I want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"
View 9 RepliesWhat I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies View RelatedHow do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies View RelatedI'm working this spreadsheet and i want to automate of deleting the entire rows once the last two columns contains both Zero values. the worksheet cotains thousands of row to clean-up.
View 3 Replies View RelatedI want a macro to delete the entire row based on the value in Column Q ....
View 14 Replies View RelatedIs it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
View 12 Replies View Relatedhow to delete duplicate rows except the first and the last rows using macro..
I have data like this and i want to delete those rows except the first and the last rows
31/10/2006
31/10/2006
31/10/2006
31/10/2006
I use the below macros from btadams posted 27th January 2003 but only for delete the last row
Sub DleteDups()
Dim Cell As Range
Do While ActiveCell.Offset(1, 0) <> ""
If ActiveCell.Value <> ActiveCell.Offset(1, 0).Value Then
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.EntireRow.Delete
End If
Loop
End Sub
complete this coding?
Sub DeleteBlankRowInColumnA()
'this macro scrolls down Column A if the cell is empty the row is deleted.
Dim A As Integer
A = 0
Do Until A = 142
If Range(0, "a1") = 0 Then
Selection.Delete shift:=xlUp
End If
Loop
End Sub
I have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project.
Row 2 is blank
Row 3 is blank
Row 4 is blank
Row 5, A5, contains the word Organization.
Row 6 is blank
Row 7, A7, contains a 6-digit number starting with 3.
Row 8 is blank
(all of the above starts over again (loops) approximately 30 times)
The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet.
I am aiming for:
Project
301111
Project
301112
Project
301110
(Repeat until finished)
Grand Total:
Here is the problem: i have two conditions to satisfy first is data from column A and second is data from column C, what i wanted to do is if both data from column A and B has the same other data in column A and C then sum the total in column D, F, I retain data for column B, E, G and H. Then delete the duplicate rows. By the way we also need to replace the remove the text (W1,W2,W3,W4 and W5) in column C.
View 6 Replies View RelatedI have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A
sku
3102-0400-100000
3102-0400-200000
3102-0500-100000
3102-0500-200000
3102-0600-100000
3102-0600-200000
3102-0700-100000
3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I have a worksheet with part numbers, and I want to delete all the rows with part numbers matching a part number in another workbook (I could import the list into the part number workbook in a new sheet if it makes it easier). The part numbers in the other worksheet would be in column A.
View 5 Replies View RelatedI would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
Having book1 and book2 (that is closed). Is there a way that if I erase a value "X" in book 1, update book2 (without open it) deleting the complete row/rows where the value X is found?
View 4 Replies View RelatedMy worksheet has a report name in cell A1, a brand name in B2, price name in C2, and color in D2. Row 3 has a table header in cell range A3:E3 followed by rows of table contents at the end of which is a row of empty cells. This sequence repeats itself for a new product: a row with the report name in column A, followed by a row with a new brand name, price and color in the same columns as before followed by the same table header and table contents. The number of products (with the previously mentioned details and table) vary so I would like to write a macro that is not dependent on a set number of products. Each table varies in the number of rows but never contains empty cells and always ends with a row of empty cells. I want to delete all rows with the report name and have all products in one table with the brand, price and color added to the table header and contents.
View 2 Replies View RelatedI browsed the first few pages of searching for "row delete macro" and couldn't find anything that suited my needs very much, so here goes:
What I need to do is automatically delete rows where the entries in column B (date) and column E (string) are the same. It is a very large group of data, so filtering is not exacly an option here.
Here is the twist on it...
I have a column F that contains either "Accepted-Active" or "Accepted-Closed". If I delete a bunch of rows that contain the same column B and E entries, I want to save the row that contains "Accepted-Closed", otherwise I don't particularly care which of the rows is saved.
How to create a macro that would highlight a row that has the following condition :
name
ref num
sam
123456
sam
123456
alice
342333
In this table, i need a macro that would highlight the row that has alice data due to it been having 1 ref number count under the ref num column. The macro should loop and end with msg " there are 'x' records having 1 ref number count"
In a particular sheet the data (with formulae) are present from rows E5:Q5000. I require a macro which automatically does the following:
- When user enters “submitted” in the row Column N, entire rows above that cell should be selected, and copy-pasted as values to remove all formulas. So if user enters “submitted”, at N31, then data set E5:Q31 should be selected and copy pasted special so as to retain only values.
-Finally the copy pasted data should be sorted as per the status of Column N.
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I have a spreadsheet that calculates percentages and then outputs the results to a pie chart. There are 9 different percentages being graphed in cells A41 to A49. The chart looks weird if any of the percentages end up being 0, so I have the formula set to add 0.00001 to each calculation (so they show up as 0% and display on the chart as 0%, but truly are 0.00001). I would like it so that if any of these 9 percentages ends up being 0 (or really 0.00001) that the row automatically hides and thus won't display on the pie chart. How can I create a macro that automatically runs to accomplish this, and automatically updates as percentages are recalculated.
View 3 Replies View RelatedI need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1 As Variant
Dim ar2 As Variant
Dim ar3 As Variant
Dim ar4 As Variant
Nr = 20
ar1 = Array(11, 14, 19, _
20, 22, 25, 26, 27, 28, 29, _
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
i wrote this macro and want to delete last two rows on active sheet this macro.
Sub deleteLast2Rows()
With ThisWorkbook.Worksheets(1)
Dim rowNum As Integer
Dim m As Range
rowNum = 2
Set m = .Range("A" & rowNum)
rowNum = rowNum - 2
EntireRow.Delete
End With
End Sub
I have a huge spreadsheet that I want to be able to sort through and delete the unwanted rows. I want to do a search for anything in column C that equals 2225 including the next row after and delete the rest. Here is an example...
View 3 Replies View RelatedI recorded this macro but I need it to delete any Rows that have the word "Normal" in column F
Sub Count()
'
' Count Macro
' Macro recorded 5/22/2007 by pricci
'
'
Sheets("Alarm Log").Select
Sheets("Alarm Log").Copy After:=Sheets(2)
Sheets("Alarm Log (2)").Select
Sheets("Alarm Log (2)").Name = "Count"
Cells.Select
Selection.Sort Key1:=Range("F2"), Order1:=xlAscending, Header:=xlYes, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I want to delete the rows if in "Column L" value is "Yes".
View 9 Replies View Relatedmacro to delete certain rows from a sheet based on the value of a cell?
I'm tryin to get it so if the value in "F" is NOT 150, 151, 152, 153, 154, then i want that row deleted.
this should leave me with data that contains either 150 - 154 in column F.
I have a table of data A2:H1000 (this gets longer every week). Within that data every so often i have a row which is blank from A:G, but has a value in H.
I want to create some code that checks the rows and if the cell A in the row is blank, to delete the entire row.
If I have a table (see below), is it possible to create a macro to delete rows that do not have defined data. In the example below, I would want to delete rows 4 through 7 as there is no date in Columns B through D.
A B C D
1 2008 100 200 300
2 2009 500 600 700
3 2010 800 900 1000
4 2010
5 2011
6 2012
7 2013