Using Macro To Paste Same Info In Different Sheets
May 28, 2009
my macro is set up to do the following in my book once the user inputs a row of information. the user will go to the opproperate sheet based customer and input all info.
the macro is run (ctrl+z)
the macro takes the last row in the active sheet, and pastes it into the last row of the "ALL" sheet. then it goes and sorts the sheet in order.
i want to adjust it so that the user will input the row of information into the last row of in the "ALL" sheet. then based on the given informaiton, paste the same row in both the corresponding customer and location sheets.
im assuming im going to need to use some variables?
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows: *CUSTOMER *CONTACT *MACHINE TYPE *SERIAL NUMBER *QUOTE NUMBER *ORDER NUMBER
It takes an specific word from a certain number of files that you can choose from an add file window. Then when you choose those files the macro starts to run every file and look for an specific word, in this case is "ROFO March 2013".
When it finds it, The macro creates a new workbook( You create the name of that workbook y the first place of the macro, when you choose the files that you want to look for that word).
So, When the macro finds the word ROFO March 2013, it copys all the columns that has that name, and keeps looking until the file ends.
And paste all that info in the new file, A consolidate File.
I have change all the names of variables of the macro so you can understand it.
Code: Sub copy_data(ByVal Origin_File_route As String, ByVal destiny file As String) Dim Origin_File As String, RsBusq As Range, ROFO As String Dim Rango As Range, Fila As Long, lastrow as Long origin_file = Dir(origin_file_route)
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
I have 2 sheets of date. Sheet 1 contains a temple range A3:T162. This set of data is repeated x number of times. Sheet 2 contains a range of data A1:A3 repeated x number of rows. The data is different on each row. So if I have 10 rows of data in Sheet 2 , there will be ready in Sheet 1 10 sets of dats, as in range A3:T162.
I would like the following action: the contents of Sheet 2 Row 1 to be pasted into Sheet 1 cell A3,B3,C3 then contents of Sheet 2 Row 2 pasted into A163,B163,C163, then contents of Sheet 2 Row 3 pasted into A323,B323,C323,
So basically each consecutive row on Sheet of column A,B,C is pasted back onto Sheet 1, 160 rows below until all contents of Sheet 2 has been exhausted.
I have attached an excel sheet with the relevant data.
I am trying to have a macro that separates a list with unique values in column a, copy the results, open a file name in column AG, and then paste the copied stuff into the open workbook.
Currently, it runs, but when I copy to the new sheet, the thing I want goes where I want it to, but I also get an extra sheet1. how can i change this so the sheet1 doesn't get pasted in?
Sub MC() Dim r As Long, rng As Range, ws As Worksheet Application.DisplayAlerts = False Application.ScreenUpdating = False ActiveSheet.Name = "Sheet1" With Sheets("Sheet1") Sheets.Add().Name = "temp"
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB: Sub Median_Database() 'This Macro takes the median from each station tab in the current Basin workbook 'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I have a workbook with a number of worksheets. (say they are called A, B, C, D). Each sheet is exactly the same.
what i would like to do is look down column A in each sheet in turn and where there is a "y", it will copy the entire row of information (say A to J) to my "master" sheet. i want it only to copy (not delete) the information, but then enter a "y" in row A for all the columns it has copied.
(thereby meaning the next time i run it, it will not copy those rows again.)
I have information in range(p10:Q10) on sheet DEMO! that I want to paste the Values only into a Separate sheet "LIST!" in columns(W:X). The row will vary and will be based on the cell: "DEMO!A3" and will match a cell in column A of "List!"
I'll need to pick up the rates from sheets "SYD" & "BNE" by info from column A of "Summary", which means if the info in column A is "sydney", the formula should pick up the rates from sheet "SYD", if it's "brisbane", the formula should pick up the rates from sheet "BNE".Also, the rate should be matched by the column B,C & D from "summary" page.
I've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
I'm using excel 2003. I would like to select and copy rows of data within a worksheet of a workbook and then paste those rows into a newly created excel workbook. That is the easy part. The complication is that I would like the macro to select the rows based on a particular string value that will be impossible to specify in a fixed way (i.e., it will change from project to project). Let's say the variable that distinguishes the rows is location, so some are from Tokyo, some New York, and some from Paris. Using vba, how can one 'splice' the data into (in this case, three) seperate workbooks based on the string/values of another variable?
I am familiar with auto-filter, but in this case, I really do need to create seperate workbooks, rather than apply calculations to a selection of the data.
