I have two workbooks, Quotes and Invoices. They have a common field (column) between them called "QuoteID". Since not all quotes turn into invoices, there are more rows in the Quotes workbook than the Invoices one. Is it possible to match the "QuoteID" cell values in Invoices to just the ones in Quotes that match up, and then merge them into a new worksheet? If not, is there an add-on that will accomplish this?
View 1 RepliesI have multiple worksheets with multiple varying columns with varying rows. My one constant is the product_id. I want to merge all worksheets into 1 worksheet based on the product_id's. Here is my example:...............
It has to consolidate all of the column names from all of the worksheets into the final worksheet, then take all of the rows and put the product_id in the product_id column and put the other data under the appropriate columns. Some columns will end up blank where they may be a column in worksheet 2 but not worksheet 1.
I have 30 xlsx files in a folder and I want the first sheet of all that files to be merged to a new workbook. The thing is I don't want the macro to copy paste the value in to the same sheet of the new master sheet like Ron's excel merge tool does. I want a macro to create new 30 sheets on the master file and copy the data from source files. And I want the newly added sheets to be renamed as the source file name. This works well except the sheet renaming thing.
Sub Merge2MultiSheets()
Dim wbDst As Workbook
Dim wbSrc As Workbook
[Code].....
I have two spreadsheets that have one set of data in each column in common.... simply put it is a number.
From the one spreadsheet, I want to pull the column that is to the right of the number in column and merge it with the other data.
I am trying to figure out a formula that will accomplish this... I have attached a file to show the two spreadsheets and my end result I would like to have.
We have a master worksheet, and I cant let staff see it, but I want them to update 'their bits' themselves, rather than email the admin staff and let them update the master sheet..
every job is on its own row and contains a unique ID.
is there a way i can merge their data in to the correct row and column(s) on the master sheet?
i've been playing with datasources etc
Excel 2010
I have a couple of spreadsheets. all of them have a same or common column called "ID".
The order of the ID columns of the spreadsheets are not in the same order however.
I'd like to see if there is a way that I can merge the spreadsheets to one using the shared ID.
To explain more:
Spreadsheet1 columns are: "ID", "URL", "Location"
Spreadsheet2 columns are: "ID", "Picture"
Spreadsheet3 columns are: "ID", "Address"
As I said copy/past is not an option as the IDs are not in the same order. I need to create a new spreadsheeet and have all "ID", "URL", "Location", "Picture", "Address" in that spreadsheet.
Is it possible to take the information below and make one list out of columns F, H and J based on the common information in column C? For example, group all the 18s in a list, followed by the 44s.this is excel 2007
column CColumn Fcolumn Hcolumn J
Option code
18180L12369301/123/54
18180L12369301/123/54
18180L12369301/123/54[code].....
I have 2 fields formatted like this:
1) Date: "30/10/2013"
2) Time: "10:56:39:000"
I need it to read/merge into: "30/10/2013 10:56:39:000" and then be able to be able to be converted intp seconds as a UTC Unix epoch example formula =(A1-25569)*86400.
I expect to deploy over 200 iterations of a workbook (templates if you will) containing a mix of up to one hundred different attributes each with its own list of valid values. My problem is the attributes don't always default to the same column in every template workbook. Therefore, to make things easier for users I would like to create attribute valid value dropdown lists on the fly using the "Valid Values' table as the source data (see the attached). Since the attribute names will be the same from one template workbook to the next, I wanted to come up with a macro that would reference a source table (a separate workbook) containing all valid values for all attributes which users would be required to download to their local machine.
See the attached example workbooks and an example of a "Valid Values" list. Here's what needs to happen: When a user opens template workbook #1 I need drop down lists containing the valid values for the attributes contained in cell B3 (User Code),C3 (Department) and D3 (Category). Likewise, when another user opens template workbook #2, I need drop down lists containing the valid values in cell B2 (Department), C3 (Group), D3 (Category), E3 (Level), F3 (Material) and G3 (User Code). Notice that "Department", "Category" and "User Code" are data elements common between both workbooks but resident in different columns.
I have an excel spreadsheet supplied by a client, let's call this the master sheet, with about 500 URLs and I've been asked to gather information from Google Analytics and place in a spreadsheet. This spreadsheet can't be changed as it goes into their CRM system.
On the master sheet, we have a list of URLS, what I need to do is go through each URL and place the number of visits to each URL on a weekly basis.
Google Analytics excel spreadsheet, will spit out a list of URLs and the page visit numbers.
My question is:
If I have both spreadsheets open, the master spreadsheet and the information from Google Analytics spreadsheet. Is there a way of having both sheets open and doing an exact match on the URLs between both spreadsheets, so we can copy and paste the information directly.
Or even a formula that says something like:
If the master sheet spread has the same URL in the Google Analytics spreadsheet, paste the relevant information into the correct cells?
As you can see, doing this manually will take a long time. I'm just looking for a productive method to save time.
