I have a spreadsheet with only 80 rows in it and I need data from another spreadsheet with over 200 rows. One of these rows in each spreadsheet contains a matching field (Job #). I only want the 80 matching rows data from the over 200 row sheet.
Is there an easy way to combine these two. Even adding the 80 to the 200+ will be fine as I can just remove the blanks. I can't figure out a way to combine them and match them up.
I need to merge rows with duplicate values in column A (Patient Name being the most important one), with columns B, C, & D usually having different isolated values as well. Columns E, F, G, H, & I are date columns, but the data is always going to be the number 1, meaning a patient was seen once that day (if they were seen two times that day for different reasons, information would be in an unmerged second row [same patient name listed in two separate rows], where columns B & C would be different). Column J is an autosum of columns E through I if that makes a difference. Column K is a notes column. The data that needs to be merged is always added to the bottom of the spreadsheet in order to show that a patient was seen on any given day, with columns B through K almost always being blank. Example:
Column A---------Column B---Col C----Col D--Col E--Col F--Col G--Col H--Col I--Col J---------Col K
Patient Name-----Therapist---Shared--%P----2/3----2/4----2/5-----2/6----2/7---Total Visits--Notes
Alice Alpha--------AB----------PT-------1---------------------------------------------0-------------blah
Boris Beta---------BC----------SELF----2----------------------------------------------0------------blahblah
Carl Carlisle-------CD---------PTA------3----------------------------------------------0
Carl Carlisle-------AB---------SELF-----2----------------------------------------------0
Donny Delta-------DE---------PT--------1---------------------------------------------0
Ernie Elephant-----EF---------PTA-------2---------------------------------------------0
Alice Alpha-----------------------------------------------1
Carl Carlisle--------------------------------------1--------------1---------------1
Ernie Elephant-------------------------------------------1---------------1
This is what I'm hoping it can look like:
Column A---------Column B---Col C----Col D--Col E--Col F--Col G--Col H--Col I--Col J---------Col K
Patient Name-----Therapist---Shared--%P----2/3----2/4----2/5-----2/6----2/7---Total Visits--Notes
Alice Alpha--------AB----------PT-------1---------------1-----------------------------1-------------blah
Boris Beta---------BC----------SELF----2----------------------------------------------0------------blahblah
Carl Carlisle-------CD---------PTA------3-------1--------------1---------------1------3
Carl Carlisle-------AB---------SELF-----2----------------------------------------------0
Donny Delta-------DE---------PT--------1---------------------------------------------0
Ernie Elephant-----EF---------PTA-------2--------------1---------------1-------------2
In this example Carl Carlisle is being seen for two different things, however how would it be written so the macro would know which Carl Carlisle row to merge with? I'm thinking that before running the macro I could manually enter the information into column B so it knows which Carl Carlisle row above to merge with.
Data always starts at row 14 (row 13 is frozen pane header column), and extends to a row that is different every week depending on how many people happen to be in the list.
I found something from this link that looks very similar to what I need, but with no knowledge of coding, I have no idea how it should be tweaked: Merge Duplicate Rows Keeping Data In Same Columns
I know I'm asking a lot, but the amount of time this takes to manually go through hundreds of rows of patient names every week is incredibly time consuming, and I have too many other things to stay on top of at work for this to drag me down day in and day out.
I have an excel spreadsheet with approximately 10000 rows. There are approximately 10 columns...
Column A - person's ID number
Column B - name
Column C - Street Address
Column D - City
Column E - State
etc...
It being such a large list there are many many duplicates (it was pulled from a bunch of different excel spreadsheets and combined into one via copy and pasting one document into the other).
I figured out a way to have excel highlight the duplicates in a different color... but scrolling through 10k people and deleting the duplicates is obviously very tedious (approx 40% of the spreadsheet is duplicates).
Is there a way to sort out the duplicates (via their ID number, column A) so that there are no repeats? I want to get rid of the 2nd/3rd/4th (etc) occurance of the person's information but I was to obviously keep the first occurance.
I tried using Advanced Filter but I must have done something wrong because it shrunk the list too far down.
I need the macro for deleting duplicate rows only it should keep one lowest value row.
for e.g.
