I have a work book with 97 sheets, all of the sheets are identical in format but contain different data. I need to multiple column F (which is a price) by column G (which is a quantity). I then need to sum the results and spit this number out on a new sheet. So in then end I would have 97 entries on the new sheet with this new sum which would give me are total stock value on hand.
View 4 Replies
I have data spread over several columns and this data is added from different files which has a different format than the one required to be in the Consolidated File.
I get results from a portal for Insurance certification, which has Exam Date, Issue Date and Validity Date which is copied manually and pasted from this file and to my master consolidated sheet...then I have to fetch other details for these certified employees from the HR Database which has the data in different formats...
So have to manually copy the format from the previous rows and then copy to the copied data, since this is done more than once in a day its tedious and time consuming so can this be done with a Macro..
I made my own small code but dont know how to make it act differently on selected columns....
I would select the entire matrix and then want the macro to run differently, taking into consideration the column names
[Code].....
I also need to add a vlookup formula for some column based on the column B's value...
Ex: This is for Col C
[Code] .....
So how do I write the code in such a way that the code acts on its own differently.
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies View RelatedCode:
Range("A1,A:A,C:C,E:E,D:D,G:G,H:H,I:I,J:J").Select
Selection.Delete Shift:=xlToLeft
When I wrte a macro as above, i get error "the command cannot be used with selections that contain rows or columns and also other cells. Try selecting only entire rows, columns or just group of cells".
Actually i want delete all columns except B:B and F:F
What I need to do is group and collapse certain columns when Cell D4 in my Date tab reads Bud. If it doesn't read Bud, I need it to ungroup those columns and group and collapse other columns.
So for example: If I have 6 columns (A - F), when Date tab cell D4 reads 'Bud'. I want to group columns A and B, and only show C-F. If the cell doesn't read Bud, I want columns A and B to be ungrouped, and Columns E and F to be grouped and collapsed.
I've been racking my brain, using the Record Macro and just cannot get it correct. Granted I have created something similar to HIDE my columns, however I need it to be grouped so that higher management can ungroup to see some details if need be.
Code:
Sub GroupColumn()
Dim s As Worksheet
For Each s In ActiveWorkbook.Sheets(Array("Name1", "Name2, "Name3", "Name4"))
If Worksheets("Date").Cells(1, 4).Value = "Bud" Then
[Code].....
I have two columns of data as follows:
10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......
I have on sheet1 a number (72 at the moment) of Form CheckBoxes.
In simple terms: I would like a macro to look at each CheckBox and remember its state (Checked or Unchecked)
Then, go through and Check All checkboxes
Call MyMacro
Once MyMacro is complete (Filtering & Printing)
Revert the checkboxes to their original state.
The purpose of the checkboxes:
When Checked column on sheet2 is UnHidden
When UnChecked column on sheet2 is Hidden
Or, UnHide All columns on sheet2, run MyMacro, then "re-hide" the columns that were previously hidden.
I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
I have a spreadsheet with 10 columns which are for tags for products. Some columns are filled in for 10 products and some are not. For instance, product 1 has 7 tags while product 2 has only 2 tags and so on. Now what I am looking to do is combine all the tags for each product with a "," inbetween each one. The problem is if I just use a simple =A2&","&B2&","&C2 etc formula is that if there are only 2 tags then I get 8 ","s. I also tried it with an IF statement but by the time I was done nesting items I became cross eyed and said there has to be an easier way to do this.
I have create a spreadsheet with the data and the result that I typed into the "result" column.
Example:................
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedI have a large database of research data where the first column contains different categories (labelled as I, II, III, IV, V, and VI). For each row there is a data value in the second column that is numeric. What I need to do is move the data so that the data are displayed in 6 columns with the data values listed each column heading according to the category label. In the example I've shown there are 6 different categories, but the number of categories (and hence the number of columns in the final resulting sheet) will change for different data sets that I'm using. Also note the the number of cases for each different category is different (so that each column will not be even in terms of the number of rows of data under each column heading). I hope I've been able to explain what I'm looking for clearly.