I have a series of duplicate workbooks to allow for distribution to multiple users. The workbooks have a userform which allows the user to save records into a worksheet. I would like to have a standalone workbook which is a merge of all of the worksheets.
Since data will be contiuosly entered, I want the master workbook to have a "constant" link and alway but current without need to run anything.
Is it a good idea to merge xls workbooks in to one master workbook?
I have read online that some say it is ok and nothing will happen and others say it isn't a good idea because macros and formulas will not work right once merge in to one workbook.
So I have many workbooks with 2 - 4 worksheets in them. All have formulas as well as macro's and everything is working fine just as it is. But I would like to have 1 Master workbook with all workbook/worksheets combined in to 1, so that I can stop opening so many workbooks.
I have multiple files with data in that I need to merge, basically append the data from various files to an existing file. Does anyone know of a macro that can be written to do this?
View 10 Replies View RelatedI have a few hundred workbooks that I am merging into a single file. I found the following vba code that performed this task very well.
Sub simpleXlsMerger()
Dim bookList As Workbook
Dim mergeObj As Object, dirObj As Object, filesObj As Object, everyObj As Object[code]....
After I merged the data, I realized that I needed to know the source file that each row of information comes from.
How can I modify the above script to copy the filename and add it as an additional column of information when each sheet is copied into the master file?
For Example:
Currently If I have 3 files:
File 1:
1 2 3
4 5 6
File 2:
a b c
d e f
File 3:
v w x
y a b
Running what I currently have will give me:
1 2 3
4 5 6
a b c
d e f
v w x
y a b
I will have about 100 files to merge together that are in one directory. Is it possible to merge all workSHEETS named "Bob" from each workBOOK and end up with just one master file?
I found this code on this web site (no proper reference!). It doesn't work for me. Yes, I changed the directory and it still didn't work. I will have 12 columns (A:L) and differing # of rows in each "Bob" worksheet.
VB:
Sub g_CombineMultWB_AllXLSFiles() ' This Will combine all EMALL XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
[Code]....
I have 2 books right now. Each book has 2 colums of data (See attached jpg.):
Book 1 has a column for "phone number" and another for "street"
Book 2 has a column for "phone number" and another for "house number"
I would like to merge these books together so that all the information I have about these contacts is in the same book. Column A will be the phone numbers, column B will be the street name, and column C will be the house number. As you can see by looking at book 2, I only have house numbers for some of the phone numbers in book 1. My goal here is to have book 2 "look at" book 1, and add any information book 1 does not have (such as house number) to the relevant row (the row where the phone numbers match). This new book will by my book 3. I've attached a jpg. with how book 1 looks, book 2 looks, and how I want book 3 to look.
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.
I used the formula below in a calculated field and it does not match the values using the added column to the data file.
=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)
I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.
Trying to manipulate a macro I recorded to be slightly more dynamic with some VBA code. The macro has saved me a lot of time however each month I have to re-do it due to the date changing and I'm sure there must be an easy way to adapt the below code.
Current Code (it repeats afterwards as there are lots and lots of sheets I need to perform the action on).
Windows("Raw Data.xls").Activate
ActiveWindow.DisplayWorkbookTabs = True
Sheets("Calls").Select
Range("C43").Select
Selection.Copy
Windows("Volume Tracking.xlsm").Activate
Sheets("Offline").Select
Range("AE33").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
What I'm after is a way to alter the range highlighted based upon matching a cell in "Raw Data.xls' and a cell in "Volume Tracking.xlsm".
The cell A43 in "Raw Data.xls" contains a month (which changes every month); if the month is Jan then I would want the Range to remain as AE33. If it's Feb then I would want the Range to be AF33 (and so on).
In "Volume Tracking.xlsm" I have the months in cells AE4 (Jan), AE5 (Feb) etc.
Is there a way to locate the column in "Volume Tracking.xlsm" on row 4 that contains the value found in A43 in "Raw Data.xls" and then paste what was copied out of "Raw Data.xls" C43 and paste it in to row 33 of the correct column that holds the matching month?
If not could I add code to say if cell A43 in "Raw Data.xls" = Jan then paste to AE33, if Feb then paste to AF33 and so on.........
Excel 2007
I have a workbook that has a sheet called CustInvData, this sheet contains 4,421 rows of invoice transaction data for 178 customers starting on row 2 (headers on row 1). I need to split the transaction data for each customer out into a workbook template based on the customer name in column A. I need each workbook named by the customer name along with a month and year (example: Bellsouth-0911.xls), this should create 178 unique workbooks. And since we sometimes have to go back and rerun invoices for previous months, I'll need to control the month and year manually in the code.
The parsed data needs to be copied to a pre-formatted invoice template. This template has 2 sheets, Sheet1 is called 'Product Summary', this is a table that uses VLOOKUP functions to read the data in Sheet2 called 'Product Details', this is the sheet the parsed data needs to be copied to for each customer invoice. The 'Product Details' sheet has formatted rows 1 thru 11, row 11 being the header row for the data from CustInvData to be copied. So the parsed data needs to start at row 12.
