I am parsing a cell that contains the date and time; "2013-05-20 13:20:39" and it reads this way in the active cell. In the formula bar it reads; "2013-05-20 1:20:39 PM" and looks that same way when I use text to columns. What do I do to keep the time in military time (i.e. the way it appears in the cell) when I parse the cell contents?
View 5 RepliesI have 4 distinct columns.
Adm Date Adm Time Trans Date Trans Time
1/16/2014 937 1/16/2014 1045
1/1/2014 121 1/1/2014 121
1/14/2014 800 1/11/2014 735
1/30/2014 100 1/30/2014 205
1/13/2014 800 1/12/2014 1202
I would like to calculate the difference (# hours spanned from the dates shown). Unfortunately when we transfer the data the COLON is dropped from MILITARY TIME so I am having problems in the calculation. This is also made more difficult as some of the calculates span over two dates.
I need a simple formula to convert standard time (1:05pm) into military time (13:08).
I've read through several posts, but all I've found is reformatting or time subtraction type information. The reformating works to an extent, it gives me the hours in military but the minutes stay standard.
Basicly, all I need is:
Cell A1 = 1:05 p
Cell B1 = formula that shows/converts 1:05 p as 13:08
I have a column of numbers formatted as general. The data represents military time. When I try to change the format to time, the output is 0:00. How do I convert the existing data to time data IN THE SAME cell the existing data is already in? Is this possible? I have 26,000 lines of data I have to apply this to.
View 9 Replies View RelatedI have four columns. In the first one I want to keep my START time (in format of military time), in the second column I have STOP time, in the THIRD column I have TIME USED in other words it is a DIFFERENCE between STOP and START and I used this formula for that: =B2-A2 and it works.
Now in the FOURTH column I wish to have the TOTAL TIME added from the THIRD column and this where the problems starts. I used this formula =SUM(C2:C500) and doesn't work correctly.
Let's say I have the following data: ....
Looking for a formula that will convert military time into hours and total the hours in each row going accross up to 31 days. Only problem is the word 'OFF' is included on various days in each row.
View 9 Replies View RelatedI'm trying to calcuate the time difference using military time.
For example:
A1 has 0400 A2 has 0430 A3 SHOULD be :30
B1 has 1500 B2 has 1715 B3 SHOULD be 2:15
Unfortunately I either keep getting all zero's, or the correct answer but without the ":" in the answer (b3 would look like 215)
How I could convert military time to standard time? The format is HourMinuteSeconds.
For example, in column C, I have something like
92412 ---> So this is 9:24:12 AM
152209 ---> So this is 3:22:09 PM
I just want to change the format from military time to standard time so that I can do a sort.
I have written a formula to convert military time to 12-hour format.
View 3 Replies View RelatedIn A1, I've got a time for an event expressed in military time without colons, like 1130.
In B1, I've got two more times expressed the same way, like 1230-1300. These are the time the event was actually began and ended.
I've separated these two times into four different columns, the first two (C1 and D1) containing the raw numbers 1230 and 1330, and the second two (E1 and F1) containing those numbers formatted as times (12:30 and 13:00) via the TEXT function =TEXT(C1,"00:00")
Getting the difference between these two times (expressed in minutes) is not difficult. What is proving to be difficult (however simple it seems) is checking to see if C1 (time event began) is within an hour of A1 (time event was scheduled.) I was able to get this to work with times not involving 0000 or having, say, 0130 as an event time and 2300 as the time the event was started, but those two cases (switching 0000 to 2400, and moving between "days") is causing a hangup. Checking if A1
B. start time C. end time D. Total time (military time)
Example: 2300 - 0300 = 4 hrs worked.
=IF(C19-B19>0,C19-B19,1+C19-B19)
I have a row for every date the hors is worked.
I cant seem to get the total hours to calculate correctly at the bottom of column D for a total hours worked in a particular pay period. It calculates a total up to 24hrs then reverts to zero. I have tried [h]:mm =SUM(XX:XX) and just about everything else I can think of and cant get it to calculate a correct total over 24 hrs.
if someone called me at 4:55pm and ended the call at 5:10pm, the whole call lasted 15 minutes. So, I want to show on excel that the call lasted 5 minutes in the 16th hour of the day (4:55pm) and 10 minutes in the 17th hour of the day (5:10pm), for a total of 15 minutes.
View 3 Replies View RelatedI am trying to find a way to have excel recognize text data input as date/time.
[Code] .....
Where 02 Is the Date, 2020 is the time (military) Z is Zulu/GMT, MAR is Month and 14 is Year. I believe excel recognizes
[Code] .....
But I have a spreadsheet (on a confidential system) with thousands of entries that I need to convert. Also, the people I have working for me are not remotely. I reject the idea of entering data that way.
I am also trying to keep the display the same format: ddhhmm"Z" MMM yy
I have a column that is a list of addresses. For example:
I need a formula to separate out the last words (city and state) from the rest of the address and put into a different cell.
I want to parse a cell if a date is present for example I have 03/26/1985 AL in one cell and want to parse to two different cells however in between those cells I have other cells with different data that I dont want to parse. Basically I need to parse the cells only if a date is present.
