Macro To Select All Rows Above Cell That Satisfies Condition?

Mar 26, 2013

In a particular sheet the data (with formulae) are present from rows E5:Q5000. I require a macro which automatically does the following:

- When user enters “submitted” in the row Column N, entire rows above that cell should be selected, and copy-pasted as values to remove all formulas. So if user enters “submitted”, at N31, then data set E5:Q31 should be selected and copy pasted special so as to retain only values.

-Finally the copy pasted data should be sorted as per the status of Column N.

View 4 Replies


ADVERTISEMENT

How To Use VLookup Return Only Some Condition Satisfies

Apr 26, 2014

I have an excel sheet with lot of data.i want to use vlookup function for getting what cell i want. the same time it will also check if and only if two cells are matching then return the result.is it possible. for example:

101 3.2 7.3 200 500
102 5.2 8.3 200 450
103 3.2 7.3 200 750
101 7.3 7.3 200 450
102 7.3 7.3 200 500

103 7.3 7.3 200 600

if my lookup_value is 103(ie A3 ) in this table array and required column is 6th column(ie E6).

return the value if and only if B & C cells of the corresponding row matches. In the example B6=C6 then return the E6=600.

if i am using without this condition it returns the same row values ie E3=750 required is E6=600

View 12 Replies View Related

Formula To Select Value That Satisfies Conditions

Apr 3, 2009

Need a formula that will use column F as a reference to find out if there are 3 previous wins and show the value of FG (H column) and if not it should return just a character ("-" eg). For example in our case the end result should be what is shown in column J. The problem I have is that the sheet contains a break in stats after every 20 games and more conditions have to be added to accomodate this and have not been able to succesfully do it. You can use other columns (as shown) for references if it is easier. See column L for what I have come up with but it does not quite work as I wanted it - as it shows a false where it should return just "-" and also in the row after the last data entry it shows a 0 instead of "-". Table gets updated.

Any other solution (not using IF function) would be fine as long as I get the end result in column J (as shown).

View 10 Replies View Related

Macro To Select Rows Based On Value In Cell A Of Last Row

Nov 17, 2007

What would a macro look like that would find the value in the cell of the last row in the A column, then set that as the selection criteria so macro could copy all rows that match that to another workbook?

View 9 Replies View Related

Macro To Find A Cell Containing Text /select Range Offset / Cut And Paste To Lower Rows?

Feb 4, 2014

I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.

I'm very new to excel macros and the parts I think I've put together are:

Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate

[Code].....

View 1 Replies View Related

Macro To Delete Rows With A Condition

May 28, 2009

What I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.

View 9 Replies View Related

Macro To Highlight Rows With Certain Condition

Nov 5, 2012

How to create a macro that would highlight a row that has the following condition :

name

ref num

sam

123456

sam

123456

alice

342333

In this table, i need a macro that would highlight the row that has alice data due to it been having 1 ref number count under the ref num column. The macro should loop and end with msg " there are 'x' records having 1 ref number count"

View 1 Replies View Related

Macro To Delete Rows If A Certain Condition Is Met

Jan 6, 2009

I want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"

View 9 Replies View Related

Macro To Delete Rows That Fill Certain A Certain Condition

Jun 25, 2007

How do I have the marco delete rows if the O column = a certain cell.

For instance my O column has a bunch of colors

Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".

View 9 Replies View Related

Macro To Copy Rows From One Worksheet To Another If Condition Is True

Oct 14, 2006

if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.

There can be multiple rows of data where this condition is met.

View 3 Replies View Related

Macro Code Automatically To Hide Rows Based Condition

Apr 26, 2008

I have a spreadsheet that calculates percentages and then outputs the results to a pie chart. There are 9 different percentages being graphed in cells A41 to A49. The chart looks weird if any of the percentages end up being 0, so I have the formula set to add 0.00001 to each calculation (so they show up as 0% and display on the chart as 0%, but truly are 0.00001). I would like it so that if any of these 9 percentages ends up being 0 (or really 0.00001) that the row automatically hides and thus won't display on the pie chart. How can I create a macro that automatically runs to accomplish this, and automatically updates as percentages are recalculated.

View 3 Replies View Related

Select All Rows In A Macro

Nov 11, 2008

I need to create a new macro that will select all rows that have data and create a (3) pivot tables.

I have tried to create macros that will create a new tab and populate the pivot table. I keep getting an error that says "subscript out of range", so instead of creating the tab during the macro I have created the tabs as part of the template.