Last, once the data has been copied into the 'Product Details' sheet, I need the data to be SubTotaled at each change in column J (Product) and use the 'Sum' function to add a Subtotal in column L (Retail Price) for each unique product category.
Example data below, I've simplified it (the actual data array spans from columns A to Y)
Customer NameProduct Retail Price
ABC CompanyAVMPCR10
ABC CompanyAVMPCA15
[Code]....
I'm a bit of a novice with macros, but I know Excel pretty well.
Using Excel 2007 running on Windows Vista
Using EXcel 2013, Windows 8
I have an Excel worksheet with one column being e-mail addresses. Other columns are Christian names, etc
Ideally can I create a full Mail merge with Outlook using whatever data I want. But probably just e-mail address and Christian name?
Otherwise be able to send one e-mail to all the e-mail addresses, without a major re-type.
I have searched and there are some examples that are similar to what I'm looking for but I cannot seem to use those answers to make my problem work. The example from the forums that seems to match my problem the closest is [URL]....
Summary: I have an Excel file called "COST TEMPLATE.XLSX" that has product information (serial number, quantities, pricing), calculations and reports; then on a monthly basis I receive a file (VENDOR_EXPORT.CSV) with updated product quantities to be merged into the cost spreadsheet.
I would like to merge specific data fields from the VENDOR_EXPORT.CSV file into my cost template based on the serial number. I am attaching three dummy files that hopefully describes the issue:
1. COST TEMPLATE.XLSX
2. VENDOR_EXPORT.XLSX - which highlights the cells to be import and to which corresponding column
3. VENDOR_EXPORT.CSV - raw CSV file
My preference is to do this with functions, not macros. How to add the export into the existing workbook as a temporary worksheet, or just pull from the other workbook as CSV file.
I'm using excel 2008 for mac. I've got a spreadsheet with around 4000 rows. The data is organized like this:
|___________URL_________|______EMAIL______|
|Example Domain
|Example Domain
|Example Domain
|Example Domain
|Example Domain
What I'm trying to do is concatenate all of the URLs into one cell so that each email address has only 1 single row with many URLs associated with it. I tried using VLOOKUP(B1, $A$1:$B$4000, 1, FALSE) but this didn't work. I thought it was a long shot anyway. I also tried writing a bash script do parse a csv with this data and create a csv file with the URLs concatenated with no luck. I'm trying to get my data to look like this:
|___________URL_________|______EMAIL______|
|Example Domain
|Example Domain
|Example Domain
|Example Domain
|Example Domain
Where these are 2 adjacent cells.
EDIT: The format didn't turn out like I'd hoped. In the first example, each URL has an associated email address, each in its own row. In the second, it is just one row, with multiple urls in the first cell and an email address in the second cell.
I have two worksheets. One has columns A B C , the second has columns A B C D. Columns A in the two worksheets reflect the same data (serial number) , although one worksheet could have more rows than the other since it gets updated manually daily. I would like to use a macro that would:
1. use columns A's value in worksheet 1 to match a row in worksheet 2 then merge columns from worksheet 1 & 2 and insert into a new worksheet
2. repreat until all rows in worksheet 1 are read
3. save worksheet 3
I have a workbook with several sheets containing prices of products. One column has the product number and a second column has the price. We just received new prices. Can a macro read the product number from the new sheet, find the same product number on the old workbook and transfer the new price. and than change the price so I know it was updated.
View 2 Replies View RelatedFind the most common occurring string in my spreadsheet based on a lookup value. For example, if my table is as follows:
Capture.PNG
- I want to calculate the most common value chosen by user 234 (A in this case), user 524 (B in this case)... and so on.
- I want to calculate the percent of the chosen value. So in the previous point, A was chosen ~67% of the time by user 234... and so on.
I'm not sure which formula to use. I am able to find the most common occurring value in column B using the formula below (which I found here), but how can I do that for a specific value, a user ID in this case?
I would like to sync cells together that contain common words for sorting purposes is this possible? For instance i have a [URL] ..... in column A row 1 and In column B row 2 i have the word bellmont i need to get the rows to sync so rows containing common words line up. I have 8,000 rows to sync?
View 1 Replies View Relatedi want to compare two excel sheets and extract common data in either sheet. For eg: If sheet 1 and sheet 2 contains some common data, i need to compare or lookup or whatever i do but i need to pull out that common data in sheet 2.
View 3 Replies View RelatedI have an Excel file in which I want to find the numbers which are repeated in several columns (B to L), but there are too many rows to find them looking one by one cell, is there a function which will allow me to find the common values which appear in these columns?
eg.:
A B C
1 3 4
2 1 7
2 4 7
4 1 1
results: 1 & 4