Macro To Copy Range Of Cells To Next Column
Oct 16, 2011
I have trying to develop the following macro (see below) which bases adds a column on another worksheet based on a cell value, this part works. I then want to copy the formulas from the column to the left of the inserted column, and this where I am struggling.
I found a question posed by 'TBW MK' and tried to adapt that. I can't work out how to express which needs to be copied - currently shown as Range(), given that it is a variable
Sub New_World5()
Sheets("Process").Activate
Dim ColNo As Integer
ColNo = Worksheets("Input").Range("H2").Value
With Sheets("Process")
[Code] .......
View 6 Replies
ADVERTISEMENT
May 22, 2008
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies
View Related
Oct 24, 2013
I am trying to copy a range of data from one sheet to another. I can almost get it to work. Here are the values of the variables I use in the code below
Code:
cal_col_counter =5 col_counter=1 and no_of_rows=249
I can't understand why this code works
Code:
Sheets("data converted").Range("e1:e" & no_of_rows).Copy Destination:=Sheets("calculations").Range(Cells(1, cal_col_counter), Cells(no_of_rows, cal_col_counter))
But when I change it to this
Code:
Sheets("data converted").Range(Cells(1, col_counter), Cells(no_of_rows, col_counter)).Copy Destination:=Sheets("calculations").Range(Cells(1, cal_col_counter), Cells(no_of_rows, cal_col_counter))
it gives me an application-defined or object-defined error.
View 2 Replies
View Related
Oct 26, 2013
I am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.
Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.
View 2 Replies
View Related
Nov 30, 2007
The following macro copies a range from "ThisWeek" worksheet to a selectable worksheet "Week1, Week2, Week3, etc. (determined by value in cell P13 (1,2,3,etc.)) The copy destination is currently cells F5:F36 but I want to make this range selectable also (ex. G5:G36, H5:H36, etc).
For example: If "ThisWeek" worksheet (fixed) cell $B$7 = "Adam", I want to match/lookup this name on row 4 (column F,G,H,etc) on the destination worksheet and copy the range of data to a column under the heading labeled "Adam". (No need to verify if heading exists)
Hope I have explained my problem clearly.
View 9 Replies
View Related
Aug 24, 2008
I want to be able to copy cell D4, I4, G10, G12 etc from one spreadsheet and paste into another spreadsheet in the same locations as the source.
Is there a macro that will do this?
View 9 Replies
View Related
May 3, 2014
I have been struggling with a way to use an IF statement that determines if a cell in column B = 1 then copy that cell and the two cells next to it to a cell starting in range B50. Once the condition is true would want it to copy another below and so on.
B C D E D
1 E10 Rear door failed BL OK
2 B4 Clearance light inop. KL OK
2 C1 Fire extinguisher date expired KL Ok
1 E1 Bumper falling off BL NO
The first and fourth row have a "1" in column B. So as a result these two rows meet the condition and want to copy just the cell in B thru D. Results would look like below
First entry copied to cell B50
1 E10 Rear door failed
1 E1 Bumper falling off
View 3 Replies
View Related
Mar 20, 2007
first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
View 9 Replies
View Related
Mar 17, 2014
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx
View 3 Replies
View Related
Mar 26, 2008
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
Code: ....
View 9 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
May 1, 2014
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
View 11 Replies
View Related
Mar 7, 2008
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
View 8 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 8, 2008
I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
May 20, 2008
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
View 5 Replies
View Related
Aug 20, 2014
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
View 5 Replies
View Related
Apr 11, 2008
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
View 5 Replies
View Related
Aug 7, 2009
in column B of sheet1 i have every 3rd-4th row a name. i need to copy the name and the the data on the row below the name to sheet2,
the list of names can be min 2 max 30.
so sheet 1 has row 14- name in column B and C. in row 15 in columns d:z data for the name.
i need to copy this to one row in sheet 2 copied for each name up to 30.
View 9 Replies
View Related
Oct 4, 2013
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies
View Related
Aug 17, 2006
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
View 8 Replies
View Related
Jan 8, 2008
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies
View Related
Mar 19, 2008
1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
View 6 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Jan 22, 2014
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
View 4 Replies
View Related
Mar 29, 2014
am making Excel for private use, i need the following makro to be active, here is the idea because i didnt yet work with makros at all:
If A1 = False
then Range B1:D1 will be locked cells
If A1 = True
then Range B1:D1 will be unlocked cells
Those rules apply to 1 day in the year.
the range A1:D1 will be copied about 400 so the makro should be active to each day separatly.
Check the picture attached for example of one day
View 1 Replies
View Related
Aug 21, 2014
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
View 4 Replies
View Related
Apr 16, 2013
Code:
Range("a" & Cells.Rows.Count).End(xlUp).Select
Range(Selection, "a1").Select
For Each cell In Selection
If Not IsEmpty(cell.Value) Then
If cell.Value "2012*" Then
cell.Copy
cell.Offset(0, 5).PasteSpecial
End If
End If
Next cell
I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .
View 3 Replies
View Related
