Macro: Look At The Last Code In Col And Apply To Next Sequence
Dec 14, 2008
Step 1. In Col E a list of amounts will be pasted on a daily basis.
Step2. I need a macro that will look at the last code in Col F and apply the next sequence so $36,543.00 will have OPS003, since i might paste more than one amount in Col E i would like the macro to do the same thing also in Col F. I have a formula in G which will tell me what amounts are outstanding and which have cleared.
AmountCode 12,545.00 OPS001 1,236.00 OPS002 36,543.00
View 9 Replies
ADVERTISEMENT
Feb 26, 2008
I havae the following macro which i recorded in Excel. I want this Macro to run after another macro that groups data and creats tabs. The following macro will then add a column and run an array formula. I think this can be done in a loop but i'm not sure how to do it. This is working but takes a long time and times out by the time it reaches the last tab.
Application.Run "TotalHrs"
Columns("I:I").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("I4").Select
ActiveCell.FormulaR1C1 = "Invoiced Amount"
Range("I5").Select
Columns("I:I").EntireColumn.AutoFit
Selection.FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Selection.Copy
Range("I6:I1000").Select...................
View 5 Replies
View Related
Apr 30, 2008
I have to create autofilters dynamically on x columns based on the selection I make. I created this code but is not working.
LastColumn = Cells. Find(What:="*", After:=[A1], _
SearchOrder:=xlByColumns, _
SearchDirection:=xlPrevious).Column
Range(Cells(17, 1), Cells(17, LastColumn)).Select
With Selection
.AutoFilter = True
End With
View 2 Replies
View Related
Jul 16, 2014
Is there anyway in VBA to show the key sequence Alt+Shift+F10 then c?
Trying to find an easier way to convert text to number rather than having to use the Error Box method all the time as several large worksheets.
View 5 Replies
View Related
Mar 24, 2014
I'm looking to populate a series of sequential codes based on a code prefix.
Sheet 1: Master Code list
Column A = Lookup Value
Column B = Code Prefix
Sheet 2 - Results page
Column A - list of lookup values - sorted in value order - The number of occurances varies for each value
Column B - Results list
I want to populate Column B in the second sheet with a sequential code list for each different value in column A. So for the first value it would have the prefix then proceed numerically (Prefix0001, Prefix0002, Prefix0003...) then for the next value its prefix in sequence (2ndPrefix0001, 2ndPrefix0002, 2ndPrefix003...), etc
I'm wondering if there is a way to do this all in one step or else if there is a way way to number each occurance of the lookup value in the second page, in which case the code can be concatenated easily by a lookup of the code.
I suppose on the back of this there is another query - is there a way to concatenate a number where the format is 000# where the concatenated value will retain the leading zeros? I've been trying and it is stripping them out.
View 2 Replies
View Related
Aug 2, 2014
I have amended the code but it's for columns. I want this formatting for entire row 4 only and not for columns. Because it's disturbing my program if there is any data using ':' sign then the same formatting is applied which I don't want.
[Code] .....
The ':' sign is not changing to bold. I want to bold ':' sign too.
How to amend the code for entire row 4?
View 5 Replies
View Related
Jul 29, 2014
I'm using the following VBA code that highlights a selected cell or range of cells when selected (to more easily see what cells I've selected).
[Code] .......
I'd like to use this code on every worksheet within every workbook that I open. Right now I've only inserted the code in "This Worksheet" in a single workbook and that's the only place it works. I tried creating an Add In with the code so that it worked in all workbooks, but it doesn't work.
View 2 Replies
View Related
Nov 20, 2007
I recorded a macro in an Excel Workbook which contains 65 worksheets (--this is something received on a quarterly basis for which I have no control). The macro is successful within the workbook created however, a new quarter's data may or maynot have some of the referenced worksheets. 64.9 Waiv - 1 may exists and the others (2, 3, 4, etc) not. The macro fails and prompts for Debug if a worksheet does not exist.
