x
I had
Code:
Combobox1.list = x
And this worked perfectly; creating a list within the combobox (in fact I can use this modification to interrogate my code to determine if the list is being properly generated, and it is).
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3. worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3. workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
I have a worksheet (Morning Reports) that has a running macro on what I need is how do I get this same code to work on a different sheet titled (Afternoon Reports) This afternoon report will be a scaled down version with slightly different range:
How do I modify this code to do the same thing just on a different sheet
[Code] ....
Protection password is "Financial3" and sheet and VBA
Attached File : New Morning Report - Master_Copy-NO DELETE.xlsm
Im trying to create a document that creates a new workbook when certain functions are selected and have written a macro to assist with this. Basically im working on a comprehensive checklist with all possible scenarios that will need to be tailored for use, so you can create a document with just what is applicable to you and not the whole checklist. I have attached a sample of what i mean, along with clearer descriptors of what the document is designed to do.
View 5 Replies View RelatedThe last few days I have had great support in answering my questions. I would like to tweak the code one more step.. The RFQ LIST workbook grabs data from Inventory workbook after select the workbook.
This code in RFQ LIST allows to select the workbook, I would also like to select the workbook.sheet as found out they want to tab the data and keep long term history.
I have a Workbook that has a macro that, as of now, is referencing the Workbook's file name. I'd like it to just be referencing the worksheet itself (it is in the same workbook) so that when the file name is changed, the macro still works.
I know which part needs to be changed... just not what to!
Code:
Sub CopyData()
Dim Cell As Range
Dim DstWkb As Workbook
Dim DstWks As Worksheet
Dim R As Long
Dim Rng As Range
Dim RngEnd As Range
Dim SrcCols() As Variant
Dim SrcWks As Worksheet
[code]....
Is it possible to write a macro code, which will paste a predetermined value into a different workbook?
For example, I have 3 open workbooks, ie, 3 separate instances of Excel running.
When I run the macro in "Workbook 1", I want the value "1" to be pasted into cell A1 of workbook 3. (C:workbook1.xlsx)
When I run the macro in "Workbook 2", I want the value "2" to be pasted into cell A1 of workbook 3. (C:workbook2.xlsx)
Thus:
The value of Cell A1 in Workbook 3 changes as the macros specified above are run. (C:workbook3.xlsx).
if it is possible, and how to go about it.
Copy worksheets from many workbooks to one Master workbook, which will be used to aggregate the data. I need a macro to do this, which will automatically name the worksheet it creates (using information from one of the cells).
The second part of my problem is that it needs to be smart enough to recognise if the worksheet that is being copied, has previously been copied to the master. If it has, it should overwrite the original worksheet rather than create a new one.
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3.
worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3.
workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
Here is the code I have:
Windows("2.xlsm").Activate
Sheets("Report_P").Select
Sheets("Report_P").Copy After:=Workbooks("New_report.xlsx").Sheets(9)
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I need to apply the following code to all the sheets in my workbook (they are all identical format)
rivate Sub mymacro1()
Application .OnTime TimeValue("10:27:00"), "MyMacro1"
Dim objOL As Object
Dim objItem As Object
Dim lngRow As Long
Set objOL = CreateObject(" Outlook.Application")
lngRow = 6
Do While activehsheet. Cells(lngRow, 1) <> ""
If ActiveSheet.Cells(lngRow, 6).Value < Date Then
Set objItem = objOL.CreateItem(0) 'constant olMailItem = 0
With objItem
.Body = "The training review for employee: " & ActiveSheet.Cells(lngRow - 5, 2) & " is due today """.....................
I don't know what syntax to use to 'globalise' if you like the macro to perform the action in the code to all the sheets.