Column A Column B
TS1234 100
TS1234 50
TS1234 200
Macro will compair dublicates in column A & it will keep lowest value row (i.e. 50 value in Column B), other dublicate rows will be deleted.
I have a list that contains multiple data that I would like to merge in to one. There are varying duplicates.
Currently it looks similar to this:
Repid, Lname, Fname, States
000001, Doe John, CT
000001, Doe John, NY
000001, Doe John, GA
000050, Jones Mary, NJ
000050, Jones Mary, NY
000025, Presley Elvis, PA
000025, Presley Elvis, NY
000100, Doe Jane, NJ
I want to return the following:
Lname, Fname, Repid, States
000001, Doe, John, CT, NY, GA, NJ, CA, MA
000050, Jones, Mary, NJ, NY
000025, Presley, Elvis, PA, NY, GA, NJ
000100, Doe, Jane, NJ
After sorting and filtering rows with in a set range I will have several rows that are almost duplicates. This is normal and expected due to how the workbook is used. Among these rows also will be several single rows that are not duplicates. It is important that I combine any two duplicates into one row. Example:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS101300PS9
2 NameA0XX15930777PS91200PS10
3 NameX1159XXP555FBX1545PS9
4 NameB0A1234P123PS101263PS9
5 NameB1A1234P123PS90512PS10
What I need is this end result:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS91200PS10PS101300PS9
2 NameX1159XXP555FBX1545PS9
3 NameB1A1234P123PS90512PS10PS101263PS9
Its important that the data in each column stay with in that same column. Also of course it needs to be on the same row with the same person (NameA and NameB). The Columns that would determine if its a duplicate are D and E . I would need this to be preformed via macro or some easy way so that others will not have a hard time. It will be on a protected Shared Workbook with Excel 2003. I've enclosed a Sample. How can I sort these or accomplish this and maintain the data where it needs to be?
I have attached a before and after image of what I am looking to accomplish.
In the before image, you can see that there are 3 rows of data
- a header
- a repeating model number (in column F) with accompanying data (values in columns G - J are the items of interest)
In the after image, you can see that I took the 3 rows of data and turned it into simply two rows of data
- a header
- the repeating model number
What I did however in the after image, as can be seen, is I took certain data values that appeared on the repeating row (columns G - J), and included them as PRICE, COST, BEGIN, and END values in new columns on row 2.
Is there a way to accomplish this via some functions or maybe even a VBA script?
I have an excel file which has many rows that are almost duplicate but some columns would differ, I would like to merge them, I will try to explain what I mean by "merge" .
Code :
Sub Remove_Duplicate()
Dim LASTROW As Long Dim I As Long Dim J As Long Dim K As Long Dim MyVALUE As Variant
[Code]....
Since I am very new to this language and my tinkering doesn't work at all. Whether or not a row is "almost duplicate" is based on columns A to G.
There is one crucial feature to the 2007 Excel that has been overlooked.
Throughout all versions of Excel there has always been the feature of
converting text to table, however there is no way to do this in reverse.
There is no way to merge two columns of data and to keep all of the data
without one column overwriting the other. If only there were an automatic
way to merge two columns of data and to be able to place a delimited
character in-between, just like the “Convert Text to Columns Wizard”, except
in reverse. Currently, the only way to merge two columns of data is to
manually go row-by-row and cut and paste them together. However, for 500,000
rows of data… this is impossible. Or to use a function to merge two columns,
however this requires that the original two columns remain. This is also
unacceptable. If Microsoft really wants to make Excel more functional, how
can this vast improvement be overlooked?
What I am trying to do is take the data (all columns) in Spreadsheet 2 and put that data in Spreadsheet 1 with all the companies matching up, how do I do this, is this possible?
I tried using VLOOKUP but I don't know if I was doing it right and I don't even know if it's the right function to use.
In sheet 1, column A I have a list of about 30,000 companies
In sheet 2, column A I have a list of about 10,000 (pulled from sheet 1), I have other info associated with these companies in columns B and C.
Basically I want to take column A, B and C from sheet 2 and match them up with the same companies in sheet 1. So there will be 10,000 matches and 20,000 N/A's. This is how I set up the VLOOKUP but nothing happened.
