Making The #DIV/0! Error Blank
Jun 19, 2006
Im using the below calculation that keeps returning a # DIV/0! error if no data is present, so I have tried to use the ISERROR to make it blank, excel takes the below calculation but still shows the #DIV/0!
=IF(ISERROR( SUMIF('Data Input'!$I$2:$J$1000,AA5,'Data Input'!$J$2:$J$1000)+SUMIF('Data Input'!$I$2:$J$1000,Z5,'Data Input'!$J$2:$J$1000))/(COUNTIF('Data Input'!$D$2:$D$1000,B5)),"",(SUMIF('Data Input'!$I$2:$J$1000,AA5,'Data Input'!$J$2:$J$1000)+SUMIF('Data Input'!$I$2:$J$1000,Z5,'Data Input'!$J$2:$J$1000))/(COUNTIF('Data Input'!$D$2:$D$1000,B5)))
View 9 Replies
ADVERTISEMENT
Apr 15, 2009
How do you make a cell appear blank when it has a formula in it refering to a cell that hasnt been used yet?
I would like some cells to be blank instead of having #N/A in them.
View 7 Replies
View Related
Feb 19, 2007
I have a spreadsheet with about 1000 rows. This is data that I've imported from another source and there are blank rows scattered throughout. I am trying to add columns together, but when I cut and past the sum formula, I end up with a 0 in a cell that should be blank. I've tried various iserror, isblank, isnull, empty functions, but am still getting a 0.
Here my example of one function I've tried:
a b c
1. 50 50 50 =if(isblank(a1:c1)," ",sum(a1:c1)) 150
2. 20 20 20 =if(isblank(a2:c2)," ",sum(a2:c2)) 60
3. =if(isblank(a3:c3)," ",sum(a3:c3)) 0
I would like that zero answer in row 3 to be blank otherwise I have to manually go through all the rows and delete these 0's out or cut and paste the sum function just on the rows with numbers.
View 9 Replies
View Related
Feb 10, 2008
I have a conditional IF statement, where I want the content of the cell to be blank if the result of the IF statement is false, ie I want the content of the cell to be as if there were no formula in the cell (this if so that the formula COUNTA(Sheet1!$B:$B) only counts the cells where the result is TRUE).
For example, IF(A1=1,1,"") where A1 1, the content of the cell will have something in it (a space), and won't be blank.
View 9 Replies
View Related
Oct 17, 2009
The sub needs to do the following:
Needs to automatically check user-entered values in column F. If the value is greater than 0, it needs to multiply that value by -1. If the value is negative, or the cell is empty, it needs to do nothing.
I keep getting runtime errors about type mismatch.
Please look at my workbook and tell me where I'm going wrong.
View 6 Replies
View Related
Mar 25, 2013
I am using this code to make a new folder however if the folder already exists it gives me an Error 75.
Code:
Private Sub CreateFullFolder_Click()
'FIlE address needs to be changed
ThisWorkbook.Sheets("Details").Activate
MkDir ("C:UsersDennisDesktopPartnering Contractors LTD" & Range("B12").Value)
End Sub
View 4 Replies
View Related
Jan 16, 2009
I'm making changes to row A, but am getting an invalid outside procedure, not sure why. Don't even know what it means. It's not even in the same worksheet....
View 9 Replies
View Related
May 8, 2014
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
View 5 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
Jul 23, 2009
I have a simple average formula in a cell =AVERAGE(B3:F3). When the cells being averaged are blank, I get the error #DIV/0!. Is there an IFERROR formula I can use with my average formula to not show #DIV/0! when the averaging cells are blank?
View 9 Replies
View Related
Jan 15, 2009
I tried to read the post and figure it for myself, however close I have not been successful at eliminating this error(#div/0)in a blank fiield or field with a 0.
Below is the formula can someone please help with the IF portion that I can use to correct this statement. =SUM(B12:E12)/F12
View 3 Replies
View Related
Aug 8, 2012
I am using the following formula, and dragging it down,
'=IF(SUMPRODUCT($G$2:$G6=G6)*($Q$2:$Q6=Q6)>1,"duplicate","")
the first row gives Value Error, and the rest rows always blank.
Formula Error - #VALUE!
View 6 Replies
View Related
Sep 19, 2013
I have an Input sheet that I want to validate that the user has entered values in all of the fields before they move on. Data is in rows 5 to 25, but could be in any column starting from column d to the last column. My procedure is not producing the error message. My code is copied below
Code:
Sub InputError()
Dim j As Integer
Dim cell As Range
j = 4
Sheets("Input").Select
[Code] .......
View 9 Replies
View Related
Feb 24, 2009
I'm trying to to create a formula where if two different cells have no value (K10 & O10) a third cell will also be blank (N10)
I have the following formula which follows these steps when i evaluate it.
=VLOOKUP(K10&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&" ",$J$77:$K$98,2,0)
=VLOOKUP(" "$J$77:$K$98,2,0)
#N/A
How can i deliver a blank cell as the answer?
View 9 Replies
View Related
Oct 9, 2008
When I enter this formula I get a #VALUE! error. I think it's because cell AG46 has an IF formula that results in "blank" if 0. How do I fix this error so that it includes cell AG46 and if cell AG46 is blank it counts it as a zero?
