if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies View Related1. I need a script to retrieve data (member number) from "Search List" worksheet and then to search it in "Members List" worksheet.
2. Once the search result (member number) found, e.g. 00311, it will copy the entire row to the "Only Selected" worksheet.
I have also attached a sample excel for better understanding.
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
I need to copy the data form Cell "C" to Cell "D" only if Cell "D" is empty
i have been using the following code but it will overwrite cell "D" regardless if data is present or not.
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
I have two worksheets.
Worksheet 1 is a large data sheet containing columns of data (Date, State, Payment Method, etc, etc)
Worksheet 2 is the 'Report' worksheet with 2 blank cells (A1 and A2) for users to manually enter the Start and End dates, a drop-list for State names (B1) and a drop-list for Payment Method (C1) - Cash or Credit Card.
How can I write a macro to:
1) Filter by Start and End Dates then,
2) Filter by State name then,
3) Filter by Cash or Credit Card then,
4) Copy these filtered records (i.e. whole row/s) onto the 'Report' worksheet starting at Column A, Row 5.
5) Macro to end with a 'Successful' message.
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
View 5 Replies View RelatedI worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I would like an easy/fast way cut an entire row of data from one worksheet ("Open Work") to another ("Closed Work"). Each worksheet has a matching Header Row from column A - N. In "Open Work" I have column "K" with various values, but I'm looking specifically for the "CLOSED" value. If a cell in column "K" = CLOSED, I want to cut the entire row and paste it into the other worksheet "Closed Work".
That was a no-go! It copied limited rows AND duplicated them.
VB:
Sub copyrows()
Dim tfCol As Range, Cell As Object
Set tfCol = Range("A2:A9") 'Substitute with the range which includes your True/False values
For Each Cell In tfCol
[Code] ......
I need a macro that would sort out the true value in column A, and paste it to another sheet (range A77)
View 10 Replies View RelatedI need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies View RelatedI need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
I have a bunch of data (by date) on one worksheet and I want to output results to another worksheet (in the same workbook). I want to be able to alter the rolling period for some financial calculations (thus the rolling period countdown). The code I've written doesn't suck the data from the second worksheet. The first worksheet is where vba is launched from. I've attached all the code.
Private Sub CommandButton1_Click()
Dim rowworking As Integer
Dim rowoutput As Integer
Dim rollingperiodcountdown As Integer
Dim Date1 As Date
Dim expectedreturn As Single
Dim returnwithedc As Single
Dim trackingdifference As Single
Dim returnwithbetamodulation As Single
Dim betamodulationtrackingdifference As Single
Dim improvement As Single
Dim x As Integer
Range("a5:g15000").Select
Selection.ClearContents
Range("a5").Select
For rowoutput = 5 To 500
Worksheets("Rolling Period").Activate
For rowworking = 3 To 15000
rollingperiodcountdown = Cells(rowworking, 9).....................
I'm looking to create a macro that copies a row of data and pastes it within a range when a condition is met. For Example, if A1 of the header Row matches A2 within a Range of A2:A100, I want to Copy the A1 Row and Paste Special Values over the Match in A2. Likewise if the match is contained in Row 100, I would like to Copy from A1 and Paste Special Values into A100.
View 2 Replies View RelatedI have a row of values TRUE and FALSE from a IF statement..
If one or more are true can i get a notification to come up saying
"Rents are Due" Press ok to continue..
Below is the data layout. I want to join values in value column if Condition is true. SO, for below situation answer should come ACE.
TRUE
A
FALSE
B
TRUE
C
FALSE
D
True
E
I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.
However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies View RelatedI deleted the data and made up some figures but kept the format to protect privacy. Highlighted blue and green because it's possible to have the same name have 2 different types. I put in dashed lines to more clearly divide months.
1. For each UNIQUE "Name" and "Type" add a new row starting from last entry
2. Copy A,B,C to new row
3. Copy LAST (most recent) "End Balance" from column "I" corresponding to last person
4. Copy column "I" formula into new role
So Name, ID#, type, column D and the formula in "I" (excluding "Name" and "Type" duplicates) should be added to the end of the sheet with their new row
Unsure if possible:
5. Make old amounts (columns D,F,H,I) not count towards the totals
6. Totals reflect new amounts only so values aren't counted multiple times
exampleforforum.xls
I Have workbook-1 with 5 cells and 10 rows and in 5 th (E) cell i have value of 1 or 0 .
i want to selectively copy entire rows which has value = 1 in cell(E) and paste these rows into 2 nd row(A2 cell) of workbook-2 using Macro
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone
Vodafone
Ericsson
Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
I have following excel sheet.
IF condition is true then popup message window with Remark of corresponding columns.
Example : if during market time if Google current price fall below 295 then message window will appear SELL : Day support is break.
===============================================================================
Script--------------Current Price--------------Trigger Price---------------------Remark
===============================================================================
Axis Bank--------------500----------------------502-----------------------Buy : Resistance Break
Google-----------------300---------------------295-----------------------Sell : Day Support Break
HCL--------------------850---------------------865-----------------------Buy : First Sunrise Confirm
INFY------------------3215--------------------3150-----------------------Sell : Weekly Support Break
Current Price will keep moving up / down in live market
if current price > Triger price then popup window should come with BUY & Remark of that row
if current price < Triger price then popup window should come with SELL & remark of that row