I have a template and several spreadsheets based on this template, and when changes are made to the template they need to be manually merged into each spreadsheet, a very painstaking, time consuming, and error prone process. Changes are mostly added rows, data tables, and macro (coding) changes. Surely there must be a better way of doing this. There must be some way of automating at least part of this process, or so I would think. I know that changes to a workbook can be tracked, but I don't shows changes to code, and I don't know if it is true for templates as well (but I suspect that it is); at least this would show me what changes to the template had been made, but maybe not changes to the code, but this is only a small part of the problem.
View 1 Replies View RelatedI have two spreadsheets of part numbers, one with a full list of parts approx 3500 lines and another with the same part numbers (but only approx 1000 lines) but this file also contains sales history. columns shown below
PART NUMBER, PART DESCRIPTION, RETAIL, COST, UNIT OF ISSUE, CURRENT STOCK, YTD SALES, MTD SALES
What i want to do is merge the two files together so the 1000 parts i have sales history for correspond with the same 3500 lines on the other master spreadsheet, so i can then sort them in which ever order i need at the time.
I have three large txt files. All three are the same number of columns but are of a different number of rows. (Each month the number of columns will increase but the 3 source files will still contain an equal number).
Therefore I need to open the first text file, select all data and paste it into my master file.
I then want to open the second txt file and paste all the data at the first empty row of my master file.
I will then open the third txt file and paste all the data at the first empty row of the master file.
Finally I will close the txt files.
I will then have several other amendments to make to the master data file.
So to my problem....
Opening the txt files is fine.
However I want to select all the data in the first txt file but excel gives me an error message. (On the line highlighted in my code). I remember there being a function in VBA that selects all data around a cell, can anyone remember how to do this?
My code so far is:
Workbooks.OpenText Filename:= _
"C:CUSTOMERPass 1.txt" _
, Origin:=xlWindows, StartRow:=1, DataType:=xlDelimited, TextQualifier _
:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=True, Semicolon:= _
False, Comma:=False, Space:=False, Other:=False, FieldInfo:= Array(Array _
(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, 1), Array(6, 1), Array(7, 1), Array(8 _
, 1), Array(9, 1))
Cells.Select
Selection.Copy
ActiveWindow.WindowState = xlMinimized
Sheets("Data").Select
ActiveSheet.Paste
I have a spreadsheet with names and phone numbers. I have another spreadsheet with similar- but not the same names and not in the same order- with email addresses.
I have pasted all info into one spreadsheet and alphabetised it- it looks a little like this now.... (joe bloggs being an example name)
joe bloggs telephone no
joe bloggs email
Is there a way i can easily merge these two rows keeping the name the same? Otherwise it will take FOREVER!!
I have two years of sales data for same and different product codes in different sheets for each year.
I want to merge both the sheets so that i have a consolidated view of both years data in one sheet.
The sheets have columns that look like the one described as under:
Product code Month 1 m2 m3 m4 m5 m6 m7 m9 m10 m11 m12
I have two Spreadsheets on Excel 2003, one provided by a service supplier (i), and one from my own system (ii).
I need a macro attached to spreadsheet ii that looks for data matches between the F column of my spreadsheet, and the C column of the suppliers. Where data matches (i.e. if cell C42 in spreadsheet ii is the same as cell F23 in spreadsheet i) it transfers the contents of the A column of spreadhseet i and places it in the corresponding cell in the C column of spreadsheet ii.
Example 1 : In spreadsheet i cell C20=BN213YD. In spreadhseet ii cell F55=BN213YD. Therefore, the macro takes the contents of cell A20 in spreadsheet i and places it in cell C55 of spreadheet ii
Example 2 : In spreadsheet i Cell C75 = TN142XS. In spreadsheet ii this data is not found. The macro therefore takes no further action.
Basically, the suppliers spreadsheet has less information per row, but more entries overall. My spreadsheet is lacking a lot of suppliers references, but has more comprehensive information elsewhere. Until now i have been doing a manual search of the postcodes between the spreadsheets and rectifying them manually, but this is taking longer and longer as the spreadsheets grow.
I need to sort my data by the oldest date first in colum L (NEED_DATE), but I need to keep the rows grouped by colum A (Material No). See example of data.