=SUM(A12)-(AG46*8)(=40 is the answer I'm looking for)
=SUM(40)-(0*8)
View 3 Replies
View Related
Aug 27, 2009
I want a cell to be blank if the sum is Zero. I am getting a divided by zero error, I tried this formula: =IF(SUM(C6/D6)=0,"",SUM(C6/D6))
View 4 Replies
View Related
Jul 13, 2009
I have this code that I have had for a while.. it works okay on my computer and does as intended... it deleted all empty rows in the selected range after checking to see if any cells contain anything that makes it look blank but isn't (it cleans those cells).
So on my computer it works... on a coworkers computer it converts every used cell in the usedrange to #VALUE...
View 14 Replies
View Related
Apr 3, 2008
I'm trying to run this macro and I keep getting the "Run-time error '1004' Application-defined or object-defined error"
I am just trying to hide the rows that do not contain anything in them with this
x = 2
Sheets("sheet2").select
If Cells(x,1).value = "" Then
Rows("x:x").select
Selection.EntireRow.Hidden = True
Else
x = x +1
End if
The line that is giving me a problem is "Rows("x:x").select". but when i change x to an actual number, it works. I cannot have a definitive number because where there is data will vary every time this is ran.
View 9 Replies
View Related
Jul 15, 2006
I've managed to set up a gradebook.
However, is there a way that I can get Vlookup not to return N/A when I have a blank cell on the report (not in the data table). I want to be able to calculate the progressive grade average of a stduent as the year progrsses.
View 9 Replies
View Related
May 19, 2008
I'm looking for a function that will display the average of a row of cells, while at the same time not displaying any error messages. It's easy to average cells without blank values, but to combine that with no errors is difficult for me. I saw many ways to do the average, one of which is:
= SUM(A1:E1)/COUNTIF(A1:E1,">0")
That function doesn't work for a row of blank cells (i.e., hidden rows), though. The result is an error message.
I also read about a way to ignore an error in a computation:
=IF(ISERROR(F1),"",F1)
The problem is when I combine those functions I get a blank cell no matter which function I put first, and without regards to cell values or not. The reason I want this to be error-free is that I have to average the "average column" at the bottom of the table, too (i.e., F100).
View 9 Replies
View Related
Aug 3, 2012
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
View 2 Replies
View Related
Mar 10, 2013
I got a macro connected to a button that select empty cells within a range and fill them with the value above. The code looks like this:
Code:
Range("A1:A10").SpecialCells(xlCellTypeConstants, 23).Select
Selection.Resize(, 4).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
[Code] .......
If you press the button twice you will get run-time error 1004 becuase Excel can't find any empty cells.
I want a function that counts blank cells before running the macro. If there are no blanks I don't want to execute the macro. That is to avoid run-time error 1004.
View 7 Replies
View Related
Feb 14, 2014
I have a very basic code to copy "non-blank" data from one sheet and paste to another. The code is not complete yet - I am running in debug mode I get the above error. My code is as below.
Sub SampleFind()
Dim StrWord As String
Dim Quantity As String
Dim i As Long
Call nrows
For j = 2 To 2
For i = 2 To nrows1
[Code] ..........
View 4 Replies
View Related
Jan 29, 2010
I know different variations of this question get asked all the time... but I can't find an answer that I'm sure will *always* do what I want.
I have a range of cells (A1:A10), and I want to count all the text entries of positive length. That is to say, I don't want to count:
blanks
numbers
zeros
spaces
errors
I'm sure I need to use the LEN function, but I can't quite figure out how.
this counting expression will be inserted in a SUMPRODUCT formula
View 10 Replies
View Related
Oct 24, 2013
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
View 8 Replies
View Related
Feb 3, 2010
I am making a simple map in excel. I have my floor plan on sheet 1 and the location of product on the floor on sheet 2.
Currently I have some formulas on sheet 1 that link to some sales data on sheet 2, but what I would really like to be able to do is use the search function on page 1 and it give me the location of the products in a given area.
The data is broken up into group location on the second sheet.
View 11 Replies
View Related
Feb 6, 2010
I have four columns containing about 200 addresses.
A Names
B Streets
C Cities
D Phone no.
If I write a name in D1 I want to get the corresponding street, city and phone no. in E1, F1 and G1.
I also want to copy the formula downwards let's say ten times so I can make a list.
If I for example just want to make a list of three names (D1-D3) I want the rest of the fields to stay blank.
View 6 Replies
View Related
Aug 2, 2007
I've created an Add-in (.xlam file) in Excel 2007 and installed and activated it (it shows up under "Active Application Add-ins" on the Add-in menu for new workbooks).
I can see the macros and code when I go to the VBA editor, but the macros don't show up in the regular macro list.
I know that I can write code for the new workbook that will reference the Add-in code, but I want other users to be able to install the add-in and run the macros in it right away without any knowledge of VBA. Is there a way to make this possible?
View 11 Replies
View Related
Feb 11, 2008
i made a claculator in vb.net, and now i have to make one in vba, what i did was as follows, first ill post the code from last year, then my vba attempt;
View 14 Replies
View Related
Mar 14, 2007
I have a spread sheet that tracks progress reports that are due every 90 days. I have a due date colum that will automatically get high lighted if the 90 days have passed to inform me or my staff that the report is late. I would like to have a colum with a button in each row that allows the reader of the spreadsheet to press "YES" for that accont's progress report having been turn in. When the "YES" button is pressed the date due date column advances to the next 90 day due date and the highlight would turn off.
I used the conditional format to change the due date column to Yellow if =TODAY() is less then or equal to the due date. But I can figure out a way to select something and turn the highlight off and advance the due date to the next 90 day due date.
View 9 Replies
View Related