I have a "Generate Table of Contents" button that launches a macro. This macro builds the Table of Contents, creates (3) columns (Patient Name, Date of Pickup, and Frequency), finds all of the sheets in the work book (already renamed to a patient's name), sorts them alphabetically, and lists them under the Patient Name column.
This code works great - The next challenge:
On each sheet (which corresponds to a patient in the database), there is a cell that is filled in that states which day the patient picks up their medication. There is another cell that designates how often they come to pick it up.
I am at a loss as to how to direct the macro to: For each sheet, go to the specific cell, and then report it in the table of contents.
It somehow needs to bind the information together... meaning the patient name, date of pickup, and frequency must be displayed correctly each and every time on the same row.
I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.
I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").
I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.
Short Example of C1200* workbook in which data will be pulled from:
Job Number C12000 PM Abe Lincoln Foreman Thomas Edison Contract Date 1/1/10
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I have a workbook with a Cost Analysis sheet, a master menu sheet, and then all the sub sheets. I have coded command buttons on the master sheet, so once a category is selected, it goes to the appropriate sub sheet. On the subsheet is a list of items of varying sizes, and command buttons beside that which will allow the user to "Select" that particular size. Once the size is selected, the verbage in cell B5 plus the verbage (size) beside the selected amount, and the prices (labor and materials) in the next two columns, need to be transferred to the first available blank line, starting with line C5, to the Cost Analysis sheet. I have never done coding before for a Loop (i.e. For i = ???) and am not sure how to get it to do what I want. After they select that, they can pick a command button that takes them back to the master menu so they can continue picking various items until they are through. Then the Cost Analysis sheet will show all the items they picked, (name of item, material cost and labor cost: Columns B, C, & D). Not everything is coded yet (such as selecting a command button to go back to the main menu, because I wanted to make sure I could solve this problem before doing the easy stuff).
I read over quite a few of the previous threads and am not sure how to change them to suit my circumstance. I know some code (VB), but not much. I do not understand the concept of DIM, and how the loop works to make it happen myself, and all the websites I could find were not suited to my situation of copying three cells of data to the first blank cell on another sheet.
I need to make a macro to get sales information from sheet one to sheet 2 in a different order with a few other things that need to be added in everything I need is in sheet 2.
Sheet 1 is what I work with and I need it to look like sheet 2 using a macro I wrote what I need in sheet 2A13-...
I'd like to build two macros that are slightly different but are both along the same lines.. The first one will take only certain columns of information from the "Master" sheet and dump them into the "Public" sheet. (I want only certain information to be seen by others). I.E. say I only want columns A, H, K, L from the master sheet to go in A, B, C, D in the Public sheet. I hope thats enough detail. The other macro I want to build will take the A, B, C, D information from the Public worksheet and dump it all into another workbook called "Client Lists". The link to these two documents would be over a network so there shouldn't be any issue there... This way, all the people I work with can have this document and have up-to-date information on clients etc.ed...
There is a webcreated excel document that generates dates as the date of such as:
4/1/09 12:39:00 PM
I want to write a macro that will remove the date part and just leave the time. How would I write that? Times are in columns C and D and I want it to scan all the way down to row 600 and replace.
I have a template work book that has several worksheets with numerous formulas thorughout.
For example; =SUMPRODUCT(--ISNUMBER(SEARCH("MCSH",P9:P218)),--ISNUMBER(SEARCH("HWD",G9:G218))).
When I set up another template for a different crew I manually have to go through the entire work book and change the crew identifier (MCSH) in every formula.
I am looking for a formula or Macro if its the only way which does the following:
I have a set of locations in the below table which also has exactly the same name as a tab in the same workbook. So for example I have 1 tab called "summary" which contains the below table and than another tab called "London453" & another tab called "New York45" & another tab called "Paris3232" & last tab called "Vancouver43"
In the "Reconcilation needed" column I would like a forumula/macro to start in Cell B2 and look at the cell next to it in Location column [Cell A2] and then go to the corresponding tab in the workbook and if there is a value in cell G22 in that tab, than I would like the formula/macro to take the first 7 charactors of Location value otherwise put nothing.
Example :
in tab "London453" there was a value in cell G22 --> hence 7 charactors "London4" in below table No value in Cell G22 in the "New York45" tab --> hence nothing in below table Value in "Paris3232" tab in cell G22 -> hence "Paris32" No value in "Vancouver43" tab -> hence nothing
