Matching Values Form Different Tables
Jul 18, 2014
I have two tables with information I need to combine.
Table 1 has the cost for each of the visits made by patients for each clinic/site:
Clinic/Site Number
Visit 1 Cost
Visit 2 Cost
Visit 3 Cost
Visit 4 Cost
1001
2,000
1,000
1,000
1,500
[Code] ........
Table 2 shows the dates each visits happened, for each patient of each clinic/site :
Clinic/Site
Subject
Visit 1
Visit 2
Visit 3
Visit 4
1001
001
Aug 2013
Oct 2013
Nov 2013
Dec 2013
[Code] .........
Table 2 will be updated on a monthly basis with new patients and new visits. Table could also be updated if new clinics are added. The tables are from two different sources.
I need to combine the two tables so I can then pivot and have a sub-total per month, per site and grand total per month. I tried match, Vlookup, combining the two but I am getting lost.
View 5 Replies
ADVERTISEMENT
Feb 27, 2014
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1:
50025
50026
50086
Table 2: Considering that name, age and location is each in separate cell
50025JohnSecond25Location 1
60085EmilyThird 20Location 2
45454Wilhelm Fourth35Location 3
10000RoseFifth 60Location 4
50086JohnySixth 45Location 5
65501JacobSeventh18Location 6
50026Jackie Eighth22Location 7
And the outcame should be that it finds the value from Table1 in Table2 and copy's information in Table 1 like this:
50025 JohnSecond25Location 1
50026 Jackie Eighth22Location 7
50086 Johny Sixth 45Location 5
View 2 Replies
View Related
Sep 30, 2013
I have two tables. One has long list of numbers, and the other one has lesser. I'd like to match the identical numbers in both tables. By the way the first table has 14600 cells and the short one has 1466 cells.
1424771
1424782
1424772
1424786
1424773
[code].....
View 9 Replies
View Related
Jan 27, 2014
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
View 6 Replies
View Related
Jul 14, 2014
I have two tables, both contain a column of ID numbers and a column of addresses.
I would like a method to match the IDs from table1 to those of table2 - if no matches are found, search for matching addresses, if a match is found then output the ID in table1, the address, and the corresponding ID in table2.
If still no matches are found, output the ID and address from table1 and indicate that it didn't match.
Then I want to check table2 records - i.e. search for matching address between the records and output the table 1 ID, address and table2 ID were partial or no matches are found, as above.
View 3 Replies
View Related
Jun 9, 2013
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. Please note that there is no fixed number of inputs for any one group i-e the solution has to be dynamic.The groups are numbered from 1 to 6 and number of groups is fixed i-e 6.
A sample file illustrating the inputs and required output is attached.
I also posted this on: [URL] ....
Sample_file_summary.xlsx
View 2 Replies
View Related
Jun 9, 2013
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group (from a drop down) which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. There is no fixed number of inputs for any one group i-e the solution has to be dynamic.
Attached is a file illustrating the inputs and the required output. I would prefer a formula based approach but not against VBA based suggestions either.
Sample_file_summary.xlsx
Also posted at: [URL] ....
View 2 Replies
View Related
Jun 28, 2012
I have created the code below to create a Pivot Table using VBA, so that it populates from a list box option.
I would prefer if it didn't show any subtotals and was in a tabular form. It keeps dropping off at that point for each row field.
CODE
Sub trail()
'
' trail Macro
'
'
Dim wksPivot As Worksheet
Dim wksData As Worksheet
Dim pc As PivotCache
Dim PT As PivotTable
Set wksPivot = Sheets("PIVOT")
[Code] ......
View 2 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
May 15, 2014
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
View 5 Replies
View Related
Aug 3, 2006
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
View 2 Replies
View Related
May 5, 2009
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies
View Related
Jul 19, 2005
I have a list of purchase order line items. Each Purchase order could have multiple line items, so the list could have many occurances of the same purchase order number. I have designed a pivot table which summaries line items by ordering area (one of the fields in the list).