Sheets("64.9 Waiv - 1").Select
Sheets("64.9 Waiv - 2").Select
Sheets("64.9 Waiv - 3").Select
Sheets("64.9 Waiv - 4").Select
Sheets("64.9 Waiv - 5").Select
Sheets("64.9 Waiv - 6").Select
Sheets("64.9 Waiv - 7").Select
Sheets("64.9 Waiv - 8").Select
Sheets("64.9 Waiv - 9").Select
Sheets("64.9 Waiv - 10").Select
Is it possible to alter the macro to look for and only invoke the code if a worksheet past 1 were to exist?
This is what I am requesting the macro do:
Sheets("64.9 Waiv - 1").Select
Range("B9").Select
ActiveWindow.FreezePanes = True
ActiveWindow.SmallScroll ToRight:=5
Range("J8").Select ...............
View 9 Replies
View Related
Mar 5, 2013
I have an excel spreadsheet that performs a particular calculations using a large set of data. However, I have over 1000 sets of data that need to be feed into this sheet and obtain the output calculation. Obviously I don't want to have to copy and paste in each new set of data to obtain my result as this would take a very long time. I am brand new to VBA, so was wondering if there is a way to write code in VBA that will automatically perform these calculations for one data set, save the output into a cell, and then move to the next data set and so on?
View 4 Replies
View Related
Feb 24, 2014
I would like to group some columns to all the sheets that I will have selected. Unfortunately the below code only apply the code to the sheet I am looking at.
Code:
Sub Group()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
With ws.Range("F:Q").Group
End With
Next ws
End Sub
View 3 Replies
View Related
Dec 7, 2009
The code below restricts users from inputting anything other than an uppercase "X" in a cell within column N. If the user types a lowercase "x", it would automatically convert it to uppercase. If any other value is entered other than "X", a message box will fire.
The code is specific to column N (column 13). However, I would like to apply this to multiple columns, such as columns 13,14,17,20 .....
View 9 Replies
View Related
Oct 7, 2009
The following code filters my sheet to show only values less than 0 in column T, (column 20).
View 5 Replies
View Related
Apr 14, 2006
I have been given a project to develop a spreadsheet using excel that will take data that is for a whole month, and evaluate by DAY to see if the same doctor was listed as attending two patients in surgery at the same time. If the Doctor's name is the same for two patients within the same timewindow for a certain day, a code is applied to EACH RECORD that the doctor was attending in the code field. If there was NO DUPLICATE patient, a different code is applied in the code field.
The tricky thing about this is:
1) Number of records will vary month-to-month
2) There could be 1-xx patient records where the same doctor is listed and there is overlapping time in the SAME DAY OF THE MONTH.
3) The code applied to multiple patients in the code field applies even if the minutes of overlap = 1 minute.
4) Start/End times and length of the patient visits will vary. (Example - Dr. Jones has two patients on the 15th of the month. The start time for patient 1 is 9:00am and ends at 10:15am. The second patient's start time is 9:30am and end time of 11:00am. Under this situation, the multiple patient code would apply)
Does anyone have any experience evaluating by date, then within a time-window to check for record overlap (doctor name in this case)? There could be 200-1500 records per month, and 100/day to evaluate for overlapping.
View 8 Replies
View Related
Aug 22, 2012
I am using this code and it works fine:
Dim MyData As Range
Dim MyResult As Range
Set MyData = Range("E1:E1000000")
Set MyData2 = Range("F1:F1000000")
Set MyResult = Range("J4")
MyResult.Select
Selection.Formula = "=COUNTIFS(" & MyData.Address & ",""=Kim""," & MyData2.Address & ",""=done"" )"
Is there any way I can change the code so that it automatically finds the last cell as Im using Range("E1:E1000000") and Range("F1:F1000000") because there will not be more than 1000000 entries.
View 2 Replies
View Related
Nov 28, 2012
I have 5 macros to be run in sequence. I have copied them into the file attached with ----- line as separator between them.