I've attached a sample file showing the sample data input that I have on one sheet, and then the desired re-tablulated outcome on the second. I have done this using the auto-filter function and copy/paste, but this will take far too long for the larger datasets I'm working with.
I have a spreadsheet with thousands of columns. Due to poor planning on my part I need to insert a column between each existing column (e.g. I need to insert a column between the existing columns A and B, B and C, etc...). I would rather not have to do this manually thousands of times.
View 3 Replies View RelatedI have columns A through AKP (A:AKP) with data, and there is a varied number of rows for each column. If possible, I need a macro that will "stack" columns in pairs of two. For example, column "C" directly under column "A" and column "D" directly under column "B" and so on for all columns A:AKP.
This is an example of what my data looks like:
COLUMN A COLUMN B COLUMN C COLUMN D
ROW 1 2598 F800 2599 F800
ROW 2 2598 K1300 2599 K1300
[Code].....
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
I want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
I have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
Want a single count of multiple columns based on the columns selected value. Data is in text format.
Have tried multiple COUNTIF statements and have tried using pivot table (Excel 2010) both only give me total counts for all. I think I need an OR statement somewhere, but not sure where?
In other words, if a single record has an "any" in the any fields or a "yes" in the yes fields, I want to to count that as one record.
Sample data:
Pegnancy Smoke
Pregnancy Alcohol
Pregnancy Marijuana
Pregnancy Powder
Stress Cigarettes
Stress Marijuana
Stress Alcohol
Stress Medication
[Code] .....
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I have column A and it has 1000 rows, every row has a number in it, from 5000 to 5200, meaning that some numbers are presented multiple times in column A.
I need to lose repetitions, so every number is in the the table only one time and then I need to convert this one long column into, for example, 9 columns, so there's no wasting of space and have only one column in every page, if printed out.
So, another question with regards to this sales sheet that i am setting up. I want to be able to take the information below and for each of the people listed (i.e. by their initials) i would like to...
1.) Take their associated % (Columns C, E, G)
2.) Multiply the % by the Revenue (Column H)
3.) Sum up the total for each of the names (Locatedin Columns B, D, F)
4.) Only sum up the ones that occur in Month 1 of the Year 2012
I have tried multiple ways with a Sumproduct but none of them have worked. I would love to be able to do this with a single formula without having to add another column, for instance, to track what MonthNum it is. I tried using some kind of offset, but i could never get it to work.. For instance to look through the range, find the initial go over 1 column to the right and multiply that % by the revenue if the Month is 1..
Date (A)Rec1Name (B)Rec1Pct (C)Rec2Name (D)Rec2Pct (E)Rec3Name (F)Rec3Pct (G)Revenue (H)1/1/12AD25.00%RU25.00%BF25.00%1000.001/1/12AD25.00%RU25.00%PNF25.00%2000.001/1/12BF50.00%00.00%00.00%1200.002/1/12BF50.00%00.00%00.00%1000.002/1/12BF50.00%00.00%00.00%1000.003/1/12AD25.00%RU25.00%00.00%1000.003/1/12AD25.00%RU25.00%00.00%1500.004/1/12AD16.67%RU16.67%BF16.67%1500.004/1/12BF50.00%00.00%00.00%1500.00
I need to find all rows that have columns that match in all 3 of the columns.
I then need to delete all but the last row in each "group" of rows.
like:
1 q w e
2 q w r
3 q w r
4 q w r
Delete rows 2+3
I have an excel workbook with 8 worksheets. Each worksheet has vertical columns (approx 250 columns per sheet) of numeric data. Is there a function or macro that will combine all of this data into one vertical column without having to individually cut and paste each one into the new column?
View 3 Replies View Relatedwhat I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