This works fine but what I would also like to check is the number of purchase orders by area. How can I acheive this? I would prefer not to use any helper columns but will adapt my application if this is needed.
View 8 Replies
View Related
Jan 9, 2013
I'm trying to make a macro that match table in sheet "Vocabulary" to the second table (columns Q,R,S,T) in sheet "Overview" and compute correct values in column U using weights from column F, sheet Vocabulary on values from a corresponding cell at column M, sheet Overview. The entries for every ISIN in the sheet Vocabulary are in no particular order and some positions from sheet Overview don't have to exist in Vocabulary at all (but I still need them to display in the table on the right to be able to make charts from summing these categories).
Portfolios.zip
How should the end result look like is displayed on the last sheet.
View 1 Replies
View Related
Jul 17, 2012
If I update my data, then refresh the pivot table, old values still show as an option. How can I delete these items? If it matters, my pivot table's name is PivotTable2.
View 1 Replies
View Related
Jul 23, 2012
I want to write a interface program using VB Macro, for updating the Excel Table values into SAP Tables. Is there any macro that can do this work?
View 4 Replies
View Related
Aug 22, 2013
how to return values based on some conditions.
So for the sake of this example i have two cells lets call them J1 & J2 , one with the client name and another with State (matches the table name)
How can i get it so when i type in say Client 1 & Table 3 it will return the information in client 1s column into table 1s rate column. Obviously i want to be able to type in any clients name / table and have the same thing happen.
the red is what i want returned into table 1s rate column
Table 1
Table 1
Table 2
Table 2
[Code].....
View 1 Replies
View Related
Jan 27, 2014
Code:
tblCluster
Jan-14 Feb-14 Mar-14
Salary 10,000 20,000 30,000
Jan-14
Feb-14
Salary 30,000
I have a table above (in red), as an example, my actual table goes out 60 months.
Where the Green Value is, I need a formula that will reference the two months above it (They could be any of the 60 months), that will then sum the salary from the table between the selected two months (including these months)
I have tried,
Code:
=SUMIFS(C6:BJ6,
tblCluster[[#Headers],[Jan-14]:[Dec-18]],">="&'Cluster Analysis'!$I$51,
tblCluster[[#Headers],[Jan-14]:[Dec-18]],"
View 2 Replies
View Related
Oct 20, 2006
I have a list of names on my first sheet, and I want to mirror these on a second sheet, but at the start of a repeating table containing data releating to each named person. eg. I want a Name in
'Sheet 1'!A4
to display in
'Sheet 2'!A5
, and then the name in
'Sheet 1'!A5
to display in
'Sheet 2'!A32
View 3 Replies
View Related
Apr 3, 2008
If I create a Workbook in Excel 2003 with Pivot Tables when I open it in 2007 the Pivot Table are no longer there. It look like the Pivot has been converted to Data only. Are there any ways of correcting this?
View 3 Replies
View Related
Aug 21, 2006
As in attached file, I have 5 tables:
Table 1: matrix that contains Weight data in each cell
Table 2: matrix that contains Code data in each cell
Table 3: Relationship between Code and Level data
Table 4: Table with relationship between Weight data, Code data and Level data
Table 5: I want to populate each cell in Table 5 matrix from getting values from Table 4 by looking up the right value from Table 5 based on :
1) Weight data from corresponding cell in Table 1
2) Code data from corresponding cell in Table 2
3) Code and Level relationship.
for e.g. to get value for Table 5, Worksheet cell B140 ( intersection of A1-A1),
1) corresponding weight is 1.17 as in Table 1 (Weight data) (Worksheet cell B3)
2) corresponding Code is 6 as in Table 2 (Code data) (Worksheet cell B35)
3) Code 6 corresponds to Level 2 (as seen in Table 3)(Worksheet cell A74)
so, looking up the 3 values from Table 4 i.e. Level 2, Code 6, Weight 1.17, one gets cell AR98 with corresponding value. therefore, final value in Table 5, Worksheet cell B140 (intersection of A1-A1) will be equal to $4.00
I have been trying to solve this using Vlookup, Hlookup, Index/Match but am getting confused. Also, not too sure if this can be done in 1 step. New to these excel and these functions
View 2 Replies
View Related
Mar 26, 2007
I'm looking to find like values in Column A. If there are like values, I'd like to add their row's values from E to F.
I would use the =if(or( function but the amount of like values in A differs from 2-6.
View 9 Replies
View Related
Aug 15, 2008
I have a list of eastings and northings for specific incidents, then in a seperate sheet I have a list of eastings and northings for postcodes.
What I want to end up with, is which postcode the incidents are in!
So it means getting Excel to find the closest match of two values to two other values and return a corresponding value.
Here's what it looks like!
Incident Easting Northing
01 437302 113607
02 437340 113673
03 437366 113701
04 437366 113701
05 437474 113581
Postcode Easting Northing
SP410TQ 430449 91321
SP410PY 429158 91339
SP410QB 429258 91375
SP410PZ 429288 91407
SP410EA 428940 91444
I want to end up with
Incident Postcode
01 SP7185H
etc etc.
View 9 Replies
View Related
Aug 15, 2008
I have a list of eastings and northings for specific incidents, then in a seperate sheet I have a list of eastings and northings for postcodes.
What I want to end up with, is which postcode the incidents are in!
So it means getting Excel to find the closest match of two values to two other values and return a corresponding value.
Here's what it looks like!
Incident Easting Northing
01 437302 113607
02 437340 113673
03 437366 113701
04 437366 113701
05 437474 113581
Postcode Easting Northing
SP410TQ 430449 91321
SP410PY 429158 91339
SP410QB 429258 91375
SP410PZ 429288 91407
SP410EA 428940 91444
I want to end up with
Incident Postcode
01 SP7185H
etc etc.
View 9 Replies
View Related
Jun 14, 2007
To best explain my problem I will use this example
Dog 2 400
Cat 4 300
Car 1 200
Dog 7 800
Car 8 900
That data is in the top of my worksheet, and I would like to be able to find all the dog values then reference the 2nd and 3rd column and add all the dog values up and then post the totals in a area below like this
dog 9 1200
cat 4 300
car 9 1100
Stipulations
1) there are different amounts of values, there may be 1 dog value or 10 dog values, I would like the program to recognize the dog values and add the corresponding values.
2) dog, cat, car values are not the only values, there may be others like "tree, apple" but are not in use. So only values in the top of the spreadsheet get referenced to the bottom part.........................
View 3 Replies
View Related
Sep 20, 2007
i have a worksheet which i use to maintain complaints of service stations.
i need to match values in 4 columns if they are the same the fifth column should display a text.
since i log compliants, if the same complaint reoccurs again the fifth column should say return job.
View 9 Replies
View Related
Jul 1, 2013
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
View 2 Replies
View Related
Jun 27, 2014
I need creating a formula that matches the values between two separate columns with results from that matching in the third and fourth columns.
Example: Column A contains the first set of values and column B contains the second set of values. The result in column C would be all the values that are in both columns A and B and the result in column D are all the values that are not found in both columns A and B.
Column AColumn BColumn CColumn D
122123123122
123133322133
231221323221
311322231
322323311
323333333
See attached spreadsheet : match_values.xlsx
View 7 Replies
View Related
Jul 24, 2014
Using the code below I am able to copy the the data from column f to column e and match it to the row of the matching data in b. See attached workbook.
[Code] .....
I am really new to excel and am trying to figure out how to get the none matching elements in column B(where no match is found with column F) copied to column L ...
Attached File : non-matching.xlsm
View 1 Replies
View Related