How can I possibly combine them all into ONE MACRO?
View 5 Replies
View Related
Dec 24, 2013
I'm use to highlighting two cells, find the plus, and copying a list of numbers down about 10 rows. Is there a macro instruction or VB instruction that will do the same?
Example,
Before:
G1010
G1011
After:
G1010
G1011
G1012
G1013
G1014
G1015
G1016
G1017
G1018
G1019
G1010
G1011
View 4 Replies
View Related
Feb 4, 2014
If I have a macro sequenced:
Code:
sub test_1(control as iribbon)
call macro1
call macro2
call macro3
call macro4
end sub
I adjust the CUI editor to
Code:
onAction="test_1"
I close everything down and save.
I open it up and click the button on the ribbon and it says it can not find the macro?
View 9 Replies
View Related
Aug 25, 2008
I have found a macro that should work with a change of a specific cell.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$7" Then
Call Button
End If
End Sub
However, the code doesn t work as with a change of A7 nothing happens.
A7 equals to result from a drop down list --> A7=A5(which is a drop down list value). The "Button" macro is a combination of 4 macros that get rid of zero values and names in pie charts (maybe this plays any role). The master macro is assigned to an object. The code is:
Sub Button1()
Sheets("report").Select
ActiveSheet.ChartObjects("Chart 140").Activate
ActiveChart.SeriesCollection(1).ApplyDataLabels AutoText:=True, LegendKey:= _
False, HasLeaderLines:=True, ShowSeriesName:=False, ShowCategoryName:= _
True, ShowValue:=True, ShowPercentage:=False, ShowBubbleSize:=False, _
Separator:=" "...................
View 8 Replies
View Related
Feb 21, 2014
I have a sheet with hundreds of rows of customer information; including a 7 digit customer number. I need a macro to delete all the rows where the customer number sequence start with 1 thru 8 (that would be the first digit of the customer numbers).
View 9 Replies
View Related
Dec 8, 2009
I am trying to set up a macro that hides certain columns of data in an automated spreadsheet that I don't need. How do I make the macro that hides the columns apply to all spreadsheets that are open except for the one I am in?
View 9 Replies
View Related
May 11, 2009
I am trying to record a macro that edits a rows data, and simply copies it to a new cell further along on the same row,. but i then want it to move to the next row down, and apply the same macro to that run, and continue until there is no data in the last row,. How do I get the macro to continue to the end of the data.
View 5 Replies
View Related
Nov 12, 2012
I have a document that is a subject index for book that has terms that reference page numbers. The structure is for example: Employment, 587, 592, 553, 605, 233 The term is always following by comma and then space and listing of page numbers that subject reference applies. In many cases the page number references are out of sequence and I need them to be in numerical sequence. i.e. Employment, 233, 553, 587, 592, 605 There are many subject terms in index and need to check and fix sequence of page references for each.
View 6 Replies
View Related
Jul 30, 2008
I've made a spreadsheet at home on Excel 2007 which has up to 5 Conditional Formatting rules per cell which works fine. The problem is when I save as 97-2003 version to send to work, the old version of Excel only supports 3 rules as you know, is there a way of applying 4 or 5 rules when specific text is populated in a cell on the old version of Excel?
View 14 Replies
View Related
Oct 3, 2009
I have a worksheet that I am always adding sheets to by duplicating an already existing tab. The tab ,"Current Invoice", is nested between sheets called "first" and "last". All duplicate sheets will also be nested between the "First" and "Last" tabs. What I would like to do is have a macro that affects all tabs between the "First" and "Last" only, even when the bookend tabs are hidden.
This is what I've started with.
HTML Sheets(Array("First", "Last")).Select
ActiveWindow.SmallScroll Down:=18
Range("U29:U190").Select
Selection.Copy
Range("AA29").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("W29:W190").Select
Application.CutCopyMode = False
Selection.Copy
Range("AB29").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
View 4 Replies
View Related
Dec 2, 2009
I need to run the below code on all work sheets:
Sub Remove_Duplicate()
On Error Resume Next
Columns("a").Insert
With Range("b1", Range("b" & Rows.Count).End(xlUp)).Offset(, -1)
.Formula = "=If(CountIf(B$1:B1,B1)=1,"""",False)"
.SpecialCells(-4123, 4).EntireRow.Delete
End With
Columns("a").Delete
End Sub
Basically I have lots of worksheets and I want to remove the duplicates in column B for each work sheet with a duplicate entry...
View 9 Replies
View Related
Jan 18, 2014
i want to apply a macro for all sheets that start with "MCC ENTRY" and "MCC EXIT"
i.e. MCC ENTRY 1, MCC ENTRY 2, MCC ENTRY 3, etc. & MCC EXIT 1, MCC EXIT 2, MCC EXIT 3, ETC.
View 1 Replies
View Related
May 14, 2007
I poked around and found a macro to highlight the active cell, but I want to limit it to be active only for range A1:A37. Any ideas? I put in the Set OldCell = Range("A1:A37"), but all it does is turn every cell you pick blue and it stays that way, so I'm not sure how to limit it.
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Excel.Range)
Static OldCell As Range
Set OldCell = Range("a1:a37")
If Not OldCell Is Nothing Then
OldCell.Interior.ColorIndex = xlColorIndexNone
End If
Target.Interior.ColorIndex = 8
Set OldCell = Target
End Sub
View 9 Replies
View Related
Aug 10, 2008
Could somebody update the below code so that it actions all open workbooks except the master (Book2). Also, so that it appends the data (which is basically 2 neighbouring colums of data) to the Master starting in column A
Sub Format_RAW()
'
' Format_RAW Macro
'
' Keyboard Shortcut: Ctrl+s
'
Selection.AutoFilter
ActiveSheet.Range("$A$1:$P$5105").AutoFilter Field:=7, Criteria1:=Array( _
"H1", "H2", "H3", "H4"), Operator:=xlFilterValues
ActiveSheet.Range("$A$1:$P$5105").AutoFilter Field:=1, Criteria1:= _
"Tu"
Range("G7:H7").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Windows("Book2").Activate
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Jan 31, 2009
Sub elaseval()
For each cell in Range(“B7:B50”)
Range("cell.Value").Select
Selection.Copy
Sheets("Input").Select
Range("$E$7").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Sheets("Sensitivity").Select
Range("C” & cell.Row : ”T” & cell.Row").Select
Selection.Copy
Range("C" & Cell.Row).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Next Cell
End Sub
I am trying to apply this set of commands to each cell in the range B7:B50. For each of these cells, I need "cell.Value" to refer to the value in the respective cell and "cell.Row" to represent the row of the cell that is currently being used.
View 9 Replies
View Related
Dec 19, 2009
I'm Working on the next part of my long term project.
I need to count the number of Cells Selected in MacroTest2.xls column BG.
( Selection.count) ?
I need to Open Workbook MacroTest3.csv. It has a Header and only Row 2 filled with data.
(Windows("MacroTest3.csv").Activate)
I need to Pulldown/Copy row 2 a number of times so that the Number of Duplicate Rows Created is Equal to the number of Selected Cells in the Count in MacroTest2.xls.
I have been able to do it based on a Static Number of Selected Cells (3) ( the existing Row + 2 ) by recording the manual event with this code.
Rows("2:2").Select
Selection.AutoFill Destination:=Rows("2:4"), Type:=xlFillCopy
Rows("2:4").Select
I'm trying to understand how to declare the variable and apply it, so that the Number of Rows of Template Data in MacroTest3.csv is Equal to the Number of Selected Cells in MacroTest2.xls column BG.
This is part of a Macro that will then transfer some same selected Range of Cell Data as well. It is Currently working but not with a variable number of selected cells. I can post the whole code if it would help you to see the whole picture.
View 9 Replies
View Related
