Attached is a sample file.
I can't figure out a formula that will match either 1,2,or0 in column K and offset to corrosponding value in column B. Then average of all values that came up.
how to accomplish this. VBA is acceptable, but formula is prefered.
0.644
0.627
0.641
[Code]....
I have some data which I update every now and again. Then I extract and clean up and currently have it output to 4 columns.
The four columns currently looks like this:
A | B | C | D
1 name name2 stats stats2
2 ....
3 ....
Each column is then populated with a decent amount of names and stats, and the same name occurs multiple times. I'm looking up a specific name in the A column, and can extract the stats in C fine using INDEX/MATCH, but it only returns the data from the first instance the name occurs. I've googled it a bit and believe I could possibly wrap my head around returning multiple instances.
However, there are a couple of other criteria for my extraction of the stats which makes me believe I'm in way over my head. The data is in chronological order, with the newest on the bottom. I'm wanting to extract the stats in inversed order so starting from bottom going upwards, if that makes sense. Further, preferably I'd want to limit the amount of extraction to X amounts. And lastly to make it really complicated, for the newest entries stats are not yet available so only the names (column A and B) are populated, I need it to skip those entries, since, obviously, there are no stats there to extract, and I wouldnt want to end up with a lot of blank cells in my summary.
I have in col J a series of values, these can be negative and positive numbers of any value. In col D I have the time (starting at midnight each day) that the values occured in col J. I am trying to look down col J until a value >= 50 is reached, I then want to look across at the corresponding cell in col D to find out what time this event occured. So, if a value of 50 or more is found in cell J232 for instance, I want to look across at cell D232 and extract the time found in that cell.
View 2 Replies View RelatedI need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
Below is a table of data I am trying to sum. In the first column, is the account code, second column has the Hotel number code, third column is the description and the 4-6 columns have amounts for March, April and May.
I am trying to sum the data for March, April and May for account 107000 using this formula, but it is only picking up the first row.
=-IFERROR(SUM(OFFSET(PnL!$C$9,MATCH($A29,INDEX(PnL!$A$10:$A$500,0),0),1,1,ControlMonth)),0) to sum
FYI:
PnL!$c$9 = is the block referred to as C9 below
$A29 contains 107000
PnL$A$10 is the block below A9 below
ControlMonth is currently set to 3
[code].....
I want to find a string Variables via Find Method . Once this string is found, it will output the offset cell string. For example, in the attached file. i would want to find the string "ggg", once found the code will output the string "xxx"
I tried using the below code but it didn;t seem to work.
If Cells.Find(What:="ggg", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False).Activate Then
File_array(1,1,1) = Cells.Offset(0, -3)
End If
Msgbox(File_array(1,1,1))
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
i've got two textboxes and a command button on a userform.
Textbox1's value is "A" Textbox2's value is "B".
On commandbutton_click, i'd like to search down column P for textbox1's value.
then offset -5 to column J and insert textbox2's value.
Then Next search for the next textbox1's value and replace the offset again until all values have been replaced.
I've done the searches and not sure exactly how to go about it, it seems so easy but i'm getting tired of looking at this project.
The attached workbook has two tabs:
1. Burn Rate - this is where I need my formula to calculate
2. prorder - this is where the table will be
What I need:
1) from 'Burn Rate', get the 'PO ID' we will look up in the table.
2) go to 'prorder' - when the 'PO ID' there matches that same 'PO ID' from the other worksheet - take the value in column F - this is the number that will be averaged.
In other words - in 'Burn Rate', for a given 'PO ID' (column A), I want to average all of the values that are found in column F in 'prorder', and return that average to 'Burn Rate' (column B).
I have an excel sheet with multiple columns. In one column I have X's and in another I have a limit. I need to look down the stuff column, find every X, match each X to its corresponding limit and then compare all the limits and return only the smallest limit found. I.e if I was looking down the stuff column I would find 4,6,8,8,3 and thus I would return 3 as my value. I am very new to working with excel formulas,
limit
something
stuff
4
x
[Code]....
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedWhat I am trying to achieve is to get the UserForm to populate from information in the Database. In column AD I have a formula which produces a number when an item becomes due. I would then like label1 (lblReg1) to populate data from the same row in column A and label2 (lblDate1) from column S.
I then have a CheckBox (chk1) next to each pair of labels for the user to confirm the task has been actioned and when the CommandButton is clicked I would like the result placed in column AE in the corresponding row.
I have tried utilising code from another userform I have but I cant get it to work and I believe this is to do with the 'ActiveCell' reference as there is no Activecell (you can probably guess I am new to this). Example:
Sub UserForm_Initialize()
If Sheets("Database").Range("AD3:AD5000").Text = 1 Then
lblReg1.Caption = ActiveCell.Offset(0, -29).Text
lblDate1.Caption = ActiveCell.Offset(0, -11).Text
Me.chk1.Visible = True
End If
End Sub
(All the Labels are blank and will be filled hopefully by code, all the CheckBoxes are set to Visable = False at Initialize stage, I will be using Me.Height = ?? to expand the form to visible check boxes)
I have attached a small selection of my workbook where I have set up the userform and named the labels.
Can anyone amend the code to achieve the desired result or alternatively put me straight on the correct way to do this.
sorting data I use in a workbook for athletics. I've really chopped down my workbook for upload, In the worksheet "Leaderboard" I can call up stats for different lifts, and it finds (in this case) the top 5 lifts and the names for the kids that have those corresponding lifts.
My problem is that when two or more kids have the same lift, it will only call up the name of the first instance of that lift. You can see this in the "Leaderboard" worksheet, and the name "Adams, Andrew" appears for both lifts of 75. I would appreciate any help on how to correct this, as I've searched the Internet for weeks now looking for a solution. I've tried experimenting with different things as well, all to no avail.
I recently asked how to locate a max value within a variable range using a macro and got the following responses: Get Maximum Value From Graph / Chart, all of which worked great.
Dim r As Range
Set r = Range("D2", Range("D50"))
Range("K1").Value = Application.WorksheetFunction.Max(r)
Range("Max1") = Application.WorksheetFunction.Max(ActiveChart.SeriesCollection(1).Values)
Start = "D24"
Finish = "D163"
Range(Start, Finish).Select
myrange = Selection.Address
Range("Max2") = Application.WorksheetFunction.Max(Selection)
Now I would like for a different cell to return the time value located one column to the left of the max value found above. I've tried to adapt other offset formulas that I've found to my purposes and haven't been able to make it work. how to do that using the max value as it is found in any of the above three ways
I'm writing some code where I need to know the column in which a specifc text string occurs. Because of the nature of the sheet, the string will only appear in one column, but that could be in almost any column on the worksheet.
For example say the text string is "Year 1", I need to find the column with this string, and then offset down to a predetermined row, or offset over to the appropriate column (something like below).
With Selection
.Offset(0, x).Select
If List.Selected(0) = True Then
y = i - 1
With Selection
.Value = Salary * Inflation1 ^ y
End With
Else
If A1= 5 ; C1= #N/A ,F5= 7 and E7= 8
Any formula which can average if isnumber A1,C1,F5,E7 ?
it shall ignore errors in this case.
building a spreadsheet to track instructors' classes' test scores. I have 3 basic variables: 1.) The instructor's name 2.) The course taught, and 3.) The classes' scores for that particular course. The 3 courses each have 3 different variations of the end-of-course test (9- total tests.) On the last page of the excel spreadsheet, I have a block for each of the instructors. I've been trying (with no success) to keep a running average of each instructor's class test average for the 3 courses. The part that is stumping me is associating the instructor's name with their class average, and then averaging all of their grades on that page together; the main reason being that this document is living, and new grades are entered almost daily. I tried using variations of the count function with no luck, other than to tell me how many times a particular instructor has tested in a particular test. Please help, I have the feeling that the function I am looking for is way-above my skill-level in Excel.
View 9 Replies View RelatedSheet 2 is the problem.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have included a sample.
This code inserts a new column to the left of Column CV ...
View 6 Replies View RelatedCell C6 contains a drop down from which a month can be selected, range is Oct-12 to Sep-13
Column AB will contain a YTD sum of actuals, Column AC will contain sum of budget.
For example,
Actuals: If Mar-13 is selected in cell C6, I would like cell AB10 to sum D6+F6+H6+J6+L6+N6
Budget: If Mar-13 is slected in cell C6, I would like call AC10 to sum E6+G6+I+K6+M+O6
2nd scenario
Actuals: If Jun-13 is selected in cell C6, I would like cell AB10 to sum D6+F6+H6+J6+L6+N6+P6+R6+T6
Budget: If Jun-13 is selected in cell C6, I would like cell AC10 to sum E6+G6+I+K6+M+O6+Q6+S6+U6
I've been reading up about an offset function but can't get to grips with it - should I use that, or an index/match mix?
I have 2 columns of data (col A is time, col B is a value), in a range A4:B1000 (can be less, but the biggest the range will get is to B1000). Example:
A / B
4 10:37:55 / 91
5 10:37:56 / 92
6 10:37:57 / 93
7 10:37:58 / 100
8 10:37:59 / 105
9 10:38:00 / 110
10 10:38:01 / 111
11 10:38:02 / 115
12 10:38:03 / 120
Im looking for a way in VBA to look for a time entered in cell C1 (example 10:38:00), find that in column A, then return the average of values in column B that are offset 271 - 300 rows. This is entered in D1. So in my example, 10:38:00 is in cell A9, return the average of B280:B310.
I am trying to compare a single cell's Value in 1 worksheet to try to find a match in another column (or a range of cells). If I find a match I want the result to be a 1 and if it is not found then a 0.
Is this the Lookup function?
Column A would be Recipe Numbers, Column B the Planned Total.
I want to search column A for all matching recipe numbers.
Then, any recipes that match, look in column B for the planned totals, adding all incidents where they match.
Then the most difficult part, which just occured to me now.
I only need the Total Planned Total and Recipe name reported once.
Recipe#..........Planned Total
450................100
600................75
620................125
450................50
620................180
450................100
600................200
450................110
I will not be able to sort these lists.
If-Match-Sum? to display:
Recipe#............Total Planned Total
450....................360
600....................275
620....................305
I've researched for the first part... and it seems like Match will only find the first match and not look further? Am I wrong on this?
How to display the results hadn't even occured to me yet, since I was still trying to figure out how to GET the result.
I have a sheet that column G and column H has duplicate values. I would like to be able to put a formula in a cell P4 that will search thru column G and column H and if there are any matching items then add the corrisponding number in column I.
So say cell G8, G25, and G30 have the same and H8 and H30 have the same value, i would like this to add the values of cell I8 and I30.
Windows XP
Excel 2003
In one sheet I'd like the user to select from 3 dropdown lists certain predefined values.
On the second sheet there is a long list of unique cells (one column, that can't be split into usefull columns with text to columns or something). I want to find the cell that holds the three text choices. These can be in different order to make things more complex. How do I create a search that finds that one match.
Example
The user selects "AAA" and "DDD" and "FFF" from the dropdown lists
The formula should find that one cell that holds this value: "FFF JJJ GGG DDD CCC AAA". This is the only cell that holds all three chosen values in one text. In the end I would need to have the row number of that cell,
I'm trying to extract the selected suppliers orders from a 1000+ rows list ; like appearing with the example of supplier "D" ; and the new one should be dynamic , it means if any data added to the source orders list and if the supplier was one of the selected the new table automatically update ; or can be refreshed
View 9 Replies View RelatedI'm trying to lookup a string in a column from another sheet and than return the row on which that string was found. I have two files, one in which my OFFSET/MATCH worked and another in which they didn't work properly.
My problem is this: I have multiple instances of a string in a column and i want to get all the info on that string (the rest of the columns). Let me explain in examples.
In column A on Sheet 2 i have
4 2 4
2 3 4
5 3 2
2 2 2
4 1 3
I need to have in Sheet 1:
4 2 4
4 1 3
Where the first 4 (bolded) is the reference value.
In sheet 1 i have a column A2 which is the reference. In column B2 i have
=MATCH(A2;'Sheet 2'!A1:A16051;1) - this worked on a file but returned a bad value on the other (donno why)
In the second file i used =MATCH(A2;'Sheet 2'!A2:A10552;0)+1 which returned the good value.
For the second value (row 4 1 3) i used =IF(OFFSET('Sheet 2'!A1;B2-2;0)=A2;OFFSET(Sheet 2'!A1;B2-2;0);0). This worked well on the first file but didn't work on the second.
I got the commands above from someone that used to update this file so i don't know exactly how they work
=IF(MATCH($A7,$BX$15:$BX$112,0)>150,"",OFFSET($BX$14,MATCH($A7,$BX$15:$BX$112,0),1))
If there is not match, I get #N/A in the cell. I would prefer to get a value of zero (or ""). I've been experimenting with ISNA and ISERROR.
When an exact match to the lookup value is not found, the function goes to the highest value that is less than the lookup value.
What do I do if I want to return the closest value, but not less than the lookup value?
For exampe, in my screenshot, if my lookup value is 6 horsepower, I want to return the efficiency for the next highest value (if no exact match) for 7.5 HP. Function would return 89.5
VLOOKUP.jpg