I need a formula that will provide monthly and quaterly averages from another worksheet, but only include the months that have occurred. I have the formula to obtain both the averages and quarter totals, but it is counting all months w/in the quarterly range before the months have occurred.
View 5 Repliesgenerating a formula that takes the weekly values in a quarter and uses them to generate a quarterly average. Quarters are split up as follows.
Q#1: 09-11 (First week of September-last week of November)
(Used to generate price for January)
Q#2: 12-02 (First week-Last week)
Q#3: 03-05 (First week-Last week)
Q#4: 06-08 (First week-Last week)
I've attached an excel sheet with some dummy data.
I have a sheet with daily data starting from 01/01/2000. I want to calculate daily averages for each quarter (i.e 2000Q1 value will be the average of values between 01/01/2000-31/03/2000, 2000Q2 will be average of values between 01/04/2000-31/06/2000, 2000Q3 average(01/07/2000-31/09/2000) and 2000Q4 will be the average of (01/10/2000-31/12/2000) etc. for all years afterwards.
I want to have the values in the corresponding cells starting with range ("e2")
I am trying to convert quarterly data to monthly
The quarterly data columns go: Mar-14, Jun-14 etc
The monthly data columns goes Jan-14, Feb-14 etc
I am trying to use a vlookup and match formula but as you will see in the attached file it is only working for those months that are labelled in both data e.g. March 14, June 14
Is there a formula that will pick up for example that January and February numbers should be drawn from the March 14 quarter, April and May from June quarter etc?
I am building a Discounted Cash Flow.
I have monthly cash flows rolling for 10 years, which I need to sum up into quarterly cash flows.
I am currently trying to manipulate date ranges for monthly and quarterly reports, and am having trouble doing this. I have attached a file with an example of what I would essentially need.
I would need the "Nbr of Projects", "Nbr of Days worked", "Nbr of International Projects" and "Nbr of Local Projects" cells filled in under each respective report, based on the data in the top left.
If a project falls in two months, such as "18.12.2008 to 15.01.2009", this would be treated as 1 project for December and 1 project for January. Also, I would need only "NETWORKDAYS" included in the solution, so 11 days in this example.
I am trying to create a document that takes our client PO amounts, tactics/spend line items, and dates from one sheet and averages them across the months that it is eligible, so we can know the total amount of money we can expect to go out from our clients each month.
For example:
Client1 Tactic1 StartDate EndDate TotalAmount
Client1 Tactic2 StartDate EndDate TotalAmount
Client1 Tactic3 StartDate EndDate TotalAmount
Client2 Tactic1 StartDate EndDate TotalAmount
Client2 Tactic2 StartDate EndDate TotalAmount
I have mostly figured this out in a really complicated way with many nested if statements, but there HAS to be a simpler way. There will be lots of hands in this document, so I would like to make it as simple and easy as possible.
I have a data series running horizontally, which gives me monthly values e.g.
Jan 10 - Feb 12 - Mar 11 etc. Imagine the months are in row 2 beginning from column 2, and the values are in column 3.
I would like a formula which adds the three values, and in row 6 column two gives me the total for the quarter (10 + 12 + 11) and displays 33.
The next quarter value, I would like in row 6 column 3, etc.
I was wondering if there is an easy way to convert a cashflow present quarterly into a cashflow presented monthly? I would like to divide the quarterly figure by 3 and insert each third into one month on the monthly cashflow.
In Cell H2 I have 01-Apr-12 and in cell H870 I have 30,000. I would like this to go into cells H900, H901 and H902 as 10,000 in each. This process could then be copied along.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
I have a fairly large set of data on one sheet containing numbers for 60 different people. The data is set up similarly to the set below:
John Smith 75
John Smith 80
John Smith 62
Jane Doe 49
Jane Doe 89
Jane Doe 66
So on and so forth until the 60th person. My question is: Is there a way to average the numbers for each different person at one time? What about median and mode as well? Do I need to set up a different sheet for that?
I have a bunch of workbooks in a folder and I'm basically trying to take the average of the same specific range for each file. I have somewhat of a method for doing this where I separate it into several steps and grab bits of code for each step (there's descriptions on the code). How I can improve or streamline it?
Code:
'STEP 1
'run this first to combine multiple files/workbooks into one file
'Change MyPath to the folder location
Sub Merge2MultiSheets()
[Code]....
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
there is probably is shorter code too
Dim sLastMonth As String
Dim sNextMonth As String
Dim iNextMonth As Integer
sLastMonth = Worksheets(Worksheets.Count).Name
iNextMonth = Month("1 " & sLastMonth) + 1 ' Need any valid day of month
sNextMonth = Format(DateSerial(2000, iNextMonth, 1), "mmm") ' Use any valid year & day
I have a daily nutrition log that is made up of monthly sheets. New entries are placed below the last entry, into the proper sheet by date, automatically.
The problem I am having is to find a way to put my formulas and formats into row 1 of each new monthly sheet so that when the entry is for the next month, it will add the new entry into row 2 of the new month, seemlessly, without manual intervention.
The formula I am using works from row 2 and down. It doesn't work on row 1.
Here is one of formula's that works on row 2:
=If(Or($A2=$A1,$A2=""),"", SUMIF($A:$A,$A2,H:H))
When I copy/paste it into row1 (to get the starting reference row), I get this:
=If(Or($A1=#REF!,$A1=""),"",SUMIF($A:$A,$A1,H:H))
The code copies the last row (in the case of a new sheet that would be row 1) and pastes' it into the next row down and then overwrites the first five cells. The problem formulas are NOT in the first five cells.
I tried to using $A65536, but it also #REF! error's out.
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
I have been trying to compile some monthly and annual data from our main sheet to a FY09 sheet (for the fiscal year 2009). The 2 tabs in the uploaded example are the Distribution tab which we use to track the status of every item and the FY09 tab where I need the totals to be calculated for each month as well as the entire year. I have tried several formulas I found while searching the forum but I can not seem to get any of them to work, (I am sure it is because I don't understand them very well).
Since any formulas used will need to be copied 200 or so times, I would really like a VB solution which should also reduce the physical size of the file. I also tried a pivot table but I do not think it will show everything I need.
Basically, I need all the items separated by month on the FY09 tab. Then column 'F' on the Distribution tab needs to be summed up for each item in column 'D' of the FY09 tab for the respective month and multiplied by the respective item price in column'C' with the total value going in column 'E'. Column 'D' and 'E' need to be summed up for each month and cumulative for the entire year. There needs to be an average items and value for each month as well as for the year.
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
We have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
View 3 Replies View RelatedI get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I'm working on a dynamic payroll spreadsheet that will automatically calculate the overtime worked in a week. Right now, I'm running into a snag. My issue is with the formula in Column R. Right now, as shown below, it is doing the calculation based on regular hours minus 40 to determine the OT time. The snag is very messy and it lay in this: while the row by row calculations for total overtime worked for the week is correct, the sum at the bottom is very much off. I need an accurate method to sum the hours of overtime for the given column.
Here are the guidelines for the pay periods and overtime:
1. The pay periods for the month go from the 1st to the 15th and the 16th to EOM (End of Month). This means that the pay period could end on any given day of the week. More on this in a moment.
2. A work week is defined as Sunday to Saturday.
3. Overtime is calculated based on the rule of anything over 40 hours in a given work week.
4. Holiday hours worked do not count towards the 40 hour mark in granting overtime since Holiday pay is automatically overtime.
If it were just a matter of a bi-weekly (every 2 weeks) pay period, I would simply state =IF(weekday(DATE)=7,Hours_Worked - 40,0), and tag a SUM(range) at the bottom. Unfortunately, with it being a semi-monthly (twice a month), the end of the pay period could be a Wednesday, so a reference to day of the week won't work unless the formula can dynamically determine which set of data to evaluate.
I'm completely willing to toss out the current method of determining overtime. This is the calculations sheet that references a cleanly formatted and designed time card on a tab called "Time Card", so this isn't the full workbook. In fact, once the whole thing is done, this calculation sheet will be hidden.
Columns M and N (which are formula referenced in Column P) are basic End - Start calculations and were hidden to simplify the display as well as the number of formulas displayed.
Column L (formula referenced) is a Yes/No display for if the date in question is holiday pay.
Excel 2003
H
I
O
P
Q
R
S
1
Start Work
Time Out
Day Count
[code].....
how do i get excel to automate quarterly calculation? in column A1 I have Year and column B1 i have months (1-12) i have data in column D1 - H124 - I would like to run a macro where it will pick up Jan, Feb, march (1,2,3) for each year in column A and do a quarterly average right now i manually use =(D35*31+D36*28+D37*31)/90 but i would like to avoid human errors can i get excel to read if column B is 1,2, and 3 run quarterly average? and would excel know that in Feb there is only 28days except leap years?
Each quarter should have the bars standing next to each other, i.e. Q1 2013 should stand right beside Q1 2012. Between these pairs of quarter there should be a small space and the the next pair, Q2 2013 and Q2 2012, should be. So how do I do this?
When I use data without stacking several info in the same bar, this isnt a problem but when I have this "aaa, bbb,ccc,ddd" in every bar, this gets messed up.
I use Excel 2007 , I created Interest calculator , on Daily basis , to caluculate interest , compounded quarterly.
But I want to make it compact , as d one I created is long enough.
A3 = Principal Amount
B3 = Date of Investment
C3 = Interest as on Date
D3 = Number of Days , amount Invested {comes out of formula set}
E3 = Rate of Interest
Now in F3 I want the Interest amount , compunded quarterly.
Some times NUMBER OF INVESTED CAN BE LESS THAN 90 DAYS TOO...then what ?
I am very new to excel and my formulas dont add up.
I need to calculate based on my quarterly goal and my quarter to date actual sales what my percentage pacing is.
Now the way i did it is =B5/A5
Do i need to add the Quarter date calculations in there because its not giving me the accurate percentage.
Goal Actual Pacing
summarize quarterly data in the summary table taking into consideration the months and the district. see the attachment for a more clear picture.
View 4 Replies View RelatedMy lookup formula is not hitting the correct period. How can this be adjusted without changing any of the "GRAY" data.
View 2 Replies View RelatedI have a column that contains dates for an event. I would like to tally quarterly and yearly totals for these dates. What formula can I use to accomplish this?
View 1 Replies View RelatedI'm lookng for a way to add functionality across tabs in a spreadsheet where if you put a date and $ amount in different cells on an expense sheet, it recognizes the date of the amount input and it shows up in another tab with a list of monthly expenses.
View 4 Replies View Related