Material No
Tool No
Prodn Ordr No
Curr Oper No
Curr Workcenter Cd
Next Oper No
Next Workcenter Cd
[code]....
how would i run a macro to merge duplicate cells in a column
For example, i have lots of data in columns A, B and C
however some of the data in columns A and B is the same. Column C data never changes. so to make it easier to read, i would like to merge these cells (which are the same) together?
-ColumnA-
Cat
Cat
Cat
Dog
Dog
Dog
Dog
Mouse
Mouse
Mouse
Mouse
Mouse
would become.... (with all the other data the same)
-ColumnA-
Cat
Dog
Mouse
I dont want to lose any of the rows, as the data in column C is always different. I just want to merge the similar ones, so its easier to read.
Its a bit like this, but i cant even come close to getting this to work:
[url]
I'm trying to get data totals for multiple entries and haven't been able to figure out how to do this using a pivot table.
For example:
A B
Ben 2
Bill 1
Jane 3
Bill 4
Dave 7
Jane 4
Would make it
Ben 2
Bill 5
Jane 7
etc.
this list is 3700 cells long.
Is there an easy macro or another way of doing this? I want to generate a list that gives all data totals but just lists each persons name once. I treid attaching the file but it wont let me! here is the link... [URL]
What I have is a massive table of data (15k+ entries), which consists of 4 different tables merged together. I have a lot of duplicate entries. However, most of these entries have information in one or another columns that its duplicate does not.
What I need to do is:
Identify the duplicate entries (by part number, which is one of the columns).
Merge the duplicate entries. In the merging process, I need to carry information over, taking data that is currently in 2 or more rows and merging it into one row.
Here's an example:
column1 column2 column3 column4
row1 a . . d
row2 . b
row3 . . c
needs to turn into:
column1 column2 column3 column4
row1 a b c d
If I'm not explaining this well, I will do my best to clarify. My main question is, is there any way to automate this process (even partially)
I have data in excel that has some information the same with a unique field. See below:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
[code]...
I want it to consolidate all of the like information but add on the codes in separate columns like this:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
Code 2
Code 3
Code 4
[code]...
Also, sometimes the same code is used multiple times but i want any duplicate codes to show as separate codes.
I have a game where people are scored on the spreadsheet, but they can join anytime, so everyday, I get a combined list of points. The list consists of people who joined previously, and the new players. How should I combine the points?
[URL] ..........
I have dumped main frame data into excel. It is customer info that is in three rows of data each. I need to know if its possible to group or somehow keep three rows of data together for multiple sorts. The first row is the customer name, the second row is their first line of address, the third row is the city, state and zip. I need to add columns to this dumped data, but I will need to do a number of sorts for different views of the data. But as I've stated every 3 rows go together. I've tried different ways to group (for lack of a better word) the three rows, but nothing I've tried works. I've also done multiple searches, but either I'm not searching on the right word or this can't be done.
View 9 Replies View RelatedI have a spreadsheet that I want to keep the blank rows that seperate the data for asthetic reasons. Can I sort just the rows with data in them and still keep the blank rows where they are?
View 9 Replies View RelatedI'm trying to sort by City first, then by Report #, but keeping the highlighted rows together. If I use the custom sort it will through my D2's at the bottom and not keep them with their city, report, and D1. How do I get them to stay together? I have attached my document example.
View 4 Replies View RelatedI have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I have a spreadsheet with a lot of financial information going down a column (about 500 rows down). Most of the cells are just typed in, but certain rows have sum formulas in them. Is it possible to copy values from another workbook, paste the values in, but somehow keep the formulas that are running through?
View 1 Replies View RelatedI have an excel file with over 20 worksheets and each of them have around 1200 rows. The first column in each worksheet contains the variable names and then the data associated to it is present horizontally.
I only want to keep around 80 rows from those 1200 rows. They are not in sequence (means they are not in continuous order) so I manually selected those rows by deleting the non required rows step by step.
I did it manually on 2 worksheets but I don't want to do that manually over 20 worksheets. Is there any method that can speedup the whole process.
I am attaching the snapshots of the worksheets..
This one is before I deleted the unwanted rows.
This one is after the deletion of unwanted rows.
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....