Match (text) Numbers To Numbers From One Cell To Another
Oct 12, 2006
I need the " solutions cells " to match to the " source cells " and return a " yes " or " no ". in cells d4:d10. Ex: #1 cell C4=01234598, it will conduct a search & match of cell A5 which contains the number 123, since cell C4 contains all 3 numbers from cell A5, then the formula would result in a " Yes ". The match has to contain all 3 numbers from the solution cells to the source cells.
Ex: #2 cell C7=67891234, it will conduct a search & match of cell A8 =901. Since cell C7 only contains the 9&1 from cell A8, it would return a " No " because cell C7 did not contain all 3 numbers from cell A8. I'm not sure if the IF, Match, Index or Count formula is the right one to use, they all seem to partially work, but still don't complete this problem.
View 4 Replies
ADVERTISEMENT
Mar 25, 2014
I am looking for a formula to grab only the numbers withing a cell that has text in it i.e (John Peters142 lp) or (Sally Jones54) or (Terry Cram310 jkb) sometimes there will be text after the number and sometimes not, the format is as shown with no space between name and number but a space after the number.
I added a sheet for visual example.
View 2 Replies
View Related
Aug 20, 2007
In column 1 are 220,000 words (that's a lot ), every words corresponds to a number between 1 and 13 in column 2. Now i want to recode texts (column 2) using the codes in columns 1 and 2. I could insert all text in one cell, or i could insert each word in one cell. Then I want to calculate the sum of the corresponding values (column 2) of all the words (column 1) for each time they occur in the text (column 3). In other words, i want to recode text to numbers and i want to calculate their sum.
View 2 Replies
View Related
Oct 31, 2010
multiple numbers and text are in single cell which are separated through spaces or comma, is there any formula which can bypass text and add all the numbers in the cell.
For example:
red 12, yellow 10, green 5 27 red 3, blue 9 12 yellow 21, blue 3 24
View 9 Replies
View Related
Feb 20, 2013
I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?
View 3 Replies
View Related
Jul 19, 2014
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
View 14 Replies
View Related
Oct 22, 2009
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
View 2 Replies
View Related
Feb 23, 2010
The format of the text in which I need to extract numbers is as follows:
23411268 - 23411270
Need to extract the following:
23411268
23411269
23411270
These numbers have to be listed in three seperate rows.
View 14 Replies
View Related
May 23, 2014
I have been looking through the forums and found the below code, but I have both text and numbers in the same range. I have attached an example of what I need to have converted.
Book1.xlsx
View 3 Replies
View Related
Jan 27, 2012
I have a text string in cell A1 as below:
repairs booked in Dec,11 (INR 37k)
training fees Dec,11 (INR 42k)test Fee Reimb for 03 emp Dec,11 (INR 56k)
skill fees booked in Jan,12 INR 52k
Reimb for 01 employee in Jan,12 INR 8k fee accounted- xyz INR 250k, Quick solutions INR 52K, ABCD India INR 272K, Layer Technologies INR30K and complex mgt INR 21K
Note: (INR 37K) means negative number i.e. -37
Now my task is to manually total the above amounts in calculator, i.e.
-37-42-56+52+8+250+52+272+30+21 = =550
like this there are 100s of cells, could derive a formula for this task.
View 9 Replies
View Related
Sep 26, 2012
A
B
C
D
E
F
G
23445566894 Brwn pdc aft
Cat1
45687930596
$5
45687930596 Gld wdget adi
Cat2
23445566894
$6
In the example above, I would like to do a vlookup in column C that matches the digits in column A to those in column F, with the output being the corresponding value in column G. I believe it involves the left function but not sure how to really use it here.
View 9 Replies
View Related
Jun 27, 2013
I'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
View 1 Replies
View Related
Nov 13, 2013
I am looking for a VBA to sort rows which include actual numbers and text representing decomposed CTQs (or procedures in IT development)
Code:
Col A Col B
1Billing Accuracy
2Billing Time
3Credit Check Accuracy
4Credit Check Time
2.1Bill preparation
[Code]....
This is the order in which the data is copied and saved from worksheets in which they are developed. Note that 3 rows (8.1.2.1 through 8.1.2.3) are below 8.1.3 (because the three come from Worksheet 8.1.2 which came after worksheet 8.1). The first four rows came from a Top Level Worksheet. I would like to see them intermixed but in proper order.
View 9 Replies
View Related
May 3, 2006
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
View 8 Replies
View Related
Feb 9, 2007
I'm looking for the VBA command for this function. I tried just recording a macro in where I perform the task but it didn't record anything. Tried it several times even.
View 7 Replies
View Related
Jan 16, 2008
See attached file. A colleague is downloading rows of data from a website which contains a number field Excel is currently treating as Text after being pasted in. My spreadsheet includes just a sample of the many rows of data however as you can see the VALUE function refuses to convert these text values to numbers. How these might be converted and why the VALUE function refuses to work in this case?
View 5 Replies
View Related
May 27, 2006
we work with both Lotus 123 and Excel 2003. Lotus will be gone next year, but for now, the official mean to publish our reports is Lotus. With my work, I copy/paste a Lotus page to Excel. I use the following macro to convert Lotus format numbers (which Excel considers as text) to real numbers:
Sub ForceToNumber()
Dim wSheet As Worksheet
For Each wSheet In Worksheets
With wSheet
. Range("IV65536") = vbNullString
.Range("IV65536").Copy
.UsedRange.PasteSpecial xlPasteValues, xlPasteSpecialOperationAdd
End With
Next wSheet
End Sub
Source : http://www.ozgrid.com/forum/showthre...087#post184087. The problem is that I need to send back this data in Lotus. Excel considers decimal numbers with a coma as real numbers and numbers with a dot as a text. This previous macro fixes that. However, Lotus works the other way. Only numbers with a dot are considered real numbers. So I would need to find a way to code a macro that converts any numbers in the Excel sheet to a number with a dot. It's a bit like doing the opposite operation.
View 3 Replies
View Related
Aug 26, 2006
The back story is that from a system we use, when you download data from inside it, Excel treats most of the cells with a "Number Stored As Text" error. I had problems with this and it was just generally annoying so I wrote the below macro that converts each of the cells back to general cells and reinputs the data, essentially reseting the cell and keeping the data. Being that this is a loop, it takes a good while to run if alot of data was downloaded. Any idea's on how to speed it up besides screen updating? Note, other stuff happens in the first macro, but it is just cosmetic non-intensive things. It calls the second macro because I wanted them seperate should I want to just run the second.
Sub CleanData()
Application. ScreenUpdating = False
' Find the Right most cell and the Bottom most cell and
' run the macro from A1 to this cell recursively
Range("IV1").End(xlToLeft).Select
Col = Selection.Column
Range("A65536").End(xlUp).Select
Row = Selection.Row
Range("A2").Select
Range("A1", Cells(Row, Col)).Select
Application.Run ("FixTextAsNumberError")
Application.ScreenUpdating = True
'
End Sub..............
View 5 Replies
View Related
Sep 29, 2007
I have the following two macros that I use daily:
Public Sub add_tick_marks()
Dim c As Range
For Each c In Selection
If Not IsError(c.Value) Then
If Left(c.Value, 1) <> "'" And c.Value <> "" Then
If InStr(c.Value, "E+") > 0 Then
c.Value = "'" & c.Formula
Else
I use these because I frequently copy billing account numbers that have leading zeros from some proprietary software and work with them in Excel. I need the leading zeros to facilitate VLookUp's. When I paste the data into Excel it truncates the leading zeros. My typical procedure is:
1. Copy a column of values from our proprietary software
2. Paste it in Excel (Ctrl+V)
3. While newly pasted data is still selected I hit Ctrl+1 which brings up the Format Cells form.
4. I double click "Text"
5. I re-paste into Excel (Ctrl+V)
6. I run my macro to add tic marks to the values so the leading zeros never get lost.
The problem occurs when I copy multiple columns of data and paste it in Excel. If one of the columns of data contains numbers or currency then I select that range of values and run the macro to get rid of the tic marks. After running the macro the numbers are still treated as text. When I select a range of those values and right-click on the status bar and select " Sum" there is no value. No big deal, I just highlight them and format the cells as numbers or currency. But after formatting them as numbers or currency, they retain their format as text until I click in the formula bar for each individual cell and hit enter, at which time they take on the number or currency format I have chosen and the sum can then be displayed in the status bar.
How can I force the formatting I chose to take effect on the data immediately without me having to individually "fake change" the data in each cell?
View 3 Replies
View Related
Nov 21, 2007
I have text as numbers downloaded to excel sheets from crystal that i need to add together on a summary sheet. I've tried using Value, TRIM and CLEAN functions to no avail. the TYPE function is reading the cell as Text and I have also tried multiplying by 1. Does anybody know how I can get around this ? hopefully I've attached an extract of the file
View 4 Replies
View Related
Feb 27, 2014
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
View 7 Replies
View Related
Mar 5, 2012
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
View 4 Replies
View Related
Jan 22, 2013
I have a column of numbers that may range from 7 to 8 but i need to tack on zero's at the end so that i have a total of 22 characters. What formula could i use?
View 2 Replies
View Related
Apr 10, 2014
I need to get a code that will just read the text in a cell that contains text and numbers example abc123 I want it to only read the abc as the numbers can change and cant write them all into my macro all the time.
View 9 Replies
View Related
Jul 11, 2012
I'm trying to extract the numbers from a cell containing both numbers and text. In other words, say the current selected cell contains: "63.0 Vac", I would like to store the 63.0 in a variable using VBA.
View 8 Replies
View Related
Nov 14, 2006
I have several cells I need to sum that are MB K size related. IE.....
Circuits per Router....
155 MEG
85 MEG
100 MEG
768 K
512 K
76 MEG
need to total these
add up the MEG as 416MEG
and the K 1.2MEG
Total 417.2MEG
View 3 Replies
View Related
Apr 11, 2007
I've got two spreadsheets one with a load of names and a blank column I need to put mobile numbers into, and a second with a column with names and numbers and a second column with mobile numbers.
About 90% of the people have their mobiles listed in the second spreadsheet, so I've done a VLookup to match their names and if it does match, stick the mobile number into the spreadsheet.... however...
A big proportion of the cells have a name and a user number in the same cell, separated by a comma ie
John Brown, 1048456
So when Vlookup tries to match the above with 'John Brown' in the second spreadsheet it fails.
View 7 Replies
View Related
Jan 8, 2014
I have a column that looks like the following and I need to add the numbers:
27 skids
31 skids
56 skids
13 skids
The unit "skids" is constant. The answer I am looking for is "127" or "127 skids"
View 3 Replies
View Related
Jun 5, 2014
If I input "wd" to cell d4 I want it to look up say E4 to E20 find the highest and add 100 and change the wd to "1234"
View 3 Replies
View Related
Aug 4, 2014
Is there a formula or function that I can use that will allow me to split data like below into two separate cells?
In one cell, I have - Narre Warren Black 6.8-44 & in another cell - Pakenham Maroon 5.4-34 just as an example. (There are quite a number of cells like this) I would like the cell split to show - Narre Warren Black in one cell and then 6.8-44 in the next cell. The same is needed with the following cell - Pakenham Maroon in one cell and 5.4-34 in the next cell.
Because some have one space and some have 2 or 3 I can't use 'LEFT' and I can't use Text to Columns as far as I can see.
View 4 Replies
View Related