Again the problem is when running the macro with more rows, the macro doesn't recognize the additional rows. Ctrl + A is used during the macro but is hard coated for only the number of rows it selects, Ctrl + A twice is giving me "blank" data in the pivot tables. I have attached a sample sheet with 14 rows. Next month there may be only 10 rows or 50 rows. I have macros created for the pivot tables to view.

1: How can I create a macro to select all rows with data?
2: Can I create 1 Macro to create all 3 of the pivot tables needed?
3: Can the macro also create the tabs during the execution of the macro?

View 7 Replies View Related

Macro To Select Certain Rows?

Jul 3, 2012

macro to select the header and rows below till the next header is reached if column L is less than column J for the whole sheet which can be up to 5000 lines or more. Then copy all of those to a new sheet. Here is part of the spreadsheet for a visual:

Product number
Name
Name
Finish date
Planned Qty
Mfg U/M
Lvl
Component
Name

[code].....

View 9 Replies View Related

Macro To Select Only Rows With A Value In A Range

Feb 9, 2007

I'm in charge of taking a report; streamlining its functions; and automating future reporting.

I'm using a database and some of the reporting function Access has. For another variation I'm forced to export the query to excel and transpose the vertical layout horizontally.

I'm making the entire process automated via a macro. The code is too long to post in its entirety but here is an example of what I'm trying to accomplish:

View 14 Replies View Related

Macro To Select 2 Rows From One Workbook To Another With Multiple Tabs On Each

Feb 21, 2014

I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.

View 3 Replies View Related

Excel 2010 :: Condition To Create New Cell Value On Several Rows

Apr 5, 2014

I am working on a schedule worksheet, the days are the columns and the staff member names go down the rows. I want to create a new cell value based on a condition on each row. I have been successful working with one row but how to efficiently do the same for each row.? I'm working with Excel 2010.

View 9 Replies View Related

Count Simultaneous Rows With Same Cell Value And With Time / Date Condition

May 9, 2014

I have rows of data in excel that update automatically and i want to check in column B how many times there are simultaneous occurrences of a cell value and then if those occurences have been there for a time specified time duration using column C which has a time and date stamp. The time and date stamp is when the price is saved down.

A Simplified Example:
Item
Action
Date & Time

Red
Buy
09/05/2014 09:00

[Code] .....

What I would like the formula to is to count the occurrences of cell B that have been avilable for longer than say 30 minutes.

Formula that worked out the occurrences of cell B with this formula

=SUM(IF(FREQUENCY(IF($B$2:$B$7="Buy",ROW(B2:B7)-ROW(B2)+1),IF($B$2:$B$7<>"Buy",ROW(B2:B7)-ROW(B2)+1)),1))

So if i wanted to count the simultaneous occurrences of "Buy" then the formula would result 1 and the same for sell if i changed the formula would be 2.

Now i want to try and get a way of using the time those occurrences were available for by using Column C

The simultaneous "Buy" was available from 09/05/2014 09:00 to 09/05/2014 11:01 which is longer than 30 minutes so i want to count that as a occurrence.

Then both the "Sell" were only available for 14 minutes the first time and then only for 20 minutes the second time so none of those would count.

View 1 Replies View Related

Color Table Rows Where Specific Cell In Row Matches Condition

Jul 2, 2008

I have a selection on a worksheet that has 4 consistent columns (A, B, C, and D) each with a variable number of rows all containing string type data. With this data I want to use Conditional Formatting so that when I have a string value of X in column D for any row, that whole row with the X in column D has it's color change to say grey, this should happen regardless of what strings are in Columns A, B, or C.

Below is the way I've been trying to do this thus far and failing, when I run this code below I can only get it to grey out the cell with the X not the whole row.

Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlCellValue, Operator:=xlEqual, _
Formula1:="=""x"""
Selection.FormatConditions(1) . Interior.ColorIndex = 16

View 4 Replies View Related

Highlights Multiple Rows If Select Cell (formula Cell)

Oct 3, 2013

I have a matrix with numbers that each cell is composed by a function of two parameters (two columns). The formula is

"=COUNTIFS(T2:T99,"15",V2:V99,"14")",

So it's counts when in one cell column I receive 15 and in the other 14. For instance, I receive the number 3 - so I have three rows that match (the first column with 15 and the second with 14).

I want, when I select the cell from the matrix (table) with the number 3 (that I receive from the formula) it will highlight the relevant rows..