View 7 Replies View RelatedVBA code (or formulas) that can parse data from individual cells into multiple columns? I have attached a file noting the current inputs in columns A-F and the desired outputs in columns I-O. Additionally, I have noted the distinguishing criteria for each of the fields in cells I13-O13. Also, I noticed that each of the data points in the input cells are separated by at least two spaces. Lastly, the input data in the working sheet goes from columns A-H and the desired outputs would start from column I; with row 1 having the headers.
View 13 Replies View RelatedI need to prepare a lot of data for upload from Excel to a system. Example, In cell A1: I have very long text that I need to parse into B1, C1, D1, etc, depending on the length as each cells can support up to 40 characters only.
It seems easy as I can just find the length of A1 and use mid to parse them to the rest of the cells. But the sales person wants the data to be readable, meaning that I can't just split the data simply based on the character limits.
"Use a formula to fill in column F (brand name) in the data worksheet. The Brand Name is the Branded Description minus the last word.
NOTE extra mark: If your formula cant find a space (is error = true) then it takes whatever is in the cell and uses that."
Would I be using the CONCANATE formula or something similar?
I have attached a workbook stating my problem.
file1.xlsx
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View Relatedi am using this formula with military ranks as the primary value to look up. i know i am doing it correctly because it works with looking up values in another excel workbook when the rank is CPT, PFC, PV2, SPC, SGT, SSG, etc... but it does not work for any rank that is abbreviated with a number as the first character, such as 1LT, 2LT, or 1SG. instead i get a #N/A, which is false. i have looked all over the internet to include this website but cannot find an answer.
View 9 Replies View RelatedI have a cell that is formatted to the military date system
051125Z Mar 10 (ddhhmmmZ mmmyy) Cell D24
What I need is in Cell D25 to add 30 minutes to this date.
I work for a freight company and have been trying to create a macro for a spreadsheet that I have to create every single day. I pull a report from a program called the AS400 and it sends me an excel spreadsheet with information about certain shipments such as close time and arrive time (which are in military time such as 16:00) along with driver names.
Anyways what I need to accomplish is to highlight the entire rows font in red if the driver arrived an hour or more past there close time. When I get the spreadsheet the military times are not showing in the HH:MM format under format cells. So I select the HH:MM format and try to do a formula such as Arrive time cell (M1) - close time cell (L1) to get the time difference it shows as #VALUE!. I've tried to convert it to different time formats and nothing works. The values just stay the same and will not allow me to do calculations with them.
At first I thought this was because the program was sending those values as text. I tried to use the date>text to columns>finish button on the columns but did not work. I've tried to remove the":" then use the HH:MM cell format but still wont work. I've even tried a time value formula to try to convert the values such as =TIMEVALUE(LEFT(A1,2)&”:”&RIGHT(A1,2)).
But nothing works it will not allow me to add or subtract from the time values no matter what I do. I am running excel 2010 on Windows XP the english version.
If I have a cell that has the following information: DEF(352) HHY(24533) KLDD(3334)
And I extract that to a String with the following
I have about 10,000 records which I need to split up into different fields, they are in the format prescribed below:
1 George Avenue
20-25 Alphingoton Close
Manors House
I want the above to be in this format:
Collumn 1 Collumn 2
1 George Avenue
20-25 Alphington Close
Manors House
Raw data:
1 acct01 John Doe 10
2 acct01 Hits 20
2 acct01 Runs 05
Goal:
1 acct01 John Doe 10 20 05
Searched answers but found nothing that helped. The following code results in the error - 1004 Reference is not valid. First cell is not empty and not the same as select.
' Sorting
oExcel.Columns("A:G").Select
On Error Resume Next
oExcel.Selection.Sort oExcel.Range("C2"), xlAscending, , , , xlSortNormal, xlSortNormal
If Err.Number > 0 Then
WScript.Echo "An Error Occured: " & Err.Number & " " & Err.Description
Err.Clear
End If
oExcel.Range("A2").Select
I work in the Oil and Gas industry and deal with large data tables that have "Location Codes" for lack of a better term.
The problem is that not all Databases use exactly the same format of code, they will however always have the following:
xx-xx-xx-xx ---> ie. a string of four numbers each seperated by a Dash.
This string sometimes will appear after a text name of varying length. With this in mind I would like to parse the four numbers into four different columns.
Things I've tried with some success:
Using the "Right" function to break off the location code off the end of the entire name, and then using the ".parse" command in VB to seperate the numbers at given intervals.
This is great for certain purposes however because the four numbers are not always 2 digits, and the ".parse" command cuts at given intervals it is hard to accurately parse an entire set of data.
Some examples of location Codes are given below:
9-23-78-11
WEST DOE 11-16-81-15
KNOPCIK 3-9-73-9
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies View RelatedTrying to Parse text in Excel - Since there is no definitive length and no standard in the way the name is created , I am having tough time to use the Software reports.
A column is from software report,
I am looking for any option to arrive at values as appearing in F column.
I did B and C column but not sure is there any other efficient way of doing the same or any other formula to arrive at F - Desired Result.