say i have a worksheet named "sheet1" and a worksheet named "sheet2".
In sheet 1 i have a buch of data, e.g it looks something like this:
1 TRUE
2 FALSE
3 FALSE
4 TRUE
5 FALSE
6 FALSE
whats the macro code for it to only copy the "TRUE" number to "sheet2"? so it will only copy 1 & 4 to sheet2.
I have a workbook and I am looking to write a macro that will do the following in a sheet named Monthly Chart.
Could someone assist me (or let me know if this is possible) in writing a macro to do the following: First search in column C for the last row with a value, then select the range C(last row with value):P(last row with value), then copy that set range into a worksheet named Chart2.
I need a bit of assistance in identifying the dynamic range so that my macro below will work:
View 3 Replies View RelatedI have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.
This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.
Is there an easy way of doing it? Or will I have to write out a new Macro for every row?
I am using command buttons to perform various macros.
I have worksheetA with a defined range of cells of information that i sometimes want to copy to the index file. I click the command button to run the macro that copies the range to the next available row in #Index.xls
How can i change the following macro to only copy the values, and NOT the formatting?
Also, why does this particular macro cause the Command Button to remain stuck in the pressed position? It is the only command button triggering a macro that actually stays pressed, requiring my to click it again to depress it.
here is the macro i have so far:
-----------------------------------
Sub copy_to_index()
Dim bk As Workbook
Dim bSave As Boolean
Dim lRow As Long
' test to see if #Index.xls is already open
On Error Resume Next
Set bk = Workbooks("#index.xls")
On Error GoTo 0
If bk Is Nothing Then...........
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders()
Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1)
'Move new range down to start at the fisrt data row.
Set rTable = rTable.Offset(1)
rTable.Copy Destination:=Range("EndT2")
The following macro copies a range from "ThisWeek" worksheet to a selectable worksheet "Week1, Week2, Week3, etc. (determined by value in cell P13 (1,2,3,etc.)) The copy destination is currently cells F5:F36 but I want to make this range selectable also (ex. G5:G36, H5:H36, etc).
For example: If "ThisWeek" worksheet (fixed) cell $B$7 = "Adam", I want to match/lookup this name on row 4 (column F,G,H,etc) on the destination worksheet and copy the range of data to a column under the heading labeled "Adam". (No need to verify if heading exists)
Hope I have explained my problem clearly.
I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
View 2 Replies View RelatedI created a macro that copies a range from one worksheet to another as shown below, which correctly copies everything including formulas.
View 9 Replies View RelatedI wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
I have trying to develop the following macro (see below) which bases adds a column on another worksheet based on a cell value, this part works. I then want to copy the formulas from the column to the left of the inserted column, and this where I am struggling.
I found a question posed by 'TBW MK' and tried to adapt that. I can't work out how to express which needs to be copied - currently shown as Range(), given that it is a variable
Sub New_World5()
Sheets("Process").Activate
Dim ColNo As Integer
ColNo = Worksheets("Input").Range("H2").Value
With Sheets("Process")
[Code] .......
I want to be able to copy cell D4, I4, G10, G12 etc from one spreadsheet and paste into another spreadsheet in the same locations as the source.
Is there a macro that will do this?
Is it possible to write vba code to copy the range A1:A20 from my workbook to a new workbook?
View 4 Replies View RelatedI am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
I have a long header I am pasting to a column "A" on a new Sheet. When the header pastes it is repeating itself but with long blank spaces in between each repeat. The first time goes from A1 to A152, which is all I want. But it shows up again starting at A180225, and again at A212993, and again and again. I only want a single instance of the header in Column A. Here is the macro I am using:
Sub Sort_Cells()
Rows("1:1").Select
Selection.Copy
Sheets.Add after:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Columns("A:A").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
True, Transpose:=True
Selection.Columns.AutoFit
Range("B1").Select
End Sub
i need a macro that will copy pfolio and Totals 0 to sheet2 range A12, (i dont require the headers to be copied), the totals column is not always in Column B it varies, so the macro needs to factor this in. When copying the totals over i need the code to round the totals to 2dp, if there is a 0.00 in sheet 2 then clear cell and move one cell up.
Sheet1 AB9pfolioTotal10KFGEEE3411SDFSFF012ERWER1513REGERG0 Excel tables to the web >> Excel Jeanie HTML 4
Sheet2 AB11pfolioTotal12KFGEEE3413ERWER15 Excel tables to the web >> Excel Jeanie HTML 4
I cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:
Sub Test2()
ActiveSheet. Range("a1").Copy _
Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0)
End Sub
That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:
Dim userInputCell As Range
On Error Resume Next
Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8)
On Error Goto 0
If userInputCell Is Nothing Then
MsgBox "Cancel pressed"
Else
Msgbox "You selected " & userInputCell.Address(,,,True)
End If
The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB:
Sub Median_Database()
'This Macro takes the median from each station tab in the current Basin workbook
'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:Â
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
I need to create multiple copy of workbook from a named range called - CoCode - range is on sheet called - Data - cell range - L2:L37. Problem is that i want each workbook named as the name that is in cell range (CoCode). Also in same workbook in a sheet called - Company Summary , in cell J1 there is validation list that refers to range same (Codode) i want that to change in each workbook.
I.e 1st copy of workbook name is equal to 1st reference in range CoCode and same 1st reference in Validation list in - Company Summary - Sheet in cell J1. Also selecting Validation populates several sheets in workbook to information revelant to that company code selection in cell J1, - there are no external links to this document-
I use an excel workbook that contains around 20-30 output tables/ranges and i would to have a macro which will enable me to open a specific word document and paste these tables/ranges from excel into the word document. I am unsure as to how to get excel and word to "talk to each other"???
To make things more difficult i would like to be able to set the paste location in the word document, and ideally i would the copy and paste function to be a normal copy and paste and not a paste special as the tables/rnage in excel have already been formatted correctly and column widths adjusted to fit the margin of the word document.
Currently I select the range in excel, switch to word and paste then continue until all tables/ranges are pasted. Not difficult but as certain calculations change these tables/ranges need to be re-copied and pasted to word which gets frustrating.
first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