View 3 Replies View Related

Select Rows When A Cell Is Not Empty

Oct 30, 2009

I would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty

View 5 Replies View Related

Run Macro When Cell Condition/Criteria Met

Oct 6, 2006

Two ranges A1:A20 (input values) and B1:B20 (results).

Input values are always the digit 1 which starts the calculation and the result comes up in the cell to the right.

Example:
Input (1) in cell A1 gives a result value in cell B1.
Input (1) in cell A12 gives a result value in cell B12.
I need a macro StartCalc to do the following thing:
Go to cell A1.
Put in the value 1
Check the result cell B1.
If result value > 20, then run macro Test (this macro is working)
Go to cell A2.
Put in the value 1
Check the result cell B2.
If result value > 20, then run macro Test (this macro is working)
.
Go to cell A20.
Put in the value 1
Check the result cell B20.
If result value > 20, then run macro Test (this macro is working)
End of macro.

View 4 Replies View Related

SELECT Range With Condition

Jul 28, 2014

Set Rng = WS1.Range("C10:C8000")

i need to set the Rng where column AM, from cell 10 to the and of list, contain the string "85", is possible without to loop all value in sheets column AM?

View 1 Replies View Related

Select Case Condition Not Being Met

Oct 15, 2008

Select Case Condition Not Being Met

View 4 Replies View Related

Select Cell Content From Visible Rows.

Mar 15, 2009

I have a worksheet whereby many of the rows are hidden. These rows were initialy hidden by means of scipts ( I have numerous scripts to hide data under various criteria) eg: Scripts which hide rows based on cell count, cell color, cell data information etc...

Now that I am able to veiw only the information that i want to see.. is it possible to create a script which selects cells only from rows which are visible? I have created a Named range begining from E:12 to G:500 called "Select_EFG"

Uing the example below, how could I select the cell data from the visible rows (12, 30, 34, 35, 50 etc... up to row 500.) from this Named Range (columns E:12, G:500) .... and paste this information in Sheet 2 Row5 columnC

........A,B,C,D,E,F,G,
Row
12
30
34
35
50
57
59
100
140
400
490
500

View 2 Replies View Related

Macro Needed To Fill Down Other Cell Base On Condition

Apr 8, 2009

I have accounts that I need to compare to see if they exist on my system the account that has a listed date, exist on my system then if I can fill the dates in the accounts the match then I will be able to delete the other accounts that dont have a date see attach file for more understanding.

View 2 Replies View Related

Macro To Move A Range Of Data Over 1 Cell, If A Certain Condition Exists

Mar 4, 2008

I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.

14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178

View 9 Replies View Related

Select Certain Cells Based Upon Condition And Putting In Sheet 2

Mar 25, 2009

I have attached the file with this post.

What I like a macro to do is:

Whenever a 'D' ends in column "Step 5" the last value of 4 cells to the left to be put in sheet 2 in reverse order.

View 5 Replies View Related

Cell Equals 0 Changes When Condition Met - Leave Unchanged When Condition False

Mar 24, 2014

I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.

The Cell formula that I am trying to use is as follows:

=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))

A3 contains TODAY()

H114 is the cell being calculated

AA118 is the cell containing the calculated value for the current month.

View 2 Replies View Related

Select To Last Cell Macro

Dec 19, 2006

I used to do some VB stuff several years ago, but it's unfortunately not exactly like a bicycle and I'm having a hard time remembering what I'm needing to do.

I have several functions in my macro which are supposed to select an entire column of data and do various things with it, from cutting & pasting to combining data from multiple text cells. Also it's got to input in one column, a text string "CIS". Anyway, if I tell it the whole column, then it winds up overflowing beyond what I need, and I really only want it to affect as many rows as have data in the spreadsheet.

Here's the data:
'Unlimited Range K here', that's where I want it to select to the last row of data for the range.


Sub ComputeCSV()
'
' ComputeCSV Macro
' Macro recorded 12/18/2006 by Matthew Roberts
'
' Keyboard Shortcut: Ctrl+l
'
Columns("G:G").Select
Selection.Cut
Columns("B:B").Select
Selection.Insert Shift:=xlToRight
Columns("G:G").Select
Selection.Cut

View 12 Replies View Related

Using Macro To Select Cell

Feb 25, 2009

Can anyone help me to write a macro to select certain cell depending on a value in other cell.
I.e: If cell A100=1, then select cell B1, but if cell A100=2, then select B2, and so on.